Locally designed and manufactured 8 stack Billet Manifold to suit Ford Coyote Engine. Features a EFI Hardware race tested DBW motor, connects to OEM plugs & works with factory ECU Manifold will be supplied as shown in the photos, ready to be fit to your engine. Package will include all required O'rings, bolts, etc for proper fitment. NOTE: Manifolds are currently being manufactured, due for shipment by Mid-December. Can ship Australia wide or internationally. Shipping with incur an additiona
EX WGR SUPER V8 2001 RACE MOTOR BLOCK BRONZE LIFTER BUSHES NEW JE 4.030 PISTONS,RINGS'PINS,ROLLER LIFTERS,CAM,JESEL CAM BELTS PULLIES,4XBOLT MAIN CAPS,NEW DRYSUMP,FITTINGS,HOSE,PUMP,FLYWHEEL,BALANCER,JESEL ROCKERS,NEW LP MANIFOLD,PUSH RODS HEADS ARE BEAR BUT HAS NEW VALVES ONLYROCKER COVERS,DIZY,WATER PUMP,NEW BIGEND AND MAIN BEARINGS, THIS IS A ALL SUPER V8 PARTS ENGINE. VERY LITTLE PARTS NEEDED TO COMPLETE. ALSO HAVE 2 NASCAR SBC BILLET 350 CRANKS $1,000 EACH AND HOLDEN 308 BILLET
MX-5 NB8C blank canvass! 1.8 lts 6 speed with ABS brakes & locked diff. Full import with only 120k on the clock. 949 Racing wheels 15x8 with Yokohama A050 tyres, perfect car to finish setting up for whatever you want, weekend track car for sprints or get a bit more serious and set it up for 2F or MX-5 cup racing!
Custom built trailer in excellent condition. Total carry mass is 2000kg Total length - 6.6m Width - 2.4m Draw bar to front of trailer - 2.1m Inside of trailer - 4.5m Inside height 1.83m Includes 4 Tonne winch with two remotes. Brakes and master cylinders are new. Includes one Tonne tie down straps with ratchet. The trailer is in excellent condition, first to see will buy. Also includes 12 month Rego to September 2023.
Bmw E46 325i (2002 model) 2.5 litre 6 cylinder Log Booked 3E production car and runs in E class Great car to start racing in. Very well balanced and fun to drive. Adjustable front coil overs and adjustable rear shocks. Larger front sway bar. Kazz 8 plate 1.5 way LSD diff new poly diff mounts, solid gearbox and engine mounts. Has a freshened up engine with new bearings, ARP rod bolts, news rings, reconditioned top end with Racetech valves/heavy duty springs/retainers, new lifters, timing chain an
New build for track attack QLD new engine new paint welded in cage ready to race xyz coil overs
Midget engine freshly rebuilt and has dyno work only. Ford SC1 cylinder head on a Fontana bottom end. When engine was pulled apart for rebuild we saw where improvements could be made, with piston design and a few other little things, this design change resulted in 15 more rear wheel horse power - with more to find if you want to fine tune ignition curves, I was only after numbers to show it is not a lemon. Happy to share these results with an interested buyer. - This price is for the engine co
Nissan 180SX 1991 SR 20 DET 5 speed, turn key track car with roll cage, mod plate and VIN. This car has done a 60.44 on the QR Sprint track, a 63.45 on the QR Clubman and a 62.54 at Lakeside with me at the wheel. The body has a few cracks in the paintwork but the engine and drive line are in great condition. New coilovers were installed in April 2022 and the car has been serviced by STZ Automotives after every second track day. The car has a large race seat fitted for the bigger driver. I am s
Professional built NC 2000 cc , Cams logbook 2F , Full roll cage , Haltech ECU , Gary Stewart race engine , Tein coil overs (adjustable) , ABS brakes , 3 sets of wheels , Hard top , Sparco race seat , Body in good condition, few race damages on bumper bars , did 58.7 Lakeside , Good overall condition To contact send SMS I will call back Michael 0409785242
Replacement value with accessories over $25k Absolutely incredible trailer. Used to two my Mclaren street car which is 1980mm wide. The 2200mm wide deck provides stress-free loading and unloading by one person. I can load/unload my car in a few minutes and tie down and be driving away in 10-15. The low deck level and independent suspension gives an amazing ride and is unbelievably stable. Great for long trips as they do not move the towing vehicle around. I've towed with both a Ford Ranger and
This 72 Camaro is a car I started to build for Australian Tans Am class. It is a project that still needs lots of work but has been caged had the floor modified to suit the correct gearbox and to suit where the muffler will sit. It has also had the pedal box master cylinders installed. The only thing missing is the 2 front guards. The car will also come with 2 brand new full quarter panels, a fiberglass bonnet, new race seat, pedal box, race fuel tank and brand new limited slip differential
Holden VY 2004 Race Ute / Track Car Built for Production Ute Racing QLD. Great category and great crew but work and finance has pulled the handbrake on me. Full service including oil, filter, plugs, gearbox, diff, fuel pump, fuel filter Freshly built diff 3.73 mini-spool (Hart Transmission July ‘22) New clutch (Peters Motorsport - March ‘22) Ceramic coated headers (March ‘22) and mostly straight through (small resonator midway) VE V8 SS calipers all round. New pads. Fresh fluid/bleed. MACE
Renault RS275 2015 Renault Megan RS 275 built for track days time attack .Car is for track use only built from a very low 28000 klm car in excellent mechanical and cosmetic condition.Built with all new part .BC coil overs/ 6 point weld in roll cage/ pair is Sparco pro200 seats /Rpm belts /Quick. Change gear shifter/ 18 inch wheels with new federal semi slicks .Car is complete and ready to go has not been raced since completion.selling for less than build cost $15000 lost interest
I Hyundai Getz09 Racecar HHC 1.6 3 door hatch Motorsport Australia Log Book 6 point national spec 3E roll cage (Scott Rods) Exhaust done by (Scott Rods) New DGR coil overs Eparco sprint L seat Velo harness 6 15 inch mags Nankang NS2R used tyres New HC battery Braided clutch and brake lines drilled front rotors and extra pads Rear brake bias fitted from master cylinder Window net rain light oil catch can dash camera quick release steering wheel hub Car is build very well to race now ready
CAMMED LS3 Aussie LS Performance just completed inspection, refresh of seals and cam upgrade. No longer going into project. Low KM LS3 VCM710 cam 232/234 0.590/0.596 110LSA Pac 1219 springs Melling Cam retainer Plate Crow trunion kit New Genuine Gen4 Head bolts New Genuine GM Ls7 lifters and lifter trays New Cloyes timing set New Genuine GM LS9 head gaskets New water pump Power Band Harmonic Balancer New Genuine GM Balancer Bolt LS3 intake and Throttle Body $12 000 Pickup Clontarf
PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l
VY Commodore Drag Ute. Drop an engine setup, ecu and converter in and go racing. Has Coan built T400, Harrop full spool 1000hp rear end, 3" 2 piece chromoly tailshaft, 7 point chromoly cage, chromoly front end, chromoly v6 k frame (can buy LS mounts to suit), wilwood booster delete master cylinder, full fire suppression system, drag bags in the rear, custom built light mags 4" fronts 10" rears, light weight brake rotors and callipers, fibreglass bonnet and doors, perspex front and rear windscree
BMW 328i sedan. 4 doors Automatic 4 airbags 5 speed gearbox 230,000kms. Excellent considering. Drives beautifully, smoothly and quietly.
RCE Performance Warehouse are offering a great opportunity to the right applicant a position to join our sales team!! www.rceperformance.com.au Hours for job position M-F 8am to 5pm. Stable business that has been established with current owner for over 20 years. Remuneration based on abilities. Email resume to firstname.lastname@example.org Please put the word "resume" in the subject line. #rceperformance #rcejob #performancepartsposition #willowbankraceway
SOLD FOR SALE - 20/21 Nevco Hydraulic lowering trailer 12/2020 built specially for me by George at Nevco to carry a Porsche 911. Balances perfectly hydraulic operations for lowering and raising Tow’s beautifully. Air track system. Infinite tie down positioning. 5.5 m deck Box storage, Battery, Winch, XO 750 kilo dolly wheel, Anderson plug. D035 hitch. Big electric brakes. Latest dampening system. LED deck lights and storage lights. Full electronics. Stone Guard. Powder coated