SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

246 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
4
Selling my 2.4l stroked evo 6, engine has just been fully rebuilt by Craig at Aurora Speed not a cent spared in the build. Car is currently not running as it needs engine wired up and a tune I’ve just lost interest in the car and need a car more suitable to get around on the daily my loss your gain, the engine build its self was over 20k+ Has brand new Excedy heavy duty clutch (put in with motor) Aftermarket lower rear control arms And plenty of other little added extras I’ve done to

Macksville NSW, Australia
Share
Watch
10
Roll Cage
Log Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

Burleigh Heads QLD, Australia
Share
Watch
15
Registered
Roll Cage
Puma 2 for sale $34,450 ono Puma 2 is powered by a Nissan s13 SR20DET (about 180rwkw) and has a 5 speed gear box. The colour is stunning and has the normal stone chips you’d see on a driven example. Puma 2 has: • 15x7 koya wheel (matching spare on the back) • Canvass roof • Racing rear roll bar and cross bar with fire extinguisher mount Puma Clubmans are a larger chassis to suit normal sized humans. The not so good is that Puma 2 could probably do with a new clutch, which I have and will

Canberra ACT, Australia
Share
Watch
19
Roll Cage
XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

Cairns QLD, Australia
Share
Watch
8
Registered
Log Book
2006 Ford Fiesta XR4 150K KM 12 months rego from Thursday 14 March Body and paint is good and presents very well, few stone chips as expected, front bumper needs a paint Interior is excellent condition, won't come with the Sparco but will include the seat base if needed. The original seat will come with the car and fitted. I have a brand new rear boot badge and rear vision mirror to fit + Cosworth Cams + Cosworth manifold (genuine) + 4-1 Miltek exhaust + Larger upgraded throttle body +

Maroubra NSW, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
9
Roll Cage
S13 Silvia drift / track car Driveline: 2JZ-GTE oem spec re-build HKS Cams and gears, Crower valve springs ARP Head studs Tomei sump baffles Fluidampr balancer GTX3584 Pulsar turbo, Turbosmart 50mm wastegate Custom turbo manifold R35 PRP coil kit BPP Fuel rail and 1250cc Injectors, FPR2000 regulator 2x Walbro 460 in-tank pumps Optima battery All Speedflow or BMRS Hoses and fittings Custom catch can Direct Clutch twin plate (new clutch plates 1 event old) Late model TR6060 gearbox

Oakford WA, Australia
Share
Watch
11
Registered
Log Book
Fabulous affordable performance car in a stylish package. BMW 135i M Sport - MY11 Fantastic car owned by current owner for close to two years. Condition at the time of purchase was so great, it was included on the showroom floor of BMW Geelong despite its age. Car has never had an issue and is in excellent condition. There are some minor paint chips on the front bumper but is otherwise cosmetically perfect, all paint is original, never been in an accident. Only selling due to recent purchase o

Rippleside VIC, Australia
Share
Watch
20
KEY FACTS * A highly modified, track-focused example of the transaxle modern classic sports car powered by a stage five hybrid turbocharged and fitted with a 951 inter cooler 3.0-litre inline-four, sending up to 600bhp to the rear wheels via a five-speed manual transmission with an odometer displays of only 176,231 km from new. * This 1990 Porsche 944 S2 has been modified as a track day focussed build, at a total cost of around $200,000 AUD and is noted as a Porsche Cup Winner and while signi

Caringbah NSW, Australia
Share
Watch
12
Roll Cage
Price reduced for quick sale way below replacement value Unfinished rebuild and freshen up project that stopped due to health issues Presenting a very well looked after 250-inch Dragster Rolling Chassis, constructed by Bill & Wayne Jones Weldwell Engineering in the early 90's. The chassis is suitable for a small block engine, either supercharged or naturally aspirated and could be run in a blown class like Supercharged Outlaws or Modified Easy to bring up to latest specs The chrome moly rol

Kurrajong Heights NSW, Australia
Share
Watch
15 1
Roll Cage
E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Upper Sturt SA, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
10
Registered
Clubsport R8 tourer 2012, manual.I have owned this vehicle for the last 8 years and all modifications have been done in those years. It’s making a safe 600rwhp and 990nm on pump 98. It was the wife’s daily driver when she was working but has not worked for a few years and since then has only been a weekender when we have the spare time. It has always been garaged and washed and serviced regularly. List of some Modifications are: -VCM 714 cam package -Magnuson heartbeat 2300 supercharger -NPC d

Wyee Point NSW, Australia
Share
Watch
9
Registered
CALLING ALL HONDA GEARHEADS! 1994 HONDA CIVIC EG, GLI HATCHBACK MANUAL 5th Generation JDM Civic 267,000 km Car is in original stock condition No modifications A TIMELESS CLASSIC Own a piece of Japanese automotive history! Known for their well-designed and engineered components. The engines, transmission and other vital parts are built to last! Honda has a reputation for high-quality manufacturing processes. The parts used in a Civic are of good quality and assembled with care. Known for

Southport QLD, Australia
Share
Watch
10
Roll Cage
Nissan 180sx Time Attack/Sprint/Hill Climb/Drift Car Car was serviced with new oils and filters recently in preparation for 2024 events. Car has previosly done the following lap times Queensland Raceway: National 1:19.44 Switchback 1:12.29 Sprint 56.20 Clubman 58.93 Sportsman 56.61 Lakeside: 58.5 Morgan Park: E layout 1:07.93 K Layout 1:23.5 Noosa Hill climb 61.84 Very fast car for the money and performs well. Would have to spend 3-4 times the price to go as quick with a modern car and up

Eastern Heights QLD, Australia
Share
Watch
10
Registered
Log Book
Beautiful condition, stage 3 engine by Rumble shack (old owner ) Tuned by upspec garage Exceedy hd clutch Process west front mount intercooler Process west oil cooler Kyb radiator Killer b sump Killer b catch can Surge tank Dual fuel pump and surge tank Id1300 injectors Blouch 2.5 xtr poker pickle Turbosmart external gate Phenolic spacers Afr gauge Grimspeed wastegate delete Whitline strut tops and sway bars Bilstein coil overs Spec r interior Semi sick tyres Performance brake pa

Appin NSW, Australia
Share
Watch
11
Roll Cage
Log Book
Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine, blower etc available as a

Stirling North SA, Australia
Share
Watch
20
Registered
- 403ci stroker - 2.9L Whipple supercharger - 1650cc injectors - Built TKO6060 6speed manual transmission - Twin plate western clutch services clutch - VF GTS 9.9” rear end - VF GTS brakes all round 22” - F22 3-piece Simmons - E85 - 104,490 km - Too many modifications to list.

Central Coast NSW, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch