68 items in Australia with Roll Cage for sale

New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

IMPORTED BY MITSUBISHI MOTORSPORT FULL QLD REGO - CAMS LOGBOOK ONLY 24 000KM ON CHASIS 2018 TARGA TASMANIA - 2nd Class / 5th Outright Rookie Engine rebuilt less than 10 000 km ago by previous owner ( 210kw @ wheels on 98 tune ) Currently on factory Evo 8 turbo - Fuel sampler fitted to fuel line Motec ECU ( Launch Control & 2 stage Anti-Lag activated ) Proflex ball bearing cannister shocks & Adjustable Coil overs ( Eibach springs 2 sets ) Full Welded Bond Chrome Molly cage Gearbox recently fu

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

EVO7RS - Les Walkden built factory RS, Car No. L12. Ex Ed Ordynski car, CAMS Log booked, Chromoly welded cage, Freshly rebuilt Evo 9 Mivec motor to Targa spec, 250awkw, near new Owen Developments turbo, Motec ECU with anti lag, New MCA Gold suspension, freshly rebuilt RS gearbox, Coralba rally computer, heated front screen, quick release RaceTech wheel, near new oil cooler and radiator, Evo 9 front bumper and rear diffuser, new belts, new fire extinguisher plus fire bomb, 2 sets of OZ light weig

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

Car is one of 128 Porsche 944 S2's delivered in 1989 (build date is December 1989 & delivered to Hamiltons in early 1990). * Approximately 180,000km (I have full history & owners are well known within Porsche Club Victoria) * Fully rebuilt motor (slight power increase) & new clutch pre Covid with limited use since (cost $18,000) * M030 components including Brembo ABS brakes with slotted discs & new pads * Eibach springs, adjustable koni shocks (with spare springs & shocks) * I have a range of w

Price reduced for quick sale way below replacement value Unfinished rebuild and freshen up project that stopped due to health issues Presenting a very well looked after 250-inch Dragster Rolling Chassis, constructed by Bill & Wayne Jones Weldwell Engineering in the early 90's. The chassis is suitable for a small block engine, either supercharged or naturally aspirated and could be run in a blown class like Supercharged Outlaws or Modified Easy to bring up to latest specs The chrome moly rol

Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,

Targa Tarmac Rally car; built by Walkinshaw Performance for Renault Australia for Targa, mostly recently looked after by TMR. Ready to race package compliant to current Australian Tarmac Rally (ATR/AASA) regulations, comes with tons of spare parts. Surprisingly capable and well handling package; recently came 2nd in ATR Super Rally class. Genuine reasons for sale (surplus to requirements - have another Tarmac Rally car). Will also suit buyer looking for a track car. * Only 22000km * MA/CAMS