73 Car, Bike or Kart under $10,000 for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
32
Roll Cage
Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) haltech and loom $2000 extra brakes - need plumbing and finishing off turbo - eith
119 1
Roll CageLog Book
Think GT3 racing and it is impossible not to think of the Audi R8 LMS GT3. One of the most successful GT3 race car of the modern era, it has amassed 83 drivers’ titles internationally and 106 championship victories – as well as eight overall victories in 12-hour races (including a record three at the Bathurst 12-Hour) and 13, 24-hour victories. It more than meets the challenges posed on all racetracks in all climatic zones and has won titles in Saudi Arabia as well as in Central Europe, Asia, A
8
Roll CageLog Book
Astra CDTi production car, Holden factory race car built by PMM for the 2007 Bathurst 12 hour sponsored by Bendon, built to showcase the power of the new diesel Astra. Also competed in the 2009 12 hour for the Holdsworth family, did some production racing for a few years after but more recently just used as a fun track car. Very well built, 6 speed, DMS suspension, Racetech seat, Performance Box with power and external antenna, we use ex Toyota 86 semi slicks for very cheap fun. Would need harne
10
Registered
2001 gen7 zzt231 celica 6 speed, Trd , rotrex supercharger,front mount intercooler etc. Has engineering cert in tasmania. Looking for a new project ?( i have another project taking my time and energy for now)This car has a blown motor after throwing a rod.Needs new block, 1 x mahl piston and rod,machining.The head/valves and crank seem ok.The motor/ supercharger had 50k on it after complete rebuild.(motor was over revved )after clutch problem. As far as power it was running 275kw atw @ 7psi o
3
This is a 1970's flat track bike with an OSSA Stilleto TT engine (also refereed to as a Dick Mann TT engine), these motors were produced for American Junior Class Flat Track with around 36 hp, I have had this bike for many years, unfortunately at 70 something I am not brave enought to race this rocket. I was told by the person who sold me the bike that the frame was a copy of an Alstar, but I cannot confirm this. Some years ago I removed the front brake and changed the rear manual disc caliper w
8
2004 Subaru Forester This was our shops hill climb/super sprint project but due to our current racing we are short on time to finish. Car is running, driving and operates fully. Interior stripped, racing seat and harnesses fitted, harness bar Fuel surge system installed BC Racing coil over kit installed 4/2 pot brake WRX calliper kit with associated bracketry to install supplied, modifications have been carried out to fit the kit, just needs instillation. 17 inch WRX light weight wheels wit
9
Roll Cage
Excel track / hill climb car agi cage xyz suspension cobra seat turn key ready to go NEG on price
12
Custom built sports racing car. Spaceframe chassis, carbon/aluminium/fibreglass panels, carbon wing, 13" three piece wheels, Instruments, fuel tank, surge tank and pump, brakes, pushrod suspension. Intercooler and radiator fitted. Electric water pump. Pedals and steering fitted. Full fibreglass moulds for body shell included. Perfect opportunity to install a motorbike engine/gearbox setup with little work required to do. Currently has a turbo G13B and LD200 transaxle fitted but these ARE NOT in
11
RegisteredRoll Cage
For sale is my 2004 Clio RS172 MK2- with ESP for $6500 or without the $5500 negotiable I have decided to sell my little pocket rocket as it is not getting use as much anymore. Great handling and fun car to drive. It was my daily for about a year and I took it to Sandown once for a track day. My intention was convert it in a track car but ended up getting a dedicated track car so here it is for sale now with a great package for someone looking for a track ready car. Currently sitting at 188356
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
7
Registered
Datsun Stanza Automatic Original interior, Original motor, everything original in good condition. Motor starts first go and runs really well. Has club registration so can be test driven anytime. Has some small surface rust spots on the usual place for the age of the car.
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900
10
Will be rolling for transport More pictures upon request View Torquay VIC Shipping nationwide can be arranged Thanks
7
Registered
Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl
7
Roll Cage
Selling my 2002 KQ Ford Laser Racecar. The car was originally built to compete in a 24 hour race but was later run on Time attack days at Lakeside park. Car includes: Roll cage Racing Seat Harness Wheels Semi Slicks Adjustable Coilover Suspension Car currently has a small hole in the gearbox from a trip into the gravel trap going into Carousel at Lakeside but is otherwise fine and runs well. Quote for repair of the gearbox was $450. Selling as I am building a RWD car for next season. Car
10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car
23
For sale: - Righetti Ridolfi Gold Kart with Rotax Max 125 (senior) - Box Trailer (registration paid till August 2024) - Stone Kart Trolley Extras included: - two suits (one brand new) - wet weather suit - extra tiers (incl wet weather tiers) - rotax lasers (for kart setup) - rib protector and neck brace - gloves - chains and sprockets Plus many many more extras. Pls DM if you have any questions or for more photos. Open to reasonable offers.
10
Unfinished BMW 2 Door Coupe sports sedan project Rocket Bunny Wide Body Kit fitted Ebay Coil overs New Rear adjustable camber arms ( Not Fitted) Hillside Motor sport Chassis Reinforcement kit front and rear Big Lock steering kit Hydraulic hand brake ( Not fitted) LS Engine plate and T56 gearbox mounts fitted ready for motor and gearbox NO MOTOR OR GEARBOX WITH SALE New 38 Litre Fuel cell and surge tank fitted Sound deadening removed Headlights and tail lights in box supplied with car Still have
12
Roll Cage
Price reduced for quick sale way below replacement value Unfinished rebuild and freshen up project that stopped due to health issues Presenting a very well looked after 250-inch Dragster Rolling Chassis, constructed by Bill & Wayne Jones Weldwell Engineering in the early 90's. The chassis is suitable for a small block engine, either supercharged or naturally aspirated and could be run in a blown class like Supercharged Outlaws or Modified Easy to bring up to latest specs The chrome moly rol