SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

51 Nissan for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
11
Roll Cage
Log Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Helensvale QLD, Australia
Share
Watch
7 1
Roll Cage
Log Book
* Immaculate and brilliant car, fully rebuilt and extremely fast. Proven lap times and results. * In car video - https://www.youtube.com/watch?v=8RxlloddqFg&t=220s * Times - 1:13.6 at Mallala. 1:41.9 at Philip Island * 2nd at Island Magic 2023 IPRA * Cams log booked IPRA Details: * Fresh forged VCT engine built by Allan Engineering * Borg Warner EFR turbo * Custom radiator/intercooler with ducting * Full race rewire with Motec PDM 30 and keypad * Autronic SM4 ecu with flatshift * New Holinger

Tea Tree Gully SA, Australia
Share
Watch
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
9
Roll Cage
S13 Silvia drift / track car Driveline: 2JZ-GTE oem spec re-build HKS Cams and gears, Crower valve springs ARP Head studs Tomei sump baffles Fluidampr balancer GTX3584 Pulsar turbo, Turbosmart 50mm wastegate Custom turbo manifold R35 PRP coil kit BPP Fuel rail and 1250cc Injectors, FPR2000 regulator 2x Walbro 460 in-tank pumps Optima battery All Speedflow or BMRS Hoses and fittings Custom catch can Direct Clutch twin plate (new clutch plates 1 event old) Late model TR6060 gearbox

Oakford WA, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
10
Roll Cage
Nissan 180sx Time Attack/Sprint/Hill Climb/Drift Car Car was serviced with new oils and filters recently in preparation for 2024 events. Car has done the following lap times Queensland Raceway: National 1:19.44 Switchback 1:12.29 Sprint 56.20 Clubman 58.93 Sportsman 56.61 Lakeside: 58.5 Morgan Park: E layout 1:07.93 K Layout 1:23.5 Noosa Hill climb 61.84 Very fast car for the money and performs well. Would have to spend 3-4 times the price to go as quick with a modern car and upgrades.

Eastern Heights QLD, Australia
Share
Watch
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

Braeside VIC 3195, Australia
Share
Watch
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.

Launceston TAS, Australia
Share
Watch
17
Registered
Roll Cage
Road registered in SA, this GTR (import) has been professional built to a very high standard and current set up would suit the new half cage 120 Challenge tarmac Adelaide rally category. Many options of either returned to daily road use as it has a working Air Con with a mix of hill climbs and track days or upgrade the cage to tackle full competition tarmac rallying. The gun metal grey paint is in good condition under the Mclaren orange wrap. Modifications include: * Hollinger 6 speed sequentia

Norwood SA, Australia
Share
Watch
10
Roll Cage
Log Book
Nissan Bluebird George Fury Replica. CA18 Engine rebuild about 6 races ago. Forged bottom end on E85. Tilton twin plate clutch. Brand new from Nissan Z32 gearbox, new Kaaz race LSD in R200 independent rear. Coil overs, big brakes. Has electric load sensing power steering and steering reducer making this car feel like a go kart. Genuine V4 Simmons with near new tyres. Cams approved cage and log booked, wing seat. Spare car and engine, spare wheels and wet tyres. Many more spares and lap top for

Launceston TAS, Australia
Share
Watch
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing

Marrickville NSW, Australia
Share
Watch
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

North Lakes QLD, Australia
Share
Watch
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S

Adelaide SA, Australia
Share
Watch
10
Nissan pulsar N15 SSS. The original plan was a 24 hours of lemons car but that didn't happen so down the rabbit hole we went and replaced everything. Fully reco SR20 by hoppers heads, new bearings, rings, and all seals in the head. NEW. Extractors. Remote oil filter. Large alloy Radiator. Radiator fan. Front end joints. Front and rear suspension. Exhaust. Rear brake callipers. Winmax Racing brake pads. Rear sway bar. Bridgestone potenza RE003. Bond bolt in cage. 6 point harness. Fire extin

Werribee VIC, Australia
Share
Watch
9
Registered
96 180SX Type X. I built the car to be a reliable street and track car. The next step was to cage and drive. As the story goes, I have sadly lost interest in the sport. I have owned the car for almost 10 years. Most of the driving was done before the rebuild and was a mix of weekend drives and supersprints. All works were completed by a trusted mechanic. The build helped me keep my sanity through cancer treatment. The car has travelled well under 2,000km since the rebuild. Overall, the c

Quakers Hill NSW, Australia
Share
Watch
10
Roll Cage
Log Book
Turn key supersprint car for sale; ready to roll in 2024 Supersprint Series NSW Overview of cars history: Originally a daily drive from new, then sold in 2017 to a father/son project team who commenced a club track car conversion spending on upgrades to include a Southbend competition clutch, Volk Ray wheels, Kuhmo semi slick tyres, KW shocks and SPL suspension components, 6 pot Brembos front and 4 pot rear, Borla cat back s/s exhaust, Kinetic inlet manifold and upgrades with Hotchkiss fro

Colebee NSW, Australia
Share
Watch
15 1
Registered
Roll Cage
Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

Cockburn, WA, Australia
Share
Watch
14
Was $79,950$76,500
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch