October 2021 Jtr quality build. Frame is fully 2 pak painted before any cladding or flooring is installed. 3500kg GVM, 4 wheel electric brakes, with breakaway system. Battery inside in a battery box with 2 gang light switch, only one in use- wired to the light bar over the back door, the other switch was going to be for led strips I was going to run down each side internally. Quicklash over the tyre tiedown system and 4500lb winch installed. I have a 800*900 shower floor tray, 2*250watt sola
BMW 130i 6cyl 6 Speed Manual CAMS logbook and also AASA Logbook 3E Production Fully Recondition Gearbox Full Head rebuild and Port to 3E Specs Sparco circuit 2 seat on runners Momo Suede quick release steering Wheel New Enduro Harness Full CAMS approved cage Front suspension Shocks MCS Racing – Two-way adjuster for bump and rebound separately. Front springs 800lb Standard BMW Motorsport front sway bar set on softest setting Rear Suspension Shocks MCS Racing – Two-way adjuster for bum
RELUCTANT SALE Enclosed race car trailer. Built 2014. Measurements in pics. We were using it for a XR6 Flacon Race Car. Plenty of room Here is a list what the trailer has: 4 wheel electric brakes; brakeaway system; jockey wheel heavy duty; stand wind down; 2x stabilizing legs, ALKO suspension setup as in pics; ATM 3500kg; TARE 1560kg; LED clearance lights, LED tail lights; exterior lighting; interior LED lights and spot lights; rear spotlight for loadingfull bluetooth stereo system with intern
Sports 2000 Group R Historic sports car
Motorsport Australia log book. Lightly raced. Currently competing Prod Sports 2b. 2 sets rims 17" and 18". Single turbo conversion with " indycar" modified new Garret turbo. Extensive work on underbonnet cooling. Bigger brakes with abs 8 spot and 4 spot. Hand built BC coilovers. Haltech computer, multiple pumps aem smart coils, currently dynoed and tuned to run 98 octane at 17 psi. Has new radiator and twin aftermarket oil coolers. Running fd drivetrain. Easily passes drive by noise tests. Uncut
1990 R32 GTST - RB25 motor (rebuilt 2020) - RB25 gearbox (Done 3 seasons) - MCA RED suspension - GCG GTX3076 turbo (new 2020) - ASR Race baffled sump (Holds 9L) - Head Drain - Genuine Greddy FF plenum - VIPEC ECU (Hi & Low boost switch on dash) - Powertune digital dash(new 2020) - Schroth 6pt Harness (new 2020) - Weld in cage - R34 GTR BREMBO Brakes (DBA floating rotors and Winmax W7 pads) - BM57 brake master cyl - Kazz 1.5 way diff - OS GILKIN Twin Plate Clutch - RAYS Gram lig
Ford Escort Mk1 2dr Race car/Targa car, 80% complete. New 1800 Zetec (ex formula ford race engine), Quad Jenvey injection, S3 LSD with chromoly three bar and adjustable watts link, Bilstein coil overs and king springs (f/r), Custom front end with rear facing compression strut and integrated blade sway bar (ex DJR Sierra). Too many modifications to list. Really needs to be seen to appreciate how much work has gone into it. Brand new build call for more info.
Kawasaki 1200cc Garrett Turbo motor running low boost for Dyno run in, 240 hp at wheels. A spare motor ( carbys) 245 hp. Two sets of wheels and numerous spare parts, to many to list. This car is Motosport Australia Log Booked not raced since motor rebuild, all receipts. The car trailer is insulated 12 V - 240 V double bed storage, TV, annex, disc brakes override , tows great.
Car was purpose built to run into the 7’s as a street driven car, just like all of spot on’s toughest cars. Car still has all body tags for registration! All work has been done by Spot On Performance in Brisbane. Full build gallery can be found here: https://www.facebook.com/media/set/?set=a.1214426645312666&type=3 No expenses spared on this build. Everything is BRAND NEW, NEVER RUN. Complete chromoly chassis 4 link rear with full floater spot on sheet metal 9” housing Billet strange cen
Australian built, all aluminium welded frame, very nice to tow, always stored under cover, 8.10m length form draw bar to back, 2.5m wide, 1950 between inner wheel arches Inside has bench and storage, wired for 240v external power and also 12v internal battery feed to lights, Has winch for pulling car into trailer and lowering the rear door, tare 1850, ATM 3500 Very well maintained in as new condition.
Datsun 1600 Rally Car. Professionally built by ProRace Engineering on the Gold Coast to be the most competitive gravel rally Datsun built in Australia. Sandblasted and modified shell, nothing else Datsun. Comprehensive complied national steel cage. Custom Cromoly suspension, wider track, longer wheelbase. More wheel travel than the competition, multi linked trailing arms, extensive design effort into light weight, serviceability etc. Duratec 2.0L on throttle bodies, Aisin 6speed C/R with short s
2014 BMW 235i with 8-gear smooth auto or paddle shift, races very good on auto, in perfect condition for circuit racing, ready to go, roll cage, suspension, camber, tyres, breaks, adjustable race seat, functioning AC for hot summer race days, etc and fitted/upgraded for best performance
THIS VEHICLE IS AVAILABLE and LOCATED AT: 320 Oxley Ave, Margate, QLD 4019. All viewings and Inspections are very welcome during Business Hours. Genuine Inquiries only please. Please keep in mind this vehicle is a Statutory Write Off due to very minor water ingress, it cannot be registered for road use but would make an excellent track car. This vehicle runs and drives very well. We have done a massive service on it including Oil and flush, Spark Plugs and Air Filters. We welcome Interstat
2006 BMW 130i (E87). Log booked "3E Series Production" race car. BMW Performance 6-piston brake package. Lightweight steel flywheel (DMF-delete). Race clutch. MCA shocks. Drexler LSD. Cat-delete exhaust. Diff and engine oil coolers. Solid engine/trans mounts. Endurance seat and belt. Dry break and fuel cell (cell out of date 03/22). Full over-the-wall dry break refuelling rig included. Pit radio intercom. Car has extensive race history including numerous Bathurst 12hr & 6hr. Eligible for e
Well known log booked Austin Cooper S Nb race car. Farndon crank and rods and Omega 1310cc pistons. Med drop gears and dog engagement gears with mainshaft support. APT cam with Med LDX rockers. Perfect body with all original panels and 2 pack paint recently. Current belt and seat. Performance wheels x 6 x 5.5 "x 10". Salisbury LSD. Alloy full cage. Well presented car which did 09"s at Winton last year. Ready to race. Comes with long track ratio.
Excellent condition , had 2 Pack resto respray 4 years ago , new screen fitted , motor had new timing belts , water pump , idler pulleys , belts , new radiator & hoses etc done about 2000 k”s ago , plugs , leads , factory in bonnet intercooler , braided brake lines , rotors & performance pads , new clutch slave cylinder , has Brown Davis Cams certified half roll cage fitted , Tein adjustable coil overs all round , near new Yokohama semi slicks , front and rear adjustable strut braces
1997 BMW E36 328i coupe - 6 litre Chevy LS2 inspected and refreshed - Mild cam package (112 LSA) - 6 speed manual Tremec TR6060 gearbox - Alloy radiator with Spal fans - Stainless exhaust - Custom made driveshaft - 8 Bolt 3.9:1 limited slip diff re-built in 2016 - Solid M3 axles (not the hollow ones found on certain models) - Genuine BBS wheels - Varex muffler for variable exhaust volume - Coilover suspension - Reinforced rear strut towers (common problem with the E36) - Black leath
This Minetti has been a total rebuild of electrical with all Haltech equipment. This includes IC7 Display Dash, 2500 Elite ECU, 02 Wide Band Sensor, HPI4 Power Ignitor. The engine is a Gen 2 -1340cc Suzuki Hayabusa with 8 injectors and has the low profile sump with a 360 degree swivel pick up. The body is a new 1 piece lightweight version. Other equipment includes, new 6 point harness, MCA fully adjustable shockies, new Avon tyres only 2 meetings old, Dyna jet quick shift for flat up changes, Wi
BMW M3 1994 rally car. Full roll over cage Carbon fibre racing seats Full harnesses NB. Car is registered to drive on public roads with the roll cage and as a two seater. NB Heavily modified suspension and BMW motorsport alloy wheels. Increased engine power - dyno 245HPb at rear wheels. Only 500km of non race track distance converted since a 100% engine rebuild, including new pistons, rings and 100% nut and bolt cylinder head refurbishment. CAMS REGISTERED ***Please note, the registration num
PANTEC - SLEEPER SPEEDO: 692984 DIMENSIONS: L - 8.0M W - 2.5M - H 2.6M 52 CUBIC METERS WITH TAILGATE LIFTING - 2 TONNE. GVM 16000 GCM 28000 NEW RADIATOR. NEW CLUTCH @ 493000 KLMS. SERVICED EVERY 10000 KLMS - RUNNING INTERSTATE 2000 TO 6000 KLMS PER TRIP. WELL MAINTAINED & USED AS A FURNITURE REMOVAL TRUCK. GREAT TRUCK WITH NO POLLUTION CONTROL - NO HEADACHES NEGOTIABLE NOTE: THE TRUCK IS CURRENTLY LOCATED IN GEELONG VICTORIA.