SSR Enabled

108 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
5

1 set of front and rear 2 way adjustable dampers and springs complete to suit Porsche 2011 997 Cup Car

Wangara WA, Australia
13

We are offering for sale various spare parts to suit Audi R8 LMS MY16-18 including some body panels, Ohlins TTX36 damper set, various spring sets, 2 x pairs of restrictors 38 & 39mm, 1 x pair open throttle body adaptors, 1 set of high stands, 2 x new Krontec LL24 air jacks, various control arms, camber shim sets, clutches and release bearing, Hoer Gearbox housing. Contact me for further information and pricing on parts or make an offer for the lot.

Blaxland NSW, Australia
6

Pirelli Pzero Rosso N4 295/30/18 Brand new. Never fitted Pirelli pzero rosso N4 98Y 295/30/18 1600 Located Stafford Brisbane, pick up preferred no

Stafford QLD, Australia
1

I have available a number of gear sets / dog rings suit Hewland LD 200 . All are in good to fair condition. Prices as listed or $ 2200.00 as a Job Lot . 1st Gear (with integral layshaft hub extension ) 2 x 16:35 $160.00 each Dog rings 2 off $120.00 each Gear Sets: 1 x 17:30 $150.00 2 x 17:29 $150.00 each 1 x 19:27 $150.00 1 x 20:30 $130.00 1 x 21:30 $150.00 1 x 22:29 $150.00 1 x 23:29 $150.00 1 x 23:24 $150.00 1 x 24:26 $150.00

Belhus WA, Australia
4

Hewland transaxle to suit AMG-GT3 MY2016 to current. This is the homologated HLS transaxle and has completed 11000km. When removed from the car was in working order and would suit as a great spare transaxle Comes complete with 184mm AP Racing triple plate clutch assembly, release bearing and gear position potentiometer assembly ready to install. The Transaxle also comes in a road case for transportation and storage. If you require any further information please do not hesitate to contact me.

Blaxland NSW, Australia
6
$5,300 AUD

Hewland Mk 5 gears and dog rings. 9 on shaft 2 second gears , 28 assorted standard , 16 dog rings Selling as a lot !

Gwandalan NSW, Australia
7

Mercedes AMG-GT3 Spare Parts - For Sale We are offering many spare parts for sale to suit Mercedes Benz AMG-GT3 MY16, however many of these parts will also suit the MY20 Evo model. Parts are around 50% of new prices and are available to be shipped promptly. Parts are listed as per the following Categories; • Panels • Wheels • Engine/Driveline • Suspension • Brakes/Steering • Fuel • Interior • ECU/Wiring Looms • Air Jacks/Miscellaneous We have too many parts to list separately so for those w

Blaxland NSW, Australia
2

One of the first BMW mini’s in Victoria when they arrived…I think it was 2004 or around then. When I upgraded to the works kit, I kept the engine head. This head could be used and modified.

Hampton VIC, Australia
2
$1,900 AUD
Was $2,200

Race pack Dash IQ3 Logger great condition, come with water temp module, oil press module, oil temp module, pump pressure module, 1 ch wideband controller. call 0422441646

Minchinbury NSW, Australia
20

2017 Mustang Race Car essentials Regretfully unable to find time to finish a started project. For Sale 2017 Mustang Body – near new, travelled 2000 kms mounted on rolling casters for manoeuvrability. Original body and paint (triple yellow) Brand new roll cage CAMS approved for most disciplines Included with sale: - 1 x VELO seat - 1 x 6 point VELO Race harness - Freshly painted cabin - Doors, front and rear bumper bar - Front Sub frame control arms, Bilstein Coil over race suspension - Rear

Edwardstown SA, Australia
11

2002-2007 Subaru Sti spares and parts including: 1. Two twin-scroll turbos as used in the Spec C Group N cars. Each has had limited use and simply removed as part of a regular maintenance regime. 2. Three genuine Subaru Sti ‘green’ driveshafts - one front and two rear. Kept as spares. Never used in competition. (Front driveshaft now sold) 3. Genuine Brembo 375mm rear discs, with integral handbrake drums. 4. Passenger side door. Original paintwork in excellent condition. Complete with all intern

Turramurra NSW, Australia
3

Light Weight Car Parts Primarily For Lotus 7 Replica All corners - springs - shocks - brakes. Pedal box with master cylinders 4 Alloy Rims 15 x 7 Front hubs, stub axles Upper lower wide body wish bones Close ratio racks - tie rods Steering wheel - dash - radiator Other incidentals ALL NEW NEVER USED Maybe willing to separate a few parts

O'Connor WA, Australia
3

Jeff Johnston's Billet Fabricating BBC Alloy Drag Sump Removal Base

Coffs Harbour NSW, Australia
1

Brand new MSD Promag 20 Generator, Part No. 81392CW with leads to suit. $3600.00 Brand New MSD Points box Part No. 8106 $1200.00

Coffs Harbour NSW, Australia
4

Cartek Power distribution board 16 channel brand new in box

Minchinbury NSW, Australia
9

Have for sale the following new brake pads PFC Shape 7778- 35 compound at 30.44mm thick - 8 sets - $500 p/set ( 6 piston Alcon ) PFC Shape 7797 - 06 compound at 29.44mm thick - 4 sets - $400 p/set ( 6 piston Brembo ) PFC Shape 7797 - 03 compound at 29.44mm thick - 2 sets - $400 p/set ( 6 piston Brembo ) Pagid shape E1619 - RS5 compound at 25mm thick - 3 sets - $425 p/set ( 4 piston Brembo ) Pagid shape E2557 - RS19 compound at 29mm thick - 3 sets - $580 p/set ( 6 piston Alcon ) Pagid shape E26

Altona VIC, Australia
5

Holden 333 stroker , only done less than 10,000kms. Ported heads, mid cam, roller rocker, I beam rods, ARP rod bolts, victor Juiour manifold and extractors to suit LH/ LX torana. Was in my car for Targa event for 1 year .$6300 Great strong engine, 0422441646

Minchinbury NSW, Australia
7

Taiwanese CNC Mill with Syntec controller 3 phase power. 8 station automatic tool carousel - 8000rpm maximum spindle speed - the machine can be operated manually via handwheel Able to do fixed threading no adaptor required - The syntec controller uses standard G code based on Fanuc machine coding - The machine comes with autodesk Fusion 360 post processor, three phase transformer, fully enclosed cabinet, 10 BT30 tool holder plus two BT30 facing tools, numerous Guring carbide tooling. Set of

Ormeau QLD, Australia
1

Coil-over springs From your never to be used spring box, all and any brands you may have a pair of 200lbs or and 225 lbs 300mm free length and 65mm bore diameter. I am in Brisbane, and have a pair of 300lbs and 400lbs that I could exchange or sell

Hillcrest QLD, Australia
3

Transam fibreglass body , brand new never used , comes with front and rear Lexan screens, undertrays , and mounting fixtures , as approved USA ID tags

Auckland, New Zealand