24 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
14
Roll CageLog Book
FINAL PRICE DROP!! Log Booked 2022 Subaru BRZ. Why spend $50K on a bashed up old T86/BRZ. Shake down at last year's Challenge Bathurst. Only 5000kms on the clock. 800kms since build complete. Build includes: - New Brown Davis Roll cage - New Racetech Seat - New RPM 6pt Race Harness - New Sparco wheel and Quick Release Hub - New 6 Port Isolator fitted - New Radium dual catch cans fitted - New MCA Red Coilovers fitted - New 4 Pot AP Racing 5000R calipers at the front and 2 Pot APs at the rear.
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
10
Roll Cage
Hi, I have for sale my 2010 WRX Sti Spec R hatch with 80000km on the clock. I have owned the car for 3 years and it has been my dedicated track car for the last 2 years, previously being a registered street car. The vehicle is fitted with everything you need to reliably compete at club level track days, autokhana, time attack or rally sprints etc. and has had an Ecutek dyno tune by Maximum Motorsport after all engine work was completed. The car has been maintained to the highest standards by mys
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
10
Roll CageLog Book
The vehicle is ready to race we have been competing in Improved production racing but have only taken out on track a few times due to circumstances we have decided to sell the vehicle. -The engine is only two races old -The Turbo and Intercooler have been up graded -6Pod brakes at front & 8 Pod brakes at the rear -3 Way adjustable suspension -Has been Dyno tunes with restrictor for improved production racing Loads of fun to drive around the track it's set up and ready to go.
10
Roll CageLog Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
7
RegisteredRoll CageLog Book
Chevy Love with V6 Chev engine, TH 350 gearbox. Ford 9” with nodular centre, LSD 4-11 gears. Brand new tail shaft. Good straight rust free body. Brand new rear tub and guards. Good street or drag race project. $6000 ono. Call for more information.
5
1969 Chevy Camaro top sportsman super sedan drag car 540 stack injected big block 2 speed power glide New tires brand new electrical right through car Brand new floor IHRA tech About 12 passes since engine was freshened Awesome consistent car to race
16
Roll CageLog Book
Subaru GDB Sti 2005 – Circuit, Hillclimb, Rally Car Motorsport Australia Log Booked (State Level Circuit) AGI 6 Point Bolt in Cage (MA Registered) QLD Mod Plated EJ207 2.1L Stroker Engine built by Maximum Motorsport – Receipts available. Blouch Dominator 1.5XTR 10cm Turbo Subaru Genuine Nitrided Crank – 79mm ARP 625 Head Stud Kit Manley H-Beam Rods with ARP2000 Bolts Manley Platinum Series Pistons – 92.5mm Bore x 79mm Stroke ACL Race Series Main Bearings ACL Race Series Big End Bearings Link G
7
Roll Cage
2006 Z28 Camaro Funny Car, N/A Methanol mechanical injection, 665BBC, has been running in modified, best time 7.76. Dart heads, Jesel rockers, Dominator TC, Brodix block. Supaglide Reid 2 speed box - 1.80 straight cut gear set, turbo input shaft, 8 top gear clutches, transbrake. 9 inch Strange full floater rear end. Engine and box have been freshened up ready for season but hasn't been run since 2019. Fire suppression, 2x chutes, Supajax car jacks + custom tools and trays for car for easy set up
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
12
Registered
This car is a time attack/road car. Has seen some races at lakeside. Always used Penrite 10 tenths on it, replaced oil filter after every race. Replaced Oil, Gearbox and diff oil every year. It was build and tuned to be very reliable, its only getting 184 kw at 4800rpm, 379NM @ 4500rpm. Currently doing 1:03 at Lakeside -Replaced stock small block to NEW STI block-EJ 207(Block + crankshaft + pistons) -Tomei sump Baffle kit -STI 11mm oil pump -Cylinder head servicing/machining -Roger Clark Motors
32 1
Roll Cage
General: Full chrome moly tube chassis by Chris Alston in California. Glass front, steel doors and rear. New Tailgate, body stripped and repainted in custom pearl blue. Custom wing, wheelie bars, parachute. 20l alloy fuel cell, new rear mounted battery. Linelock and quick release steering wheel, 5 point harness, alloy ice box. Completely rewired throughout. Certified by both NZDRA and IHRA. All fabrication done by Raceworks in 2021. Engine: 427 LS7 built by Steve Morris in USA in 2021, approx 10
9
Log Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
20
Roll Cage
Time to go unfortunately, Chevy Belair, new build not quite finished. Set up for A Gas and or 1/8th mile. Diff - new Chevy 12bolt with Lenco spool 5.44 gears and Summers Bros axles and "C" clip eliminator kit new tailshaft. Wheels are 15x14.5 Centreline Pro stacks with 32in slicks, 15x5 frontrunners. New cage, tubs etc. Torana front end and steering with SPAX adjustable front shockers. Engine - Sawka built, original 454 LS7 Big block, Crane R260 roller cam, lifters, rockers, Hilborn injection. T
12
Roll Cage
1999 Subaru WRX Impreza GC8 Car has been built and modified for Track day and Sprint use. Car was developed on the emphasis of handling and reliability, whilst maintaining a clean car that presents well. Car can be returned to Road registered if required. I still have all original parts and interior pieces. Engine has been built by Subaru Hamilton, and has a EJ207 STI engine installed - Semi closed Deck. - 14mm ARP head studs - DeatschWerks 1000cc Side feed injectors - Haltech PS1000 Tuned on