SSR Enabled

38 items in Victoria for sale

Refine Search

Clear All

Brand new Samsonas Motorsport dogbox. 6-speed H-pattern with aluminium case. Never used or fitted - still has "No oil" tag on it. Comes with: - Bellhousing to suit many 6-cylinder BMW engines - Samsonas shifter - Motorsport Systems shiftcut gear knob - Input shaft to suit BMW S54 Was bought for a race E46 M3 but plans changed. Available immediately in Gisborne, Victoria - can deliver to Melbourne and surrounds within reason. Can possibly get to Sydney with a friend by December 12.

Melbourne VIC, Australia

Fully fresh Chev engine with 0 laps, Brodix 12 degree heads with clements CNC ports, h/d Bowtie block, Callies l/w crank, new Oliver rods, JE pistons, MSD, Jesel timing belt, w/pump etc, suit dry sump setup. Genuine 680hp.

Traralgon Victoria, Australia

OTR sprintcar chassis kit (low bar), circa 1984/85. Chassis #45 is the first car Max Dumesny drove for the John Sidney/ Ovaltrack Racing outfit, as seen in Tony Loxleys brilliant 1986 publication, "Sprintcars" Comes as per current photos, including period-correct engine plates, dash, bead-rolled floor, combo (steering) arms, exhausts, torsion bar stops, torque ball housing, top & front wings, jacobs ladder & bonnet. Chassis is in unrestored, as-raced condition, including original red chassis pai

Geelong VIC, Australia

Super T10 close ratio gearbox. Near new Richmond alloy case Super T10 upgraded by Modena Engineering with a straight cut dog engagement gearset, new input shaft and rollerised main shaft. Ratios are 1st: 2.43:1 2nd: 1.61:1 3rd: 1.23:1 4th: 1:1. Input shaft 26 spline; main shaft 32 spline. Only 700km use in a 450hp car. $6,250

Braeside VIC, Australia

364ci Chev motor, 690hp/700hp, dash12/12degrees Brodix heads, Wanye Randall built, titanium valves, JE Pistons, 3.48 stroke, Kellys crank. Great motor, fresh ready to race, all the best parts

Traralgon VIC, Australia

Motec products: Motec C125 dash Amp connector, Page buttons and data cable etc. purchased brand new last year and never used, $2400 ono ****SOLD**** Motec M800 ECU came out of the Toyota Corolla Sportivo Group NP rally car running a 3SGTE fully enabled ECU, even have the wiring harness if that is of interest. $1800ono ****SOLD**** Motec ADL Dash also from the Group NP rally car, have autosport connnector etc. $500ono All enquiries welcome Contact Jimmy: PH: 0421128272

Yendon VIC, Australia

Better than a complete engine as you can see exactly what you are buying, and then have your own engine builder re-assemble it! This is the silky smooth, 3.2L inline 6 cylinder from the updated E36 M3. The engine is apart but all parts are included. The engine was lifted complete from a 1997 M3 with 170xxx on the clock. It was torn down, and all work done so far, by an engine builder. Head has been stripped and cleaned. Block still has crank and pistons in it and has not been touched. Engine c

Moorabbin VIC, Australia

Brand new set of 4 Hoosier slicks. The size is 225 50 16. I run hankook two liners on my commodore and bought these to give a try. Unfortunately the Hoosiers are not made to the same dimensions as it says on their chart. The tyres are actually 10 inches wide. (not 9") and they are meant to be 627mm in diameter but are about 615mm. And I can't send them back to the tyre shop. I paid $2470.00 but am prepared to take a hit to move them on. They are compound A7 softs

Kyneton VIC, Australia

Have for sale the following new brake pads PFC Shape 7778- 35 compound at 30.44mm thick - 8 sets - $500 p/set ( 6 piston Alcon ) PFC Shape 7797 - 06 compound at 29.44mm thick - 4 sets - $400 p/set ( 6 piston Brembo ) PFC Shape 7797 - 03 compound at 29.44mm thick - 2 sets - $400 p/set ( 6 piston Brembo ) Pagid shape E1619 - RS5 compound at 25mm thick - 3 sets - $425 p/set ( 4 piston Brembo ) Pagid shape E2557 - RS19 compound at 29mm thick - 3 sets - $580 p/set ( 6 piston Alcon ) Pagid shape E26

Altona VIC, Australia

Perkins Holden Slide manifold rebuilt by Ian Tate. Included in the sale price is the Manifold, Trumpets, Fuel injector rails and cold air box. (Will separate). All parts were removed from a new build engine as we changed direction for the build. All parts in very good order. Also for sale one set YellaTerra Holden V8 EFI 6.0L Alloy Dash9 Cylinder Heads complete with Valves, Guides, springs etc. Heads built up by Ian Tate for Sports Sedan Engine

Ringwood VIC, Australia

DJRP-17 MUSTANG Number Plates Victorian Plates. NEVER been on vehicle. Add the iconic Dick Johnson racing Team Penske number 17 plate to your Mustang.

Hampton East VIC, Australia

Supercharged Outlaw Hemi Keith Black block Brad V Heads Littlefield LB-22 Hi Helix 1471 New Diamond Pistons New BME Rods New Enderle 110 Fuel Pump This Engine comes Sump to Hat complete ready to run Comes with tune up etc $45,000 ono Pick up Somerville Andrew 0400 350 057

Somerville VIC, Australia

R.E.D race engine developments (Rob benson) ex WGR 18 degree chev race engine on offer for sale. Beautiful condition. Serious enquiries only.

Yarrambat VIC, Australia
$15,500 AUD

New LS2 Crate engine 6.0 Litre ( Brand new never started ) Higgins Cylinder Heads (CNC Ported, with stainless steel valves) Crow roller Cam and Crow Lifters with L7 lifter buckets Trunion upgraded kit Double row Timing chain Alloy dry sump pan (Savy) AFI dry sump balancer Stainless steel header pipes At extra cost can supply: LHS starter motor kit Dry sump pump kit including brackets

Pakenham VIC, Australia

Eddy current dyno for go-kart and superkart engines capable of 100HP applications. The perfect tool for developing engines to win on the track! Included: Computer with software High-speed cooling fan Acceleration lever Fuel tank Free training

Carrum Downs VIC, Australia

Scale and roll off leveling pads made to order. Aluminum designed to suit a 380mm x 380mm x 65mm scale pad. Handy design as the scale leveling pad separates from the roll off pad.

Dandenong VIC, Australia

We have for sale a used set of 3 way remote canister Penske shocks. These are currently dismantled & ready to be valved to suit the new owners application. These are well suited for owners of vehicles who compete in V8TC, Improved Production, Sports Sedans, or any Supercar from the late 90's to mid 2005 era. These will be sold complete with dyno graphs. Missing are eyelets which can be supplied new & spring seats to suit. Some wear marks are evident but are a good working system. Eye to eye open

Dandenong South VIC, Australia
$15,000 AUD

HMS V8 Supercar short motor. Motor has some new and used parts including new set of JE pistons, some new bearings. Includes a set of rods, crank and cam and other parts as shown in photos. Price is negotiable. Any questions please message.

Bendigo VIC, Australia

Selling one of the 2 XTRAC 383B 6 speed sequential transmission with hardly any use on.the Box. They where from a Race Team in the USA and only used for about 1,000Km than serviced and rebuild. But each season they get brand new from the sponsor New price was about £50,000 This Box can be yours for $17,500

Grovedale VIC, Australia

Side mount radiators. Suit historic F/Ford , F2 / F3 etc. $300.00 the lot.

Strathdale VIC, Australia