SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

21 Nissan for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

All Results

26
Registered
Roll Cage
Looking to move on my 1993 Nissan Silvia S13 rolling shell. This car has had around $8,000 worth of suspension and chassis work done in the last year. The car has been driven one time since I reconditioned the full rear end, and everything in the front is brand new and hasn't seen the road yet. Every single bush, ball joint and arm is brand new front to back, the car has clean tags however the rear guards have been cut for over fenders. The engine bay was freshly painted a few years ago and loo

Werribee VIC, Australia
Share
Watch
6
1997 R33 GTR 16x,000 kms R35 coilpacks with Raceworks billet bracket HKS Coilovers Twin plate clutch Wedsport TC105 New S3 Front lip Oil filter re-location Ganador side mirrors Momo Monte Carlo wheel (will come with stock steering wheel) Based in Melbourne but happy to assist with transport

Reservoir VIC, Australia
Share
Watch
5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
7 1
Roll Cage
Log Book
* Immaculate and brilliant car, fully rebuilt and extremely fast. Proven lap times and results. * In car video - https://www.youtube.com/watch?v=8RxlloddqFg&t=220s * Times - 1:13.6 at Mallala. 1:41.9 at Philip Island * 2nd at Island Magic 2023 IPRA * Cams log booked IPRA Details: * Fresh forged VCT engine built by Allan Engineering * Borg Warner EFR turbo * Custom radiator/intercooler with ducting * Full race rewire with Motec PDM 30 and keypad * Autronic SM4 ecu with flatshift * New Holinger

Tea Tree Gully SA, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
3
Roll Cage
Log Book
1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.

Hindmarsh SA, Australia
Share
Watch
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Braeside VIC 3195, Australia
Share
Watch
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S

Adelaide SA, Australia
Share
Watch
10
Nissan pulsar N15 SSS. The original plan was a 24 hours of lemons car but that didn't happen so down the rabbit hole we went and replaced everything. Fully reco SR20 by hoppers heads, new bearings, rings, and all seals in the head. NEW. Extractors. Remote oil filter. Large alloy Radiator. Radiator fan. Front end joints. Front and rear suspension. Exhaust. Rear brake callipers. Winmax Racing brake pads. Rear sway bar. Bridgestone potenza RE003. Bond bolt in cage. 6 point harness. Fire extin

Werribee VIC, Australia
Share
Watch
14
Was $79,950$76,500
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch
9
Roll Cage
Log Book
NISSAN 300 ZX ROLLER, NO ENGINE OR TRANS FULL TUBE CHASSIS FOUR LINK REAR LIGHT WEIGHT SPINDLE MOUNT FRONT WHEELS 9 INCH DIFF WITH FULL FLOATER 40 SPLINE AXELS CENTERLINE CONVOPRO WHEELS BUILT FOR SUERSTOCK GAS CLASSES RAN 9.0 SECONDS 150 MPH IN D/GAS WEIGHT WITH 300 CUBIC INCH ENGINE WOULD SUIT TURBO CHARGED CLASSES

East Moonta SA, Australia
Share
Watch
12
Roll Cage
Log Book
R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also have a Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage, Fire bomb. radio fo

Brunswick East VIC, Australia
Share
Watch
28
Roll Cage
2002 Nissan Skyline R34 GTR MSPEC tuned by Full Stage Japan HKS STEGE III 2.8L STROKER KIT GT2530 x 2 EVC F-COM NEW GEAR BOX (GETRAG) CARBON TRIPLE PLATES CLUTCH IKEYA FORMULA LOWER ARM INJECTORS FUEL DELIVERY FUEL COLLECTOR TANK ARC RADIATOR FRONT INTER COOLER TRUST MUFFLER CARBON DOORS CARBON BONNET CARBON LID DRY CARBON REAR WING ENDRESS BRAKE CALIPER (MONO BLOCK) NISMO METER BOOST 1.2 550 ~ 580 PS BOOST 1.7 600 ~ 630 PS Only ran 300kms after the engine build Car is still in Japan $180,0

Adelaide SA, Australia
Share
Watch
5
Roll Cage
Log Book
Sports sedan raced 180 SX , worked Turbo SR20 with standard gear box, Skyline front and rear uprights with Koni coil overs. 180s diff fabricated housing with 2 diffs ( 1:3.9 and 1:4.2).Motec ECI , full Cams cert roll cage and log book. Fibreglass doors, hatch , Bonet and front guards, ex Holden super car rear wing, fuel cell, race seat and window net. I could never drive it to its potential. Last driven 2019 Bathurst 6 hr. Health issues have limited my racing unfortunately. I have a car trailer,

Dromana VIC, Australia
Share
Watch
11
Roll Cage
Log Book
1992 S13 Nissan Silvia. SR20 DET Log Booked Race Car 8 Point Tower to Tower roll cage. Comfortably fits 6’4” driver MCA coil overs with remote reservoirs SR20 built and tuned by JPC 260kw at the wheels Garret Turbo Intercooler sprayer Motec Computer with standalone engine loom Motec Dash S14 5 speed built by Neat Gearboxes 2 way Diff Strengthened S14 rear subframe Fully adjustable rear suspension with alloy knuckles S14 front X member and strengthened LCAs Alloy fuel tank Surge tank Braid raci

Victoria, Australia
Share
Watch
12
Roll Cage
Nissan S13 Silvia with S15 front RB26DETT fresh -7’s Forged internals Nitto oil pump & collar Remote oil cooler & filter Custom catch can & overflow HKS cams (264 9.1) HKS injectors, Bosch fuel pump Custom front pipe & side pipe Motor originally built by Top Fuel Japan, has had rings and bearings done since, linished & straightened crank, new rods & pistons. Nitto head gasket Rb25 gearbox with 26 internals (better synchromesh etc) 200mm xtreme twin plate clutch Nissan 4 pot front brakes DBA roto

St Marys SA, Australia
Share
Watch
11
Roll Cage
S14 s1 RB25de+t (160-180psi compression across all 6) High mount td06-20g on helps external gate Mani. 1000cc injectors on e85 Freddy plenumn Vipec r34 ecu so runs s2 coils and is mafless. Rb25 box with gkteck detent spring upgrade. Short throw shifter with extended shifter. HD organic clutch with plenty of meat left on it. 5 bolt rear end. Powered by max drop knuckles front and rear. Gktech arms all round minus rear lcas. Twin r32 caliper rear for hydo setup. Boosterless brake system for extr

St Agnes SA, Australia
Share
Watch
7
Registered
race ready no expense spared r35 cams approved cage terra trip rally safe Stilo full KW canister shocks fully adjustable just been rebuilt worth $$$$$ full just jap gear box with gear set 11 plate clutches billet baskets Dodson at a cost of $25000 exchange about 2 events old billet front Dif housing hard race adjustable rear arms hard race front top arms rose jointed adjustable rear adjustable front adjustable sway bars and bushing winged seats fire bomb plumbed in engine and feet akropovi

Klemzig SA, Australia
Share
Watch
18
Major upgrades include, uprev tune 5 stage by rev zone, 230kw @ 6764rpm (315kw at fly wheel) coil overs with eibach linear springs - 9.5kg rear / 11kg front. Cusco RS 1.5 weigh LSD Z1. Motor sport dif cooling cover AP racing 6 pot front brake kit with endless ME20 pads. Akebono 2 piece rear rotors with endless ME20 pads. Stillen front splitter Stillen front canards. Z speed aluminium under shroud. Rev Zone custom front alloy under tray. Evo R rear wing, Stillen gen 3 long range intakes, Stillen

Thomastown VIC, Australia
Share
Watch
4
RE LISTED Nissan Exa Sports Sedan ROLLER Cams log book Well known Victorian car. Full space frame / fibreglass panels. Built to suit 20b rotary. Left hand drive. Lots of original spares, supra gearbox and remote shifter, tail shaft, R200 diff (plus spare) Full 20b exhaust system, muffler and side outlet. Moulds, spare fiberglass bonnet and front spoiler, clutch & flywheel, front engine mount & engine / gearbox mount plate. 16x10 wheels with slicks and spare 15x10 with wets. Fuel tank, lines with

Macedon Ranges, VIC, Australia
Share
Watch