SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

32 items in South Australia for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

All Results

10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car

Williamstown SA, Australia
Share
Watch
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.

Lockleys SA, Australia
Share
Watch
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.

Morphett Vale SA, Australia
Share
Watch
5
Only 1,527 Race kms since new. Sealed by Bates Motorsport to run in either TGRA 86 Series or TGRA Scholarship Series. Standard flywheel and starter motor supplied with engine. Will require series mandated lightened flywheel to run in the series. Supplied ex Adelaide.

Marleston SA, Australia
Share
Watch
11
Roll Cage
Log Book
Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine, blower etc available as a

Stirling North SA, Australia
Share
Watch
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.

Cherry Gardens SA, Australia
Share
Watch
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.

Cherry Gardens SA, Australia
Share
Watch
5
2.0L Milligton diamond series 2 engine. Engine has done 2 events since rebuild. Pistons, bearings, valves etc. Comes with Dta management, twin plate ap clutch and slave cylinder. 6 speed samsonas sequential gearbox. No events since freshen up. Comes with a second set of drop gears and some spares, dog rings etc. May separate. Engine will have to be sold first. Perfect Ford escort rally setup. Only selling as I am changing direction of what I am doing with the car. Engine is still in car and

Renmark SA, Australia
Share
Watch
9
Roll Cage
**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.

Hope Valley SA, Australia
Share
Watch
20
Roll Cage
Was being built to be a 6 second car. Setup for ls engine, powerglide trans, big single turbo(included). FIBREGLASS BONNET, BOOT ALL STEEL WALK OFF FRONT ALL STEEL ROOF, REAR QUARTERS BLACK CONVO PRO'S MCDONALD BROS FRONT END PRO 9 REAR END FULL FLOATER (40 SPLINE BILLET AXLES INC). ALL TIN WORK INCLUDED BIG DOLLARS IN WORK ALRAEDY COMPLETED (HAVE RECEIPTS). CONTACT FOR MORE INFORMATION.

McLaren Flat SA, Australia
Share
Watch
8
Chev 350 brodix heads stage 10 and match ported victor junior manifold. Flowed by Bill Hanson 800 hp with brand new stainless steel valves lapped in ready to go, just needs springs and rockers $2,300 ono . Also circlematic kit for powerglide trans new $600 ono.

Whyalla SA, Australia
Share
Watch
20
Roll Cage
Log Book
1966 Ford Sports Coupe Full mild steel chassis and cage All steel body with walk off front end 432 cube windsor / Powerglide / Transbrake 9' rear / New 35 spline strange axles and spool Willwood rear brakes / disc front New QA1 double adjustable front coil / QA1 single adjustable rear coils Simpson chute New pro 9 ladder bars Window net / passenger seat Andra Tech / logbook Car has run 6.07 @ 112mph 1/8th mile and 9.80 @ 134mph 1/4 mile (when running 6.30's) should run 9.50s but haven't raced

Meadows SA, Australia
Share
Watch
5
Honda K20 FD2 Mugen CN long block. 10 hours on engine as per logging data

Parkside SA, Australia
Share
Watch
9
Roll Cage
Log Book
NISSAN 300 ZX ROLLER, NO ENGINE OR TRANS FULL TUBE CHASSIS FOUR LINK REAR LIGHT WEIGHT SPINDLE MOUNT FRONT WHEELS 9 INCH DIFF WITH FULL FLOATER 40 SPLINE AXELS CENTERLINE CONVOPRO WHEELS BUILT FOR SUERSTOCK GAS CLASSES RAN 9.0 SECONDS 150 MPH IN D/GAS WEIGHT WITH 300 CUBIC INCH ENGINE WOULD SUIT TURBO CHARGED CLASSES

East Moonta SA, Australia
Share
Watch
17
Roll Cage
Log Book
xbody Mustang Drag car 383 Cleveland, chi heads and intake Mechanical injection new waterman’s pump T400 box with trans brake Methanol Ice Ignition with 2 step Current andra teched cage Tube front end, front clip Coilover front and rear 4 link rear Weld rims Just had tuned at just over 500rwhp Runs consistent low 6’s 1/8 and mid 9’s 1/4 Well sorted turn key car

Adelaide SA, Australia
Share
Watch
1
Brand New Unused still in original packaging IV-IX Sequential Gearbox Strong from Shift Gearboxes only delivered 2 weeks ago. For all information see: https://www.xshiftgearboxes.com/race-gearboxes/mitsubishi/mitsubishi-sequential-gearbox-evo-4-9-x-5-speed-strong

Lonsdale SA, Australia
Share
Watch
9
Bought new in 2005 bare, built for 2006 used for 1 year , have been on the shelf ready to go excellent condition ring Mark 0427930612

Penfield Gardens SA, Australia
Share
Watch
3
SSR GT1 19inch wheels are a brand new set of 4 in original boxes and never fitted on a vehicle, they are made in Japan and a premium quaility product. Come with hub centres and new wheel nuts to suit Nissan vehicles. Took 5 months to be delivered from ordering, cancelled Nissan Z project forced sale. Invoice available proving purchase of $2250 from a Autotechnic and genuine SSR wheels. Staggered set are 19x9 1/2 pos 35 and 19 x 10 1/2 pos 22 PCD 5X 114.3. Suited to many vehicles with 5x114.3 pcd

Norwood SA, Australia
Share
Watch
8
Brand new, never fitted. Changed direction with my build so surplus to requirements. Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S550 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 1⁄2-inch DOM tubing, BMR’s K-members give you a lightweight, extremely strong K-member. Ever

Burton SA, Australia
Share
Watch
10
Roll Cage
Log Book
Gary Hansen RaceCraft built (USA) ex Pro Stock, complete roller, Koni electric shocks, Race Pack dash, race pack SC 1000 data logger, Lamb brakes, Ron Davies radiator, 40 spline Mark Williams axels, Weld Magnum wheels.. too much to list Has gone 7.22 @ 191 mph, will suit a wide variety of classes This car has less than 200 passes Please call for more information

Andrews Farm SA, Australia
Share
Watch