208 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
1
FOR SALE COMPLETE DRIVE TRAIN 2022 BRZ/GR86 FA24 ENGINE, GEARBOX, TAILSHAFT, DIFF & DRIVESHAFTS. FROM 4400km ROAD CAR! Do not waste my time wanting to ask more about it. It is as stated. More photos to follow.
10
Designed for the Driver, NOT LIKE ANY OTHER FLOOR MOUNT PEDALS. This Patented Frame Design includes; Adjustable Mounting Feet, Fits easy to a variety of floor shapes. Adjustable Pedals Faces and, Adjustable Throttle geometry. High Quality, Reliable, Light, Strong & Fully Adjustable. This advert is for 2 Pedal Billet Frame Kit only for $1224 Aud (excl GST). 3 Pedal Billet Frame Kit is also available for $1673 Aud (excl GST). The Billet 2 & 3 Pedal Frame Assemblies come with, Levers, Ped
10
PE Racing offers you lightweight, reliable & high-performance Racing Pedal assemblies with Patented adjustable features to suit your driving style & increase performance. Designed for the Driver, NOT LIKE ANY OTHER FLOOR MOUNT PEDALS. This PE Racing Patented design came about as a result of common problems experienced while installing pedal assemblies to a range of racecars over many years. Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forc
68 1
Registered
The most beautiful car in the world. That's what “Il Commendatore” Enzo Ferrari said of the E-Type. Compliments don’t come any higher as this was from a man who was famously callous and dismissive of other manufacturers. Having looked over every inch of this stunning 1972 E-Type V12 Convertible, we tend to agree. If you needed any further convincing of this car’s style and pedigree, you must only look to a list of people who have at one time or another owned an E-Type. From Frank Sinatra and B
1
Wanted Hilborn fuel injection for 4 cylinder engine, prefer to suit Nissan L Series motor, but can adapt, regards AJ
10
Lotus 7/ Clubman chassis. This car was raced by my father in the 70s and has been in storage since. Believed to be a Lotus 7 but cannot verify this, the only stamp I can find on the chassis is shown in the photos. Definitely not complete but includes many parts as pictured. Happy to answer any questions or arrange more photos if required.
3
AP Racing CP6465-218 pull type master cylinder 21.8mm
4
3SET KOYA SEMI FORGED WHEEL 2 SETS HAVE GOOD SLICK TYRES DUNLOP 1 SET HAS ARE WHITE WITH DUNLOP WET TYRES NOTE TYRE ARE 265/625 R17 NOTE WHEEL ARE FOR VR VS COMMODORE
2
Near New M800 and Data Logger Dash has not been used I owned as a spare for my FD RX7 Racecar. features enabled are as follows: M800 SN1323 single lambda, Hi/lo injection, Cam control, Advance functions (Traction control, Launch Control, Gear Ign cut, Overun boost) Dash ADL Dash SN 2732 shift / warning lights 1mb logging, Pro logging, standard inputs, See attached screen shot
3 1
This is a engine I got from purchasing a chassis i was after, so all parts are for sale. This auction is for a 600hp 873Nm touque @ 5500rpm, turn key engine eveything from coils, headers, drysump set up. It has alloy 23 degree heads, 180 degree headers. JE Pistons Scat 4340 crank Manley I beam conrods Brodix 23 degree alloy heads Comp cam roller camshaft Demon carburetor Crane ignition, with Crane ignition coil, MSD Distributor, MSD Leads, Custom MRX steped headers F1 merge collector's Runs o
13
CAR REQUIRES RESTORATION JENSEN INTERCEPTOR 1974 MARK 3 RHD FACTORY CONVERTIBLE. CURRENT OWNER SINCE 1984. ORIGINALLY DELIVERED BY TAYLORS MEDINDIE SA. APPROX 89000KS ENGINE 7.2L 440cc CHRYSLER AUTOMATIC GEARBOX (REBUILT 1998) AIRCONDITIONING, ELECTRIC/HYDRAULIC ROOF, ELECTRIC WINDOWS, POWER STEERING IN RUNNING ORDER, STARTS RUNS DRIVE IDLES, VERY SMOOTH, BRAKES WILL NEED SOME ATTENTION BEFORE ITS DRIVEN. WAS REGISTERED UNTIL 2022, HOWEVER SPENT APPROX 20 YEARS MOSTLY STORED. ALL PARTS THER
15
Registered
NO TRADES SERIOUS INQUIRIES ONLY 1977 C20 FACTORY AUSTRALIAN RHD, CONVERTED TO LPG GROUND UP RESTORATION BUILT SMALL BLOCK CHEV, BIG CAM 360 HP AT THE WHEELS 1 YEARS NSW REGO AIR CONDITIONING POWER STEERING REMOTE START REVERSE SENSORS STEREO BULL BAR SIDE STEPS ON LPG / GAS (360 LTR CONCEALED TANK) THIS UNIQUE AUSTRALIAN COMPLIED UTE WAS BUILT RHD BY GMH AUST IN 1977. Inspections Dural NSW
2
This is one of the diffs out of my VL commodore race car. It's got a pair of custom brackets to suit VS front calipers and the shock mounts have been cut off as well aa the car that it was in ran a rose jointed panhard bar with adjustable roll centre sonif you were going to use this housing it will require a bit of fab for your application. It's an M75/78 with 3.89 gears an a full 31 spline spool. Im great condition.
7
Hollinger 6 speed H Pattern gearbox with Chevy bell housing and input shaft and shifter included. It has receipts for overs $9,000 in reconditioned repairs to bring it up to Like new condition. These gearboxes are very rare, so jump the order queue and grab this one now
1
Brand new Albins ST6 6 speed with paddle shift. Front bell housing for clutch. Same as Marc car setup.
5
Xtrac Sequential 6 speed. BMW M54 bellhousing and drive output, with E46 crossmember. New flywheel and release bearing. Pneumatic or lever shifted. Lever included (No paddles included)
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
13
Our Latest Generation Load Cell Simulator Kit for PE Racing Billet Pedal Assembly Designed & developed to feel realistic, and handle real life pedal forces. PE Racing Load Cell Sim Racing Kit is designed for professional Motorsport Simulators & gaming. Designed to suit the Patented PE Racing Billet Pedal Box. Driving Simulators typically see more laps than real race cars, and thus these sim cylinders must withstand the same forces with increased cyclic loads. We have designed & developed thes
6
Type 9 Quaife Close Ratio Straight Cut Gearbox. Suit clubman of modified Escort. Never fitted to the car, went for a sequential 5 speed. All new bearings/gaskets and seals I think the Ratio: 2.2/1.69/1.21/1:1/0.873500
11
Pedal Sliders Designed & Manufactured in Australia by PE Racing These are specifically designed to suit our PE Racing Pedal Assemblies and cater for the FIA fixed seat regulations. A little about our Pedal Assembly. This PE Racing Patented Frame design came about as a result of common problems experienced while installing pedal assemblies to a range of race cars over many years. Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forces ultima