SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

77 items between $20,000 & $25,000 for sale

Refine Search

Clear All
Keyword
Price
$20,000
$25,000
Listing Type

Featured ads

All Results

2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
7
Was $28,000$25,000
Upgraded to Subaru reason for sale. Great first time car has all the bits and fun car to drive has rally rego and motorsport Australia logbook and cage and is ready to rally. Emtron Digital Dash and Emtron ECU Mapped for E85 so the engine runs cooler for maximum power have all dyno charts. Motorsport wiring Harness Push button start 4 spots lighting pod LED Wiring for rally safe 2 Fire extinguishers and fire bomb Quick release Sparco steering wheel Twin roof vents 4 point Sparco Harness Sparco

Croydon Park NSW, Australia
Share
Watch
9
Experience the ultimate in heavy-duty hauling with our robust beaver tail trailer! This 8x2.45m powerhouse is engineered to handle loads up to 4.5t, making it ideal for transporting freight, cars, machinery, and more. With a sturdy build and design, crafted with reliability in mind, you can trust this trailer to tackle any job with ease. Plus, for those seeking even greater capacity, the option to upgrade to air brakes opens up possibilities beyond the 4.5t limit. Built in April/May 2023, this t

North Lakes QLD, Australia
Share
Watch
10
Roll Cage
Nissan 180sx Time Attack/Sprint/Hill Climb/Drift Car Car was serviced with new oils and filters recently in preparation for 2024 events. Car has previosly done the following lap times Queensland Raceway: National 1:19.44 Switchback 1:12.29 Sprint 56.20 Clubman 58.93 Sportsman 56.61 Lakeside: 58.5 Morgan Park: E layout 1:07.93 K Layout 1:23.5 Noosa Hill climb 61.84 Very fast car for the money and performs well. Would have to spend 3-4 times the price to go as quick with a modern car and up

Eastern Heights QLD, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
11
This is a great looking car that gets attention everywhere it goes. This car is set up for hillclimb and lapdash event, not Legend Racing. but could be returned quite easy if wanted to competed in a Tri-Series competition lapdash at Tamworth (21 - 22 May 2022). It has been modified beyond Legend racing specs. Obviously it has wings front and rea, it also has a full floor pan with skirts. Running soft slicks with little wear and plenty of runs left in them. Has a second set of rims with wets tha

Bungalow QLD, Australia
Share
Watch
7
Registered
Log Book
1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

Mudgee NSW, Australia
Share
Watch
10
Roll Cage
Log Book
Mid Mount 13B Turbo, recently refreshed, LC10 Micro Tech, Rochester Injectors, E85, doweled, tuned for torque, 400RWHP, motor built to run higher HP depending on turbo, modified series 6 gearbox, torsion differential, many aero combinations including ground effect, can be run as sports sedan, hill climb or sprints, weight 780kg. Has been run by current owner since 1992 but has been subject to continuous upgrade. Sale due to medical reasons.

Kurrajong NSW, Australia
Share
Watch
9
Roll Cage
Log Book
FOR SALE (complete Roller) CHEVY LUV STREET/DRAG CAR $28k or $22,500 less wheels Car currently runs 8.41 @159 Set up for bbc and glide (will come with pipes / tail shaft to suit) Would suit other combos comfortably Painted in House of Kolor Current IHRA tech 9” 35 Spline / ladder bar Disc brake front rear Coil overs front and rear Wheelie bars / Parachute / Wing etc Everything will be there less the engine and gear box Beadlock rears / 17” RC fronts car All windows are glass (front wind

Seven Hills NSW, Australia
Share
Watch
7
Element enclosed trailer November 2022 built Internal measurements 4100 long 2250 wide 1950 high 1600 between guards Rear door opening 1900 high 1700 wide Bluetooth 4 wheel electric brakes Boyd coddington billet wheels Lined on the inside walls with aluminium composite panel 12v lights Anderson plug to charge the battery. Would make an ideal go kart, motorbike trailer. set it up as you want it. Sold without the racking. Only selling to upgrade to something a little bigger. L

Hamilton VIC, Australia
Share
Watch
21
Approx measurements: 7m long. 2.3m wide. Rear door opening: 1.865m. Front accommodation height: 1.6m and length 2.440. Rear load area: 4.8m. Overall height 1.7m Built for a medium size race car Electric Brakes Gooseneck hook up Brake a way brake system Electric drop tailgate/ ramp Full accommodation at front (lounge/ sleeping area) carpeted Installed 12 volt & 240 volt lights Kitchenette area Water / fridge / storage etc. Television/ Radio / Air Conditioner / Heater & Solar Panel ( n

Brookvale NSW, Australia
Share
Watch
4
316 i compact bmw running a rover v8 recon gearbox rebuilt motor only done club events due to time and health isues log booked as a 3d sports sedan great car for club or race events comes with some spairs this is a cheep car to run and lots of fun

Upper Coomera QLD, Australia
Share
Watch
6
AUTHORISED FUTURA DEALER Futura Trailers designed to be effortless!! The Super Sport Trailer caters to all vehicles and is designed to safely load and unload with a press of a button even the lowest of low vehicles out there. Brand New Lowering Trailer Remote Control lowering and raising Deck Length - 5m Deck Width - 2m GVWR - 2500kgs Load Capacity - 1900kgs Tare Weight - 600kgs Deck Angle - 3 Degrees Lightweight Aluminum frame Accessories available 3 other models available; TD400 - 4m Til

Port Melbourne VIC 3207, Australia
Share
Watch
16
Roll Cage
Log Book
1999 gc8 wrx rally car Ej 207 5speed 4.4 diffs Xyz rally suspension Sti brakes Hydro handbrake Seats and Harnesses Monit Terra phone inertcom MA logbook Light pod fitted with hids Mirco tech ecu Turn key car ready for next season 25k car only or 27k with 10 new wheels and tyres and spare 5 speed gear box

Kyneton VIC, Australia
Share
Watch
5
Roll Cage
Log Book
Race winning Hyundai Excel for sale. Car has been competitive across the country. Car had an overhaul in 2023 and has since been repainted new panels for sale. The car was raced by Max Geoghegan in 2022/2023 and driven by Treigh Maschotta in 2021/22. The car has won multiple races, comes log booked and has gearbox and motor sealed with seal sheets. Welded cage. New Mychron 5. Donor car and other spares and parts are available such as hubs, panels etc... Car will be sold as per new condition se

Lilyfield NSW, Australia
Share
Watch
11 1
It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par

Hawthorne QLD, Australia
Share
Watch
1
Holden 355 Engine - 4 Bolt Main conversion - Mains ARP stud kit - Scat Forged Holden 355 Crankshaft - Scat H beam rods - ARP rod bolt set - Moroso weld up sump kit, 7.5 litres oil - Probe Industries Forged Pistons .030 thou - Floating piston pins - File cut rings - Mechanical roller Camshaft .750 thou lift - Roller lifters - Manley Extreme duty Valves, 2.080 intake, 1.600 exht - Double Valve springs, Retainers, 10 degree locks - Holden EFI Cylinder heads, Extensive port work - Harrop Single pla

Shepparton VIC, Australia
Share
Watch
5
Registered
Recently completed Perth to Sydney Marathon and local Historic and Classic Rally Club events. Showing genuine 178K km currently on NSW Conditional logbook. Thousands spent. Engine shimmed with 850 camshaft, fuel injection, new radiator. Aluminium engine bash plate. New competition exhaust. All new springs, shocks and top mounts, new brake rotors back and front, Kumho rally tyres on steel rims and AT tyres on Virgo rims. New A/C compressor. Factory bullbar and Hella Comet 500s. Rear seat and boo

Turramurra NSW, Australia
Share
Watch
11
Price reduction Brand new No ramps required air bag car trailer Sits 20mm off the ground 2.5 tone carrying capacity 4 wheel electric brakes LED clearance and rear lights LED Reverse spot lights LED Working lights 20 litre stainless steel air tank with tyre inflation fittings Remote control and manual inflate and deflate Remote and wired winch Battery and battery box with isolator Dc/dc inverter with Anderson plug to charge battery Break away switch Wheel chocks Spare air bag and fittings Air

Clyde North VIC, Australia
Share
Watch
7
Roll Cage
Log Book
2022 Build • Control Supashocks (with camber washers) • ACT Autoworx Engine, Exhaust and Airbox • Misch’s aluminium radiator • Custom solid engine mounts • Oil cooler • Fuel pressure regulator • Recent spec AGI bolt-in cage • Custom air intake • Short shifter • Refurbished steering rack • Whiteline rear sway bar • Brake bias kit • Performance 15x7 rims with near new federals. Will come with Dunlops as well. • RPM seat with head restraint • Driver floor plate • Blower fan • Resprayed inside

Mittagong NSW, Australia
Share
Watch