3.5tonne enclosed trailer with tilt and flat floor
Internal measurements are 7900x2400x2050
Full width tailgate as loading ramp and flap, with tilt function any vehicle can be loaded without removal of front bar. Rear door has load assist tension spring for 1 person operation.
Design for 1person load and unload with 12,000lb remote control winch
Has 12v LED lighting and solar input for maintaining battery along with mains input. Also has LED loading lights for late load ups.
Trailer is made from Australian steel and main rails are 6x2 with 4mm wall, and portal frame is 50x50x2mm and in coated in commercial epoxy grey scratch and chip resistant.
Side are 1 peace 4mm aluclade siding with bottom 600mm in diamond aluminium sheet and roof is 1 peace poly fibre composite. All mouldings are truck material and are 75x40x4mm
Tie down point are 4 wheel lock and load with remote ratchet for low clearance cars.
Trailer has the ability to carry from small sedans to full size sport sedan, Was designed to carry super 3 car without the need to remove front bar.
Overall dimensions are 10x2.5x3.1m and all lighting is Narva LED clearance and tail along with reverse camera fitted,
Use-full for Circuit Racing cars, Speedway, Off Road and Motorcycles.
Please feel free to contact for more information.
Suspension is 3.5t load sharing rocker type and set up for the addition of 3rd axil, 4 wheel 10inch electric drum drum brakes with hand brake.
Trailer has only covered 1500km.
|Vehicle Location:||Mount Cotton QLD, Australia|