SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds
SOLD!

This one got away, but check related items for something similar.

SOLD!

This one got away, but check related items for something similar.

20
Sold13403 views16 watchingupdated a year agocreated 3 years ago
Share
Watch

R32 GTR RWD TRACK CAR (COMPLIABLE!!)

$80,000
Nissan
Make
Skyline
Model
1991
Year
Lonsdale SA, Australia
Location
6U9000BNR32212261
VIN / Engine Number

Meticulously built R32 GTR track car, ground up rotisserie rebuild, every nut and bolt either replaced or cleaned/painted. Painted under carriage with minimal damage on both rails/sill panels. Originally built as a drift car it has been converted to RWD using a R33 Rb25 box, but comes with all the gear to turn it back into its former 4WD Godzilla glory with a R32 GTR gearbox and transfer case and all the 4wd gear including sump/front diff and hi octane hi capacity sump. It’s done no competitive driving and 3 to 4 shake down days and has been laid up since. Interior is basic but functional retaining factory cluster and electronic boost controller with a Nardi steering wheel and Velo Seat/Harness. It has a cams approved 6 point roll cage fabricated by Walker Chassis in South Australia with NASCAR style intrusion bars. This car is beautiful and I don’t really wish to sell it but could do with the extra cash to cover the covid tax on a new house. Buyer won’t be disappointed!

As a little kicker if someone wants to work hard for it, it can be registered but would require an interior and cage to be removed. It has the paperwork and vin number to get complied in Australia which would bring the value up tremendously.

Engine:
- ARP head studs
- Tomei head gasket
- Nissan VRS gasket set
- Genuine NEW R33 GTR balancer
- R33 power steering pump
- NGK Iridium spark plugs
- HKS BNR34 stage 1 cams
- BNR34 crank angle sensor
- BNR34 crank
- BNR34 rods
- CP forged piston (9:1)
- Tomei adjustable cam gears
- ASR RWD sump
- N1 oil pump + High-Octane billet gears
- Nissan NEW water pump
- Gates timing belt
- ID1000 injectors
- Billet fuel rail
- Blitz dual SBC I colour boost controller
- Nisstune ECU
- Tomei fuel pressure regulator + gauge
- Splitfire coil packs
- HKS adjustable actuators
- GT2560R turbos in GTR cores
- Walbro intank fuel pump
- Xtreme 200mm sprung clutch
- RB25 gearbox
- Single piece tail shaft
- Defi boost gauge
- Solid Mechanical oil catch can
- High-Octane rocker cover baffles
- Empire stainless front pipes and 3" straight through exhaust
- R34 GTR dump pipes

Chassis:
- MCA blue series coil overs
- Cusco rear upper control arms
- Hard Race front upper control arms
- Ikea formula front lower control arms
- Genuine Nissan NEW front and rear wheel bearings
- KAAZ 2-way rear LSD
- Walker Cams approved cage-- Nascar door bars
- NEW front tie rods
- NEW front tie rod ends
- Bride seat rail-- modified to take Velo
- Velo Podium 2 seat
- DBA rotors
- CL front brake pads
- Braided brake lines
- Koyorad radiator cap
- Cusco front strut brace

Body:
- Genuine NEW N1 front bumper (Just Jap)
- Just Jap carbon front lip
- Just Jap carbon bumper vents
- Just Jap carbon rear wing
- Enkei RPF1 18x10.5 +15 (x2) 18x9.5 +15 (x2)
- Genuine N1 side skirts
- Full respray in Gloss Black (Beverly Collision)
- Fiberglass vented bonnet
- Flush Mount Aero Latches

Additional Parts:
- R32 GTR gearbox with transfer case
- R32 GTR two piece tail shaft
- Attessa system, lines and mounting hardware
- Front prop shaft
- Front drive shafts
- RB26 cast sump with diff
- NEW High-Octane sump extension
- RB26 factory oil pickup