13 items under $10,000 for sale
Most Recent
Most Recent
Keyword
Price
All Results
97 1
Roll Cage
This left-hand-drive, GM Australia-built Holden Monaro is a real head-turner and the perfect car for the collector, professional racer or track day enthusiast – or the same person all wrapped up into one! The Monaro was assembled by GM Holden at Elizabeth in South Australia and is believed to be one of only a handful of left-hand-drive examples in the country. The odometer reads 31,739kms of which the vast majority (~31,000kms) were driven by Holden engineers at the Lang Lang proving ground in
32
Roll Cage
Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) haltech and loom $2000 extra brakes - need plumbing and finishing off turbo - eith
7
Registered
Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl
10
Amazing beginner race car! Mitsubishi CE Lancer 1.5L This is very much a regretful sale but life has other plans. The car was originally set up to run nugget nationals in Melbourne but I bought it and shipped it over to SA to use it as a budget regularity car. It has never let me down and has preformed flawlessly. When I bought the car, it had a brand new engine installed, it had been completely stripped of all unnecessary weight ie aircon heater interior anything that will weigh it down. Th
5
Registered
V8 Mazda Maxi Campervan S.A registered Holden 308 Possibly one of a kind Street registered with a Holden 308 turbo pattern engine. T400 three speed automatic transmission fully rebuilt with small stall Holley 600 fully rebuilt Custom exhaust Commodore rear end with welded diff Trans cooler and second radiator on bull bar Disk brakes all round The body is in fair condition and has been patched up and sprayed with a spray can Deck it out for a great Campervan Tow car for go carts Or remov
10
I’ve owned this vehicle for over 20 years and selfishly not done anything with it , time for a full restoration and return to the track after a 50 year absence . Was built in 1966 as Chimaera Mk 3 with BMC B series engine and cigar shaped body and raced by Frank Brewster. Peter Turner bought it in 1967 , renamed it Grantinni and upgraded to a larger capacity B series engine and raced at Templestowe , Calder , Hume Weir and Winton before rebuilding the car in 1969 with new rear bodywork and a Ho
9
2004 206 gti 180. Car has been stripped ready to be converted into a race car. All interior parts come with the car. Body work is straight and not long been painted satin black. Car has a clean title with sa plates. Also with the car comes a second 206 gti 180. Ex autocross car. Body work is rough but does have a cams approved speed roll cage. Rear is built to rally spec. Only needs a few more front bars to be a full rally cage. Head is off the engine. Suspected blown gasket. U.K built BE ge
10
1993 Daihatsu Charade 1.6l motor tuned 5spd manual Full exhaust system Adjustable stiffness shocks and lowering springs all round Sports stiffened sway bars front and rear Strut brace Rear disc brake conversion Race seats bolted to factory rails Detomaso Wheels and Body Kit Comes with tonnes of spares, brand new boss kit, original front seats, spare set of 13inch wheels, original suspension, original air box etc And more stuff I’ve forgotten Could be road registered with a bit of work, all the
5
Roll Cage
Mallock MK31 chassis and body moulds. Includes suspension, front uprights, rear Escort diff housing.
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
6
Jam Motorsport supply and support new Wolf Thunder cars Australia wide. These cars have a great power to weight as they make 201 (or 221 for the 1.1L) with a final weight of 378kg. They sound amazing revving to 12500rpm with their computer controlled paddle shift system. The cars are made for both entry level drivers as well as professionals. The cars are built to be customer run which is great, which means in Australia you could buy a car, do the normal maintenence your self and Jam Motorspo
25
Roll CageLog Book
Ultra Rare 1998 Porsche Supercup, here is a chance to own a piece of Porsche Motorsport history, 1 of 29 Porsche factory built 996 Supercup’s built for the 1998 Supercup season, these were the first ever 996 factory built race cars by Porsche & were the prototype for Porsches water-cooled era. A truly unique factory built prototype race-car using a mix of 993 race components & newly developed 996 race components, a 993 GT2 gearbox is mated to a unique rod shift gear selector not seen in any othe
7
GKN ORIGINAL EQUIPMENT ( OEM ) Shafts - NEW. G-Force are the distributor for GKN Race Shafts in Australia and New Zealand. Porsche and AUDI driveshafts for ALL Porsche and AUDI Race Cars available. GKN supply the shafts for these cars to the manufacturer worldwide. # 991 red shafts, car set new; $5450.00 + gst. # 997.2 green shafts, car set new: $5295.00 + gst. # 996 / 997.1 blue shafts, car set new: $4995.00 + gst. Call for further info and availability.