SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

18 Circuit Racing under $10,000 for sale

Refine Search

Clear All
Keyword
Price
Minimum
$10,000

All Results

167 1
Roll Cage
Log Book
When it comes to motorsport and specifically the versatility to be used in a range of categories of racing, not much comes close to the Subaru WRX STI. Synonymous with everything from gravel rallying to circuit racing, time attack to hill climbs and everything in between, the Subaru WRX STI is a very accomplished race car. When Subaru released the “Hawkeye” WRX (as it was affectionally referred to by WRX enthusiasts), it was met with universal acclaim from motoring journalists worldwide for its

Frankston South VIC, Australia
Share
Watch
7
Registered
Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl

Pasadena SA, Australia
Share
Watch
10
Great setup for getting started in karting. Fully enclosed, purpose built go kart trailer and 2019 senior Ricciardo Kart with Torini 4 stroke engine. Ready to go racing in the 4SS class with the clubmaxx engine. The 4 stoke has very little maintenance requirements and is the best way to get started. All spares included and current tyres only used for one practise session. Trailer has plenty of room and tows great at 110. Has extended drawbar for greater manoeuvrability and side doors for e

Edwardstown SA, Australia
Share
Watch
10
Amazing beginner race car! Mitsubishi CE Lancer 1.5L This is very much a regretful sale but life has other plans. The car was originally set up to run nugget nationals in Melbourne but I bought it and shipped it over to SA to use it as a budget regularity car. It has never let me down and has preformed flawlessly. When I bought the car, it had a brand new engine installed, it had been completely stripped of all unnecessary weight ie aircon heater interior anything that will weigh it down. Th

Davoren Park SA, Australia
Share
Watch
10
Nissan pulsar N15 SSS. The original plan was a 24 hours of lemons car but that didn't happen so down the rabbit hole we went and replaced everything. Fully reco SR20 by hoppers heads, new bearings, rings, and all seals in the head. NEW. Extractors. Remote oil filter. Large alloy Radiator. Radiator fan. Front end joints. Front and rear suspension. Exhaust. Rear brake callipers. Winmax Racing brake pads. Rear sway bar. Bridgestone potenza RE003. Bond bolt in cage. 6 point harness. Fire extin

Werribee VIC, Australia
Share
Watch
4
Registered
Clio 172 gen 2 Adjusting price as i sold few spare parts. I have been building this car for the last 6 years in the hope to make it a full race car... every part which was not good enough was upgraded and the car interior is stripped. Car is road reg and insured for 14K currently, it has: Blinstein coilovers pure motor sport exhaust with a flex and front sturt bolt to suspension OMP rear sturt and steering wheel tessa custom air flow heat shield around the brake booster wrap exhaust header rac

Reynella East SA, Australia
Share
Watch
6
Unfortunately my dreams are endless but space in the shed is not. It is now time to move on my little special to make space for the next project. It is powered by a 1.4ltr Holden Barina engine and automatic transmission, controlled by a Haltec ECU. The engine is standard aside from individual throttle bodies and extractors. It has fitted 13x8 split wheels and Avon slicks. I believe with a good operator the car will be very competitive. Please share if you know of anyone that might be interested

Thomastown VIC, Australia
Share
Watch
10
I’ve owned this vehicle for over 20 years and selfishly not done anything with it , time for a full restoration and return to the track after a 50 year absence . Was built in 1966 as Chimaera Mk 3 with BMC B series engine and cigar shaped body and raced by Frank Brewster. Peter Turner bought it in 1967 , renamed it Grantinni and upgraded to a larger capacity B series engine and raced at Templestowe , Calder , Hume Weir and Winton before rebuilding the car in 1969 with new rear bodywork and a Ho

Soldiers Hill VIC, Australia
Share
Watch
9
2004 206 gti 180. Car has been stripped ready to be converted into a race car. All interior parts come with the car. Body work is straight and not long been painted satin black. Car has a clean title with sa plates. Also with the car comes a second 206 gti 180. Ex autocross car. Body work is rough but does have a cams approved speed roll cage. Rear is built to rally spec. Only needs a few more front bars to be a full rally cage. Head is off the engine. Suspected blown gasket. U.K built BE ge

Murray Bridge SA, Australia
Share
Watch
10
1993 Daihatsu Charade 1.6l motor tuned 5spd manual Full exhaust system Adjustable stiffness shocks and lowering springs all round Sports stiffened sway bars front and rear Strut brace Rear disc brake conversion Race seats bolted to factory rails Detomaso Wheels and Body Kit Comes with tonnes of spares, brand new boss kit, original front seats, spare set of 13inch wheels, original suspension, original air box etc And more stuff I’ve forgotten Could be road registered with a bit of work, all the

Bittern VIC, Australia
Share
Watch
5
Roll Cage
Mallock MK31 chassis and body moulds. Includes suspension, front uprights, rear Escort diff housing.

Edwardstown SA, Australia
Share
Watch
9 1
Roll Cage
Log Book
Owner Is Keen to Sell, Contact Mygale Australia 'Jeff Shaw' 0428 027 977 jeff@mygale.com.au or myself for further details. Watch Video Link: In 3rd Place at Sandown until we were passed under yellow flags................ The Market Determines The Price, not the seller :) So contact me to discuss...... :) Mygale SJ11A Formula Ford Ex Jack LeBrocq & Tom Randle Car As Raced by Jack Clifford in the Victorian State Series 2022. Including: 10 Wheels (6 Brand New) Gear ratios & dogs (5 Brand new) 2 S

Melbourne VIC, Australia
Share
Watch
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando

Edinburgh SA, Australia
Share
Watch
5
Cadet 12 cart Engine hasn’t had rebuilt ever low hours on the cart New set of wets come with

Victoria, Australia
Share
Watch
6
Jam Motorsport supply and support new Wolf Thunder cars Australia wide. These cars have a great power to weight as they make 201 (or 221 for the 1.1L) with a final weight of 378kg. They sound amazing revving to 12500rpm with their computer controlled paddle shift system. The cars are made for both entry level drivers as well as professionals. The cars are built to be customer run which is great, which means in Australia you could buy a car, do the normal maintenence your self and Jam Motorspo

South Australia, Australia
Share
Watch
25
Roll Cage
Log Book
Ultra Rare 1998 Porsche Supercup, here is a chance to own a piece of Porsche Motorsport history, 1 of 29 Porsche factory built 996 Supercup’s built for the 1998 Supercup season, these were the first ever 996 factory built race cars by Porsche & were the prototype for Porsches water-cooled era. A truly unique factory built prototype race-car using a mix of 993 race components & newly developed 996 race components, a 993 GT2 gearbox is mated to a unique rod shift gear selector not seen in any othe

Melbourne VIC, Australia
Share
Watch
7
GKN ORIGINAL EQUIPMENT ( OEM ) Shafts - NEW. G-Force are the distributor for GKN Race Shafts in Australia and New Zealand. Porsche and AUDI driveshafts for ALL Porsche and AUDI Race Cars available. GKN supply the shafts for these cars to the manufacturer worldwide. # 991 red shafts, car set new; $5450.00 + gst. # 997.2 green shafts, car set new: $5295.00 + gst. # 996 / 997.1 blue shafts, car set new: $4995.00 + gst. Call for further info and availability.

Braeside Victoria, Australia
Share
Watch
8
Holden VR Series 2 Commodore unfinished project rolling shell would suit Circuit racing Drifting, has a full 6 point cams approved Roll cage fitted, two brand new cams spec Pro Force Racing seats fitted along with brand new Pro force 5 point racing harnesses , New OMP Racing steering wheel fitted, rear safety Fire wall has been installed, the whole inside of the car boot under bonnet n door jams have been painted in 2 Pack White, the whole underneath of the car was cleaned prepped n sprayed in c

Melbourne Victoria, Australia
Share
Watch