SSR Enabled

187 items in Victoria for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
23
Registered
Roll Cage

Summary • Would suit track day car, hillclimbs, Targa, Group N Race Series (NA conversion), MSCA events, 2.0l Sports Sedans, or with some revisions could be made into a fast ‘hills’ car • Australian delivered car which has spent most of its life in WA • Commissioned by the last owner over the last 3 years and reached completion 2021 • Professionally built by Peter Clark - specialist race car builder • Final touches put on the car by the current owner and it has completed a track day shake down a

Glen Iris VIC, Australia
9
Registered
Roll Cage
Log Book

Engine 2 Litre Forged pistons Nitrie crank Epoxied galleries Baffelled sump Big match ported head 76 degree cam Larger valves & springs External oil cooler Datrally manifold Twin 48 webers Electronic ign Full engine balance External alloy oil catch reservoir Thermo fan Dyno Tuned 130 Amp Alternator Extractors & 2.5" exhaust Holley red fuel pump Pressure reg & guage Fuel filters & new fuel line Lightened flywheel [machined] New extreem clutch Albins close ratio box over drive

Ballarat VIC, Australia
5

MY: 2011 Mileage: 13,095kms The car has been maintained by the most successful Porsche Super Cup Team in Europe and has been used by a very prominent client in the GT3 Cup Challange Middle East, Season - 13. Engine revised. Gearbox fresh rebuild. The car is also equipped with Pneumatic Shifter from Holinger. The original Porsche gear shift stick also comes with the car as well as a significant number of spare parts (see below). The car will be available in Melbourne from the beginning of July

Bentleigh East VIC, Australia
9

Have for sale the following new brake pads PFC Shape 7778- 35 compound at 30.44mm thick - 8 sets - $500 p/set ( 6 piston Alcon ) PFC Shape 7797 - 06 compound at 29.44mm thick - 4 sets - $400 p/set ( 6 piston Brembo ) PFC Shape 7797 - 03 compound at 29.44mm thick - 2 sets - $400 p/set ( 6 piston Brembo ) Pagid shape E1619 - RS5 compound at 25mm thick - 3 sets - $425 p/set ( 4 piston Brembo ) Pagid shape E2557 - RS19 compound at 29mm thick - 3 sets - $580 p/set ( 6 piston Alcon ) Pagid shape E26

Altona VIC, Australia
10
Roll Cage

Race prepared ute, brand new T5 box, braided brake lines, territory size brakes, DBA rotors, bendix ultimate pads, pedders extreme XA coilovers and shocks, reset rear springs, fresh paint inside and out, standard NA motor, race cage , cube short shifter, hard top lid. plus more to pass race scrutiny. 4 Spare R-spec Nangkang tyres near new. Car was built for Winton sprints and sedan events , tested 30 laps since built as a shake down only. Selling due to moving to new category. $15,000 ON

Wodonga VIC, Australia
16
Roll Cage
Log Book

WAS ORIGINAL PACK LEADER PROMOTIONAL CAR DISPLAYED AROUND THE COUNTRY,WAS A COPY OF THE ALAN JONES CARS OF THE TIME BUT NEVER FITTED WITH SUPERCAR RUNNING GEAR ONLY LOOKALIKE 302 WINDSOR RUNNING GEAR AND CHANGED INTO SPORTS SEDAN RACE CAR. BONNET AND ROOF HAVE DAMAGE AS BONNET FLEW UP IN LAST RACE COMPETED IN. NOW RUNNING AUSCAR SPEC 302 WINDSOR WITH LARGER CAMSHAFT DART HEADS ETC MISSING CARBY ETC AS PER PHOTOS 4 SPEED SINGLE RAIL GEARBOX. 3.45 FULL FLOATING 28 SPLINE BORG WARNER DIFF WITH SPOO

Carrum Downs VIC, Australia
7
$50,000 AUD
Roll Cage
Log Book

1999 WRX Car has competed in less than 10 rallies •Modena 6 speed dog box with group N ratios •Modena front diff •Rebuilt STI plated rear R180 Diff •DCCD centre diff modified with a locking plate to be locked 50/50 split •MapDCCD controller (isn't used with locking plate) •Mca Gold shocks •Current national spec roll cage built by Bond Roll Bars, registered with MA •MA log book •The engine was built by MSR engineering with reliability in mind, has forged internals, RCM group A cams, larger

Bendigo VIC, Australia
38
Roll Cage

Here is a fantastic and special opportunity to secure a very rare, factory built Cayman GT4 Clubsport. A turn key race car that is eligible for entry in club track days, perfect to start gentleman racing. The car is fitted with a Recaro driver seat, factory air jack system, air conditioning, and also features an advanced spring and damper system from Manthey Racing. The car comes on transport tires with 2 additional set of slicks on rims, which one is set of slicks is brand new. *Please no

Bentleigh East VIC, Australia
18
$36,000 AUD

Major upgrades include, uprev tune 5 stage by rev zone, 230kw @ 6764rpm (315kw at fly wheel) coil overs with eibach linear springs - 9.5kg rear / 11kg front. Cusco RS 1.5 weigh LSD Z1. Motor sport dif cooling cover AP racing 6 pot front brake kit with endless ME20 pads. Akebono 2 piece rear rotors with endless ME20 pads. Stillen front splitter Stillen front canards. Z speed aluminium under shroud. Rev Zone custom front alloy under tray. Evo R rear wing, Stillen gen 3 long range intakes, Stillen

Thomastown VIC, Australia
10

1979 Chevrolet Corvette Drag Car. Rebuilt 350 Chev, auto, 4BB Rochester Carby, brake line locker , radiator overflow reservoir, Mickey Thompson Drag Tyres on rear, racing harness, new custom paint. Starts and runs well.

Brunswick East VIC, Australia
15
Log Book

1999 -07 Spectrum. Excellent condition and ready to race. Motor just recently tuned by Indy Automotive and car recently overhauled by Sonic Motorsports. Brand new tires, new seat belts, and Motec dash. There is a huge amount of spares including, front nose cones x 2, side panels x 2, radiators x 2, a full set of gears, stands, and much more...basically everything you need including an enclosed trailer. Price $25,000 with Trailer and spares or $20,000 as roller

Moorabbin VIC, Australia
2

Near new lightweight Tilta trailer. Purchased brand new at the start of the year and only used a handful of times. Has approach angle of just 10 degrees when lowered (it's on air bags). Weighs only 500kg and can tow 2t. Winch (never used), spare tyre etc. Tows amazing! Only selling as I need something wider for my time attack car (widebody) Located in Sunshine West, VIC. Price is inc GST. From TiltaTrailers website: Features & Specifications Will carry vehicles up to 2000kg Trailer w

Sunshine West VIC, Australia
3

Beaver Tail Trailer. Very good condition. Tyre wear .5mm. Lockable tyre rack and stone guard.Brakes reconditioned, complete new backing plates, brake shoes wheel cylinders and master cylinder.New wheel bearings. 12 volt winch,stainless cable. Registered to 1/05/2023. Length 4.3 metres x 2.0 metres wide, overall 5.9 metres.

Yea VIC, Australia
9

Full set of Intercomp scales. Rare to find a good second hand set. Just been checked for accuracy with official weights.

Braeside VIC, Australia
6
Roll Cage
Log Book

PENDING - DEPOSIT TAKEN Camaro bodied aussie racing car, the car is in an as raced condition, there is cosmetic damage to the body that will require repairs, the chassis and engine are mechanically sound. water cooled 1300cc Yamaha engine, current spec AP brakes, electronic dash. comes with spare camaro front clip. price is firm as this is a steal for a current shape ARC, the price of body repairs in taken into account with the sale price.

Briagolong VIC, Australia
9
Registered
Roll Cage
Log Book

This is very good replica of the Fury/ Sufferns Southern Cross works Stanza, where Stanzas finished 1-2-3 (Fury/Dunkerton/Aaltonen). In great condition for a 43 year old car, this car has an L20 engine with twin 45 mm Webers, cam, and extractors. Good power and torque for an L20 (built by Nissco). Engine is only 6 rallies old. It has a Kaaz LSD. Bilsteins at the front. Comes with a set of Super Oscar HIDs. The main headlights are also (very bright) LEDs. It is wired for Rallysafe, and has a Pelt

Bellbrae VIC, Australia
10
$110,000 AUD
Roll Cage
Log Book

400ci SBC on nitrous Built by WESTEND PERFORMANCE Dart block, lunati signature series blower crank, Callie’s ultra rods, je pistons, custom ls firing order cam for nitrous, fire rings AFR heads, Edelbrock super Victor manifold, Pro Systems nitrous pro-IV dominator carby Made 1080hp on engine Dyno. Will make more Powerglide, SDE torque converter, 9” fabricated housing by SCF race cars, strange alloy centre 31x10.5w slicks, wheelie bars 16v XS Power battery & charger Racepak v300, racepak

Mildura VIC, Australia
13
Registered

2002 Aussie Racing Car. AU Falcon Body. Running 2010 XJR1300 Aircooled motor. Comes with CAMS logbook. Well set up car. Raced in Miniature Racing Cars until end 2019. Come with spare set of wheels and tyres, a spare motor, front splitters, Bathurst Aero kit, spare headers and exhaust, muffler, rear undertray, starter motors, alternators, new brake pads, engine lifting jig, enough carby parts to make up a set of carbs and anything else I have laying around to suit the car.

Leopold VIC, Australia
6

Cobra Imola Pro-Fit Brought for a passenger seat but too slim to fit everyone. Out of date for FIA events but still usable for club events etc. Very clean fabric, had hardly any use from previous owner and none from myself. Back and side gelcoat in great condition. Also have a Cobra Suzuka Pro-Fit I may possibly sell as well as a pair of someone is interested in both (last 2 photos are of Suzuka seat, scratched sides from mounting in car, FIA date expired 2019) $900 for both, or $450 for Im

Werribee VIC, Australia
10
Log Book

Woodgate Evo 2 Superkart 125 Gearbox. Extremly fast ready to race package. Comes with everything you need to go racing Superkarts. TM10 125 Gearbox engine is one race meeting old since last rebuild. Comes with the latest AIM Mychron 5 GPS data logger. Ultra light bodywork with carbon kevlar diffuser floor and seat. Wheeled workshop trolly/stand. Feel free to give me a call if you have any questions.

Warrandyte VIC, Australia