SSR Enabled

52 items in Victoria for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
7

2018 Camaro ZL1 Track car. Immaculate condition, 19,500klms. Exhaust system, spare set of spare wheels and tyres. Services and ready for your next track day

Emerald VIC, Australia
4

Brand new Samsonas Motorsport dogbox. 6-speed H-pattern with aluminium case. Never used or fitted - still has "No oil" tag on it. Comes with: - Bellhousing to suit many 6-cylinder BMW engines - Samsonas shifter - Motorsport Systems shiftcut gear knob - Input shaft to suit BMW S54 Was bought for a race E46 M3 but plans changed. Available immediately in Gisborne, Victoria - can deliver to Melbourne and surrounds within reason. Can possibly get to Sydney with a friend by December 12.

Melbourne VIC, Australia
4

Fully fresh Chev engine with 0 laps, Brodix 12 degree heads with clements CNC ports, h/d Bowtie block, Callies l/w crank, new Oliver rods, JE pistons, MSD, Jesel timing belt, w/pump etc, suit dry sump setup. Genuine 680hp.

Traralgon Victoria, Australia
10

OTR sprintcar chassis kit (low bar), circa 1984/85. Chassis #45 is the first car Max Dumesny drove for the John Sidney/ Ovaltrack Racing outfit, as seen in Tony Loxleys brilliant 1986 publication, "Sprintcars" Comes as per current photos, including period-correct engine plates, dash, bead-rolled floor, combo (steering) arms, exhausts, torsion bar stops, torque ball housing, top & front wings, jacobs ladder & bonnet. Chassis is in unrestored, as-raced condition, including original red chassis pai

Geelong VIC, Australia
10

BMW E30 M3 Replica. EOI - This has a full fibreglass 1 to 1 kit, more than 20 parts to it. - Car has also got a m52 B28 engine swap. - Custom satin white vinyl wrap with Warsteiner livery - Sparco seat only 2 yeas old - Harness only 2 years old - Big brake kit on front from rx7 turbo - rotors have seen 5 track days and pads are new - Koni adjustable shocks all round, Eibach springs in front and custom coilover King spring in rear - BBS reps with bolt on hubcentric spacers - LSD diff - Short s

Port Melbourne VIC, Australia
7

intercomp corner weight scales EZ weigh SW500 intercomp scale levelling pads 2.5" x 4 intercomp turn plates x 2 intercomp wheel clamp x 2 intercomp camber/castor guage custom wheel alignment bars with height adjustment all components are in good working condition, this package is priced very attractive

Croydon South VIC, Australia
10

Unfinished Nissan Bluebird TRX series 3 drift project car currently running. Perfect vehicle for someone with mechanical knowledge with time or likes to tinker and has space to store. Running S13 engine and gearbox, coil overs with new battery and Hankook tyres. Perfect drift or improved production or track day vehicle which has a lot of potential. Have spares included including standard steering rack, rotors and brakes, subframe including engine crossmember and wiring loom and standard diff and

Box Hill VIC, Australia
4

Super T10 close ratio gearbox. Near new Richmond alloy case Super T10 upgraded by Modena Engineering with a straight cut dog engagement gearset, new input shaft and rollerised main shaft. Ratios are 1st: 2.43:1 2nd: 1.61:1 3rd: 1.23:1 4th: 1:1. Input shaft 26 spline; main shaft 32 spline. Only 700km use in a 450hp car. $6,250

Braeside VIC, Australia
7

New RB30/25 motor - just run in generating 330kw @16p, running on 98 fuel ASR High volume sump Hypergear ATR43G3 Turbo SRI upper front adjustable camber arms SRI upper and lower rear adjustable camber arms Cusco 1.5 LSD Excedy ceramic clutch BC R-Spec dual adjustable coilovers Brown Davis roll cage AT catch can Power FC ECU 2 sets of wheels and tyres with as new Yokohama 050 (1 test day only) New front spoiler along with various carbon fibre components (not fitted) Ferodo pads / slotted discs -

The Basin VIC, Australia
9
Registered

2002 HSV VX Clubsport R8 Series 2 Factory Manual, Sunroof, Leather Coulson Optioned Car Rare Shanghai Red -Head and Camshaft Package -VCM OTR Intake -3” X-Force Catback / Pacemaker Headers -4:11 Diff Gears -Transbreaked TH350 Transmission w/ Dominator Stall Converter -B&M Stealth Ratchet Shifter -Pedders Coilovers Front and Rear -Simmons FR22s -Full Sound System Inc Double Din Headunit/Sub Amp -3 Months Victorian Registration -Clean PPSR History - No Accident History or Finance Owing

Clayton South VIC, Australia
9

364ci Chev motor, 690hp/700hp, dash12/12degrees Brodix heads, Wanye Randall built, titanium valves, JE Pistons, 3.48 stroke, Kellys crank. Great motor, fresh ready to race, all the best parts

Traralgon VIC, Australia
6

Motec products: Motec C125 dash Amp connector, Page buttons and data cable etc. purchased brand new last year and never used, $2400 ono ****SOLD**** Motec M800 ECU came out of the Toyota Corolla Sportivo Group NP rally car running a 3SGTE fully enabled ECU, even have the wiring harness if that is of interest. $1800ono ****SOLD**** Motec ADL Dash also from the Group NP rally car, have autosport connnector etc. $500ono All enquiries welcome Contact Jimmy: PH: 0421128272

Yendon VIC, Australia
13

Better than a complete engine as you can see exactly what you are buying, and then have your own engine builder re-assemble it! This is the silky smooth, 3.2L inline 6 cylinder from the updated E36 M3. The engine is apart but all parts are included. The engine was lifted complete from a 1997 M3 with 170xxx on the clock. It was torn down, and all work done so far, by an engine builder. Head has been stripped and cleaned. Block still has crank and pistons in it and has not been touched. Engine c

Moorabbin VIC, Australia
10
Registered

Unfortunately the time has come where I have to consider moving on my pride & joy as a means to consolidate the toys. I purchased my 1M almost 2 years ago in 100% factory trim, and to say it has been anything less than spectacular is an utter understatement. This 1M has hands-down been the best driving experience I’ve ever had to-date, and has blown all of the ‘hype’ surrounding the car well out of the park. For those who are aren't familiar with the car, the BMW 1M was a passion project conduc

Endeavour Hills VIC, Australia
14
Registered
Log Book

I've owned this for approx. 10 years and has only been used as a weekend car. In my care it has always been garaged (& covered), and well maintained. The interior is in great condition (headcloth replaced in 2020) and all accessories are fully functional. It has only been run on 98 fuel, and only top brand fully synthetic oil ever used. The car is in stock condition with no aftermarket accessories. The car has two fully functioning keys and a separate glove box key, and all original manuals.

Highett VIC, Australia
16
Registered
Log Book

Originally a White 1999 E46 318i converted to M3 sedan with complete running gear wide wheel arch upgrade. Donor vehicle with 120,000km E46 M3 Very String S54 motor, 5 speed gearbox with Lightweight single mass flywheel and HD clutch, upgraded gearbox mounts. M3 Differential Grab yourself a great track car, or complete the set up for a rally car or improved production. Many expensive upgrades completed already and money not an issue set up. Turner Motorsport Sway bars front and rear Turner Mo

Oakleigh VIC, Australia
7

Toyota Corolla Seca twin-cam liftback / Sept '86 built AE82 / 4AGE twin-cam motor & 5-speed. Car has all the original limited edition Twin-Cam features including factory alloys (5), steering wheel & gear knob, power steering, air conditioning, original seats, door trims & headlining. Externally the paint & body is original and overall car presents well for it's age, both inside & out and also runs & drives well. Selling without registration Further detailed images available for potential buye

Geelong VIC, Australia
9

Brand new set of 4 Hoosier slicks. The size is 225 50 16. I run hankook two liners on my commodore and bought these to give a try. Unfortunately the Hoosiers are not made to the same dimensions as it says on their chart. The tyres are actually 10 inches wide. (not 9") and they are meant to be 627mm in diameter but are about 615mm. And I can't send them back to the tyre shop. I paid $2470.00 but am prepared to take a hit to move them on. They are compound A7 softs

Kyneton VIC, Australia
8
Registered

This is one of only two Vegantune Evante's in Australia to my knowledge and one of 100 in total. Vegantune were in the business of building 1600cc 4 cylinder F3 and Formula Atlantic engines based on Ford Kent blocks. The Evante was developed as a result of Vegantunes experience rebuilding Lotus Elans with the UK Lotus specialist Spydercars tubular backbone chassis and their own engines in a variety of specs. They enlarged it to 1700cc and offered it mainly in 140bhp or 160bhp versions, Mine's

St Kilda VIC, Australia
1

As New condition, as has only been used very small amount of times Size: M 11120M as new condition.

Croydon South VIC, Australia