122 items between $30,000 & $50,000 for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
Roll CageLog Book
Selling new RX8 Bathurst 6 hr car, raced Bathurst 6 hr event. Built to the Production regulations for the Bathurst event. New AP brakes. Every component new and serviced. Spare package with spare new engine and gear box and wheels available. Over head Fuel rig with new hoses available. Perfect car to race reliably and cheaply in any 3E Production race or the Bathurst event.
6
Registered
MY06 Sti (Terry) 293kw @ 24psi High boost E85 274kw @ 20psi Low boost E85 Link ECU, Deatschwerks 1300cc injectors, Engine Rebuilt at 93,920km now 103,000 New short block, Bored and honed to +10. Manely piston, rings and pins. Nitto I beam, Nitrated crank. Race bearings (Con Rod and Mains). 11mm APR Studs. Cosworth baffle plate. Twin plate clutch APS Turbo Sr57, APS intercooler and blow off valve. Spec C Intercooler sprayer bottle Cermic coated headers Custom fuel surge system PWR radiator TS
10
RegisteredRoll CageLog Book
Group S log booked race car. Ready to race. Competitive setup that’s a lot of fun. Dave Headley race head and manifold. Straight cut close ratio overdrive gearbox. 4.1:1 limited slip diff 6 wheels and tyres Electronic ignition and graphed distributor. Uprated, lowered race setup suspension Rowntree automotive bottom end with H-beam rods and lightened crank Alloy flywheel Baffled sump Dual fuel pumps Alloy radiator Electric fan It’s registered for the road as a modified vehicle so it’s also
6
Roll CageLog Book
Rover P6B with chrome moly roll cage. Painted in Shell racing teams colours. This car is essentially rebuilt from the Camel/Shell Rover as constructed in 1972 at Manton Motors in Melbourne. The original car was modified extensively over the years to the extent that too much metal was removed from the structure, therefore it was necessary to donor A, B and C pillars and base unit but retaining all of the original light-weight panels, F5000 front suspension, framework in engine bay to hold the mot
6
$35,000 as a roller OR $50,000 as a complete car 1/2 CHASSI CAR series 6 bridge port turbo Air shifted liberty Floating 9" 4 link rear Koni's plenty Shocks and sway bar Runs easy low 8's plenty more in combo MW Ignition Data Logger new parachute new front tyres new rear slicks new harness Andra and IHRA TECH INSPECTED
9
- 5th Wheeler Trailer, 4.5 Tonne GVM, Tare Weight 1.8 Tonne - Approximate 10 metre floor length, with an additional elevated 1.5 metre floor length in goose neck for equipment and spares storage - 2 * Reverse Cycle Air Condition units - 240V power or 8 KVA generator - Refurbished 3 * Axles, 50mm Tube - Electric Brakes on all 3 axles - Awning for side of trailer, which suspends on passenger side, almost full length of floor - Recently painted outside - White - New outside lights - Internal winc
5
Roll CageLog Book
Toyota 86 3E Production Car Very successful car in class D of the NSW Production Car Championship, as well as 2x Class champion at the Bathurst 6 Hour. - Bond 6 point national level weld in cage - Sparco Circuit II seat (not pictured) - Scroth 6 point harness (not pictured) - Motec C125 dash - Carbon fibre door trims - Heated windscreen - MCA Red coilovers - Team dynamic alloy racing wheels - Adjustable front strut top hats - Oil cooler - Koyorad extra large radiator - Billet alloy diff hat with
7
Roll CageLog Book
2006 Subaru WRX Rally Car. The following additions have all been installed brand new and only used for 1 rally: - Coil over suspension with canisters - Rally Safe Compatible - Monit Trip Meter with foot pedal - TerraTrip Head Sets - Gold Speedline Corse Wheels - Rally Tyres - Carbon Fibre Air Vent - New Radiator Overall: - Sparco Sprint Seats (passenger seat brand new, used for 1 rally) - Sparco 6 Point Harnesses (passenger side brand new, used for 1 rally) - CAMS approved roll cage - CAMS and A
7
Roll Cage
Conroy Motorsports KIA Proceed G T 1600 Turbo 3 E Production Car. Price is $35k. The Car comes ready for the 2022 Bathurst 6 Hour with upgraded Anti Spill Dry Break System-- FIA Cage-- DBA 5000 320x28 Rotors with P B 4 Piston Calipers.--Conroy Motorsport developed Suspension with King Springs-- 12 Speedy 17" Carbine Alloy Wheels--6 Speed Gearbox with LSD-- Velo Seat. Spares-- 1 Complete Race Engine plus 2 Standard Engines--1 Gearbox-- 1 Turbo-- Pair Driveshafts-- 1 Radiator--1 Inlet Manifold--
5
Roll Cage
We changed the engine to a 968 then did the following works by a professional engine builder: 1. MID Darton Sleeves 2. JE Pistons 3. Dry Sump 4. Lightened rotating assembly 5. Carillo Rods 6. Race ported Heads 7. Race Cam & Custom Intake Manifold 8. 2 x Sparco Race seats 9. Hossier slick Race Tires 10. 1.7 kw Brosch Starter Motor
7
Registered
LHD ex American race car 4.5 V8 5/Speed fully recoed transaxle with LSD , new fuel pumps ,fuel distrlbutor and warm up sensor Fuch wheels ,new tyres race clutch ceramic brakes Sparco seats and belts 1/2 roll cage ,quick release steering wheel. On Club Plates $35000.
12
Brand new Callie’s billet crankshaft, brand new light weight 6” carrillo rods Honda pin 827 wrist pin brand new set (10) mahle high comp pistons brand new cam and lifters near new shaut cylinder heads complete with titanium valves and jesel rockers billet valve covers complete mechanical injection set up and a brand new world industries block 4 bolt mains 350 mains 4.125 bore, cam tunnel machined for 55mm bearing and mains line honed. Will separate
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.
6
Open to reasonable offers 1960 morris minor panel van - Full custom setup including chassis, cage, steering, suspension. Set up for Drag racing - Brand new 2 speed powerglide - Brand new Hypertune intake and exhaust manifold - New rims and tyres - Brand new Stealth B&M Shifter Way too much to list Engine is a SR20 which has been Darton Sleeved, All machine work carried out, new rods and pistons, Car runs Mechanical fuel pump and dry sump in which is all new. This car has been professionall
28
Lockdown project. BRAND NEW READY TO GO .7.3 MTRS INTERNAL 2mtrs high inside 1980 between guards .one piece roof .painted trim mag wheels white in COLOUR. 240v power.and led lights .ie down point’s bench rear winch on rear door .3200 kg axles 4t springs .alko brakes .spare wheel 150mm x 50 x 4mm drawbar .h/duty safety chains etc. STRUCTURAL ENGINEERED LASTEST DESIGN, Aluminium floor Brand new steel frame, new steel floor, fully painted underneath and internally. New suspension, 2 axles, springs
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers
12
Pontiac Grand Prix GTA. This car has been built as a road course car & is the only GTA with a purposed built equilateral chassis in Australia .The car has a brand new LS2 fuel injected engine. Hightower gearbox. Winters quick change differential. Brembo 4 Spot front & 4 spot rear brakes. Penske coil over shocks. Dry sumped motor. New set of Slicks & wets. This car does 104’s at Wakefield. With over $4,000 worth of new spare parts
40
Roll Cage
Predator V8 4X4 Buggy Flat Pack Kits Build your own V8 AWD Buggy CNC Cut and Bent Tubular Chassis Tubes and Sheet Metal Ultra Narrow Differentials with Internal CV Joints Ultra Narrow Hubs with Internal CV Joints 30 Inches Wheel Travel - Front and Back A Arm IFS and IRS 4X4 Suits LS V8 Engine + Holinger RD6 6 Speed Sequential Transmission Tire Inflation and Deflation 37" Race Tyres 3" Internal Bypass Coil Overs Quick Change Transfer Case Mid Mounted Engine CDS (DOM) or 4130 Tubing Rolling Cha
5
• 4age blacktop blueprinted and balanced only engine dyno time • Supertech valve springs with titanium retainers • Lightweight balanced flywheel with arp bolts • Quaife type 9 dog box • Motec M4 Pro all options enabled • Hurst pistol grip shifter with flat shift/ignition cut • Ishift shift light • VDO guages • Soft side tonneau’s have been replaced with fibreglass clip on covers. • Bosch 044 pump with a swirl pot and lift pump aero flow -6 braided hose throughout car • Cams log eligible for p
16
For sale, new RX8 Cup race cars. ready to race in the RX8 Cup Series. very cheap way to race in a one make series with RX8 rotary cars. All built with new race parts ready to hit the track in a fast growing National series and CAMS state championship. cars are all the same spec.Fresh running gear. 2 cars to choose from, silver or yellow.