SSR Enabled

34 Mazda Car, Bike or Kart for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
9

MX5 - NB race/track car. We have just built this car up with a team to support the MWFoundation & its time to move to our next project. Images provide most info. In addition: - Engine over hall just complete - new timing belt, all hoses, race radiator, head gasket & fluids. - Clutch plate & fluids replaced - Braided Brake Lines installed - New coil overs - Yellow Speed Racing Premium Competition - New Sparca Sprint Seat - New 6 point Harness (to fit Hans Device) - New SAAS Flat Botto

Warriewood NSW, Australia
20
Roll Cage
Log Book

Purpose built log book track and hill climb car. 13B engine has had a complete rebuilt and balanced, rotors, housings, hardened apex race seals, dyno tune time on engine only since rebuild, 330kw at wheels, was running 380kw prior to rebuild, have tamed it down for drivability. Fuel E85 The radiator, inter cooler are custom made and vee mounted, oil coolers are much larger than standard and custom made. All connections are hiflow fittings. Custom built gear box with billet gears, taller first

Osborne SA, Australia
6
Roll Cage
Log Book

Selling new RX8 Bathurst 6 hr car, raced one event. Built to the Production regulations for the Bathurst event. Every component new and serviced. Spare package included with spare new engine and gear box and wheels. Over head Fuel rig included with new hoses. Perfect car to race reliably and cheaply in any 3E Production race or the Bathurst event.

Sydney NSW, Australia
7
$73,000 AUD
Roll Cage

Up for sale is my 13b turbo bridgeport rx7 that is track or race ready. Spent over 140k currently running on e85 with the wolgborner efi turbo has a full weld in cage. Endless brakes

Randwick NSW, Australia
4
$65,000 AUD
Roll Cage
Log Book

Presented for sale is my Mazda RX7 Sports Sedan. Originally built in 1994 by Norm Stokes it boasts a full space frame chassis. I am sad to see her go but another project needs my attention. Since purchasing the car it has only been used for 2 track days, no expense has been spared fine tuning this car to the standard it's presented in today. The car has been maintained by 8-time Gold Star Champions Team BRM in South Australia. Features, • Space frame Chassis • Built in 1994 • 6 Speed Sequen

Reynella SA, Australia
10
$55,000 AUD
Roll Cage

Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute

Geelong VIC, Australia
6
Registered

Everyone knows how good MX5's are, the rare SE factory turbo is special. 159500kms

The Vines WA, Australia
6
Roll Cage
Log Book

Open for expressions of interest is the “Silver Spud” - my 1979 Mazda 323 (Rear Wheel Drive) IPRA Improved Production car (3J rules). This car has been hand built by an experienced racer from the ground up with the best of everything. It has only three race meetings since completion, and is showing amazing potential as we progress with improved chassis tuning. If you are considering building your own EM turbo IP car, look no further. Here is a summary of the build sheet: Chassis: Clean, str

McLaren Vale SA, Australia
8
Roll Cage
Log Book

Mazda rx7 s2 Log booked ipra, New 13b extendport turbo gtx3582r. PWR Radiator and Oil cooler package. S5 Albins gearset turbo box. MF 3.9 lsd with Adjustable Watts Link. Cams Welded Cage. Willwood 6 piston 335mm floating front discs. Willwood 4 piston 298mm rear disc. Performance 17x9 Wheels with Yokohama 050 Currently on Run in tune 98 premium. Can run e85 at 450rwhp. Quality built car with lots of New parts.

Newcastle NSW, Australia
20
$46,000 AUD
Roll Cage
Log Book

Mazda Rx7 Track car. Lots of time and money spent. Freshly built 13b extend port race engine by Ric Shaw with perfect compression. Re-built Garret A/R .70 turbo, Knightsport V-mount intercooler. Adaptronic ECU (with extensive additional sensors) running a C125 Motech dash. Brand new DBA big brakes all around, 2 piece rotors with Project Mu pads. Twin Tial 38mm waste gates. Custom exhaust manifold, billet and reduced belt wheels. Set up on Flex fuel and tuned on E85 and 98. Complete new system i

Gippsland VIC, Australia
4
Roll Cage
Log Book

Many hours and dollars have gone into bringing this RX7 Sports Sedan back to track spec after sitting dormant since 2004. See start-up video https://www.youtube.com/watch?v=LPjiyKQ-SUY I purchased this car a couple of years ago and it went straight to the original engine builder John Perkins (VIC) who went through the mechanicals, freshened the engine and updated the MOTEC to an M1 package with new motorsport sensors through out. It has done dyno runs only since. It runs an early Racing Beat

Launceston TAS, Australia
9
Roll Cage
Log Book

Group Nc Historic Touring Car, current log book, immaculate condition, 20+ years of development. Matt Russell race engine, special PAR gear box, Hossack gear shift, two MFR limited slip diffs 4.44 and 4.77, full floater diff spare axle, Savy watts link, 5 sets of wheels and tyres (new wets), new stainless exhaust system, AES muffler, three sets of new brake rotors. Matching Carbon Race seats, original trim and back seat. Also available by negotiation is a customised trailer to suit, plus a co

Ballarat VIC, Australia
7
Roll Cage
Log Book

Log Book 3D Sports sedan, ground up rebuild, all new rose joints and bolts, new control arms, new MCA Shocks, new full mil spec wiring, New Motec M84 ECU, New C125 dash,all new master cylinders,brake line, oil lines, fuel lines, new fuel pumps and pressure reg, New GTR R32 diff and limited slip centre, AP Rotors and calipers, New PWR oil cooler, 3 sets 16" wheels, tyres are crap, all internal and under body sheet metal, some moulds, NO ENGINE OR GEARBOX, was 13b turbo and H6S holinger, still hav

Ipswich QLD, Australia
8

Motorsport Australia log book. Lightly raced. Currently competing Prod Sports 2b. 2 sets rims 17" and 18". Single turbo conversion with " indycar" modified new Garret turbo. Extensive work on underbonnet cooling. Bigger brakes with abs 8 spot and 4 spot. Hand built BC coilovers. Haltech computer, multiple pumps aem smart coils, currently dynoed and tuned to run 98 octane at 17 psi. Has new radiator and twin aftermarket oil coolers. Running fd drivetrain. Easily passes drive by noise tests. Uncut

Blackstone QLD, Australia
6

1/2 CHASSI CAR series 6 bridge port turbo Air shifted liberty Floating 9" 4 link rear Koni's plenty Shocks and sway bar Runs easy low 8's plenty more in combo MW Ignition Data Logger new parachute new front tyres new rear slicks new harness Andra and IHRA TECH INSPECTED

Marrickville NSW, Australia
10
Roll Cage
Log Book

The time has come for us to move on from our RX8 Cup Car. For sale is our 2004 Mazda RX8 Cup Car. This car is a regular in the top 5 on track with multiple podiums, but due to a lack of time to race it is time to move it on. It meets all current specs and is ready to roll straight onto the track and go racing for the remainder of the 2022 season or take some time and make it your own, ready for 2023 Included: • Motorsport Australia Log Booked • Engine: Engine was replaced last year and has

Monash ACT, Australia
26
Roll Cage
Log Book

Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip

Lilydale VIC, Australia
4
Roll Cage

2003 RS II Roadster MX5 Race Car for sale. Looks like funds are needed elsewhere. So up for sale is my Race car • 2003 RSII Eunos Import • Full Cage with side intrusion protection, everything is stripped out. It is a chassis, engine, cage, seat and steering wheel. • Tupperware body kit • Sparco Seat and SAAS Harness. • 1.8L VVT Engine – full rebuild just late last year with forged internals. • Custom intake behind front right headlight. Headlight backing removed for cool air. • 2.5” Custom Exhau

Newport NSW, Australia
12
$35,000 AUD
Roll Cage

Car was purpose built to run into the 7’s as a street driven car, just like all of spot on’s toughest cars. Car still has all body tags for registration! All work has been done by Spot On Performance in Brisbane. Full build gallery can be found here: https://www.facebook.com/media/set/?set=a.1214426645312666&type=3 No expenses spared on this build. Everything is BRAND NEW, NEVER RUN. Complete chromoly chassis 4 link rear with full floater spot on sheet metal 9” housing Billet strange cen

Brisbane City QLD, Australia
8
$78,000 AUD
Roll Cage
Log Book

Mazda RX7 Sports Sedan. Ex Ivan Mikac Go-Gear built car. Ground up restoration 2018-2020 including chassis/body, transaxle and engine. 2021 Tasmanian State Champioship winner. 12a turbo, Hewland FGB with long and short track ratios, 8 spare wheel centres. Short and tall drivers seats. Can assist with transport if required. May consider sports sedan project as part payment.

Devonport TAS, Australia