51 items under $10,000 for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
8
2024 Jakoma Trailers car trailer located in Port Kennedy Measurements: 5m total trailer length 2.02m deck width between guards Specs: 2 ton rated trailer 1300kg payload Full galvanized frame Heavy duty Alko jockey wheel Mechanical override brakes 8 tie down points LED light system Ramps included 5x 14x185 tyres on Sunraysia rims Ready for licencing 12 month structural warranty
2
I am looking for a new home in Perth, for our 4WD roller Dyno. I’m hoping to find a race team or workshop who was considering a dyno and have room for it to be set up (approx 8 x 5 mtrs) I will supply the dyno plus all the supporting equipment in exchange for some realestate to set it up under a shared custody arrangement. I am NOT interested in selling it even though this is a for sale ad. I am interested in connecting with people looking at buying or leasing a dyno to discuss this very rare o
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900
7
This trailer was built for a lightweight clubman kitcar and was used to carry the kitcar from Perth to Sydney and back. Suitable for a lightweight racecar under 900kg in weight or perhaps dirt bikes or an off road vehicle. Could also be repurposed as a camping trailer or even a food truck. It is fully road registered and way below its replacement cost. It has 3x alloy wheels and high quality Trojan Duratorque independent suspension. Currently has wood composite panels on the sides. Tare weight =
3
Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.
7
Registered
Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl
10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.
1
Tr7/8 steel bonnet with steel air vents Immaculate condition
5
Only 1,527 Race kms since new. Sealed by Bates Motorsport to run in either TGRA 86 Series or TGRA Scholarship Series. Standard flywheel and starter motor supplied with engine. Will require series mandated lightened flywheel to run in the series. Supplied ex Adelaide.
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
3
Roll CageLog Book
1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.
8
Multipurpose built trailer to take a full-sized Formula Vee racecar, with an extra set of tyres and every spare, tool box and kit bag you will need. Has been used for all sorts of other reasons - house moves, karts, bikes etc Additional box on the front for those extra, extras. Box measures 1500 W, 600 D, 500 H. Fully road registered and compliant in WA, with rego to 17 Jun 24, then $86 pa. Fully enclosed and weather proof, to allow a safe storage space on your driveway, as well as a dry race
32
Roll Cage
Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) brakes - need plumbing and finishing off turbo - either new or recon original (not
10
Great setup for getting started in karting. Fully enclosed, purpose built go kart trailer and 2019 senior Ricciardo Kart with Torini 4 stroke engine. Ready to go racing in the 4SS class with the clubmaxx engine. The 4 stoke has very little maintenance requirements and is the best way to get started. All spares included and current tyres only used for one practise session. Trailer has plenty of room and tows great at 110. Has extended drawbar for greater manoeuvrability and side doors for e
5
Suitable for racing car or small sports car, lightweight alloy body, steel chassis with wooden floor. Lockable doors on front storage space. Alloy wheels with spare, Toyo 195R14 8 ply tyres. Rewired with LED lights plus running lights. Electric brakes with spares. Internal dimensions 4.0 metres long plus 0.75 metres front storage, 1.7 metres wide, height 1.1 metres. Long ramps lockable tailgate.. Tows beautifully.
5
Roll CageLog Book
M-Sport Fiesta R2T19, Full Spec Gravel car, Only 930 Stage Km, Excellent Condition, Can be upgraded to Rallye 4, 16 Gravel Rims, 6 Tarmac Rims, Comprehensive Spares package. Ready for 2024 season Gearbox - 130km - Latest Ratios Drive shafts - 130km Contact for detailed mileage and spares list