SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

47 items in South Australia for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car

Williamstown SA, Australia
Share
Watch
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.

Lockleys SA, Australia
Share
Watch
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.

Morphett Vale SA, Australia
Share
Watch
16 1
Roll Cage
E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Upper Sturt SA, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
5
Only 1,527 Race kms since new. Sealed by Bates Motorsport to run in either TGRA 86 Series or TGRA Scholarship Series. Standard flywheel and starter motor supplied with engine. Will require series mandated lightened flywheel to run in the series. Supplied ex Adelaide.

Marleston SA, Australia
Share
Watch
11
Roll Cage
Log Book
Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine, blower etc available as a

Stirling North SA, Australia
Share
Watch
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.

Cherry Gardens SA, Australia
Share
Watch
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.

Cherry Gardens SA, Australia
Share
Watch
16 1
I have too many projects, so the 86 must go... This car can go back on the road with a few repairs to the right hand side and I haven`t checked but I think the forklift driver popped out the wheel hub when it was lifted as the wheels went form being straight before sale to one pointing out after delivery. I had plans to add a LS3 so it comes with a kit to mount a LS3 motor and a unused Velo extra large race seat. Fueltech wiring kits are available for the 86 to ls3 conversion and a 3 in 1

Sherlock SA, Australia
Share
Watch
16
Registered
Roll Cage
Ready to race and built for Circuit Racing and Time Attack, this is one of SA's fastest Evos! Or if you're looking for a very tough streetcar, it's fully road registered, and in a couple hours you can swap over to the street parts and drive it every day. You're basically getting 2 cars in one depending on what you want to do with it. It's won SA Time Attack trophies in every event it's ever entered. Fresh built 2.35 Stroker with only 100kms since rebuild. Making 377kw @ 32psi on e85 track tun

Park Holme SA, Australia
Share
Watch
20
Registered
Roll Cage
1 Owner 49,**** Kms Race Red 6 Speed Manual Herrod Performance - Compliance Pack 670HP @ the Flywheel (minimum) Roush/Ford Racing R2300 2.3L TVS Supercharger Large Air-to-Water Intercooler System Oversized, Full-Face Low Temperature Heat Exchanger Degas Bottle High-Flow Rate Fuel Injectors Custom Aluminum Fuel Rail Formed Molded Hoses Twin 60mm Throttle Body with Matching Spacer Custom Cold Air Induction System Washable, High-Flow Dry Air Filter Heavy-Duty, First Sheave FEAD System Roush/Ford R

West Lakes SA, Australia
Share
Watch
5
2.0L Milligton diamond series 2 engine. Engine has done 2 events since rebuild. Pistons, bearings, valves etc. Comes with Dta management, twin plate ap clutch and slave cylinder. 6 speed samsonas sequential gearbox. No events since freshen up. Comes with a second set of drop gears and some spares, dog rings etc. May separate. Engine will have to be sold first. Perfect Ford escort rally setup. Only selling as I am changing direction of what I am doing with the car. Engine is still in car and

Renmark SA, Australia
Share
Watch
32
Roll Cage
Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) brakes - need plumbing and finishing off turbo - either new or recon original (not

Mount Barker SA, Australia
Share
Watch
17
Registered
Roll Cage
Road registered in SA, this GTR (import) has been professional built to a very high standard and current set up would suit the new half cage 120 Challenge tarmac Adelaide rally category. Many options of either returned to daily road use as it has a working Air Con with a mix of hill climbs and track days or upgrade the cage to tackle full competition tarmac rallying. The gun metal grey paint is in good condition under the Mclaren orange wrap. Modifications include: * Hollinger 6 speed sequentia

Norwood SA, Australia
Share
Watch
13
Registered
2018 Subaru BRZ TS 45,XXX KMS Ideal Street and Track Car, built with supreme reliabilty and performance! Engine Modifcations: -Invidia N1 Cat Back Exhaust -Tomei Equal Length Headers with Over Pipe -Zeitronix Flex Fuel -Cosworth Inlet Hose -Perrin CAI -EcuTek Race-Rom Tuned By S&J Automotive Suspension & Brakes: -Upgraded STI Brembo Brakes to Spec R STI 6 Pot Front Calipers with Endless PC35 Pads/DBA T3 Discs -MCA Street Series Coilovers -Whiteline Rear Sway Bar -Whiteline Gearbox Mount B

Edwardstown SA, Australia
Share
Watch
9
Roll Cage
**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.

Hope Valley SA, Australia
Share
Watch
20
Roll Cage
Was being built to be a 6 second car. Setup for ls engine, powerglide trans, big single turbo(included). FIBREGLASS BONNET, BOOT ALL STEEL WALK OFF FRONT ALL STEEL ROOF, REAR QUARTERS BLACK CONVO PRO'S MCDONALD BROS FRONT END PRO 9 REAR END FULL FLOATER (40 SPLINE BILLET AXLES INC). ALL TIN WORK INCLUDED BIG DOLLARS IN WORK ALRAEDY COMPLETED (HAVE RECEIPTS). CONTACT FOR MORE INFORMATION.

McLaren Flat SA, Australia
Share
Watch
8
Chev 350 brodix heads stage 10 and match ported victor junior manifold. Flowed by Bill Hanson 800 hp with brand new stainless steel valves lapped in ready to go, just needs springs and rockers $2,300 ono . Also circlematic kit for powerglide trans new $600 ono.

Whyalla SA, Australia
Share
Watch