25 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
16
Roll CageLog Book
New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo
9
Registered
3L Convertable. Shadow black accents, GT2 Napa leather Seats, Ceramic paint protection, 1000 km.
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
6
Roll CageLog Book
****DEPOSIT TAKEN**** If needed I can sell car separately without trailer. Motor sport Australia log booked. Has always been a Top 10 performing car. Price includes all mentioned below including trailer. Car built and maintained by AMR. Sealed AMR Tuned Engine and gearbox.
- Custom exhaust
- Bolt in Brown Davis National spec roll cage
- Brown Davis Airbox
- PWR Alloy Radiator
- New latestest spec controlled Supa shock Coil Overs
- Motorsport Rims on near new tires - New brakes front and rea
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
11
Registered
This meticulously restored 1954 Chevrolet Cab Over Engine (COE), crafted by Matt Stone Racing and valued at approximately $200,000, is a true gem with impressive modern features: - The restored 1954 cab and reproduction tub painted in metallic Hot Lava Orange sits on a Chevrolet C20 pickup chassis and has been professionally converted to right hand drive. - The engine is a 2022 model 6.2-liter LT1 V8 engine producing 343kW of power and 881Nm of torque. - The automatic transmission is a 20
8
Roll CageLog Book
Price reduced. 1996 Mallock Mk32B Supersports Nissan SR20 Turbo engine with FT200 Hewland transaxle. PI dash with Autronic computer Imported from UK new, build 3 of 9 cars. CAMS log book issued 1998. Full carbon fibre body work. Bodywork moulds included for front and rear, and front splitter section. 3x sets of ENKEI one piece centre lock wheels. 4pot AP brakes front and rear KONI Adjustable shocks Injectors cleaned and serviced. 2x new Fuel Pumps, 1x Prime, 1x Main 2x new batteries Car
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
7
Roll CageLog Book
2022 Build • Control Supashocks (with camber washers) • ACT Autoworx Engine, Exhaust and Airbox • Misch’s aluminium radiator • Custom solid engine mounts • Oil cooler • Fuel pressure regulator • Recent spec AGI bolt-in cage • Custom air intake • Short shifter • Refurbished steering rack • Whiteline rear sway bar • Brake bias kit • Performance 15x7 rims with near new federals. Will come with Dunlops as well. • RPM seat with head restraint • Driver floor plate • Blower fan • Resprayed inside
6
Roll CageLog Book
This Mallock U2 was built under license in New Zealand in 1969 using all the usual components. It raced successfully for 10 years when it was purchased by a prominent racer/constructor as a base for a sports racing car to compete in the SCANZ national sports car championship during the 1980's. It was a very competitive car winning 5 championships and holding lap records at every circuit. The car was then retired and stayed with the owner/driver until the late 90's when a comprehensive restoratio
18
RegisteredRoll CageLog Book
38 Chevy 350 power, steering air conditioning airbag suspension in excellent condition will not be disappointed
9
Roll CageLog Book
Start your 2024 season with a race prepped turn key car with a fresh engine! For sale due to moving classes. Current spec Hyundai Excel Prepped and ready to race. Clean white paint under the wrap. Has a fresh built KBE engine one meeting old, sealed to current championship specs. New clutch installed with engine. Gearbox also sealed to current series spec. Modified short throw shifter with overthrow adjusters. Very well built and maintained car. No expense spared in vehicle prep. . Has been
7
Our Hyundai Excel is a race winner and a well prepared car. The previous owner was Brock Feeney and since then the car has had quite a bit of work. All the upgrades are new and the car has not been tracked since this work has been completed. We had a full engine rebuild at Norwell Motorplex, interior paint, new flocked dash, strengthened cage, new race seat with triple 8 sliders, triple 8 floor plate and many other extras. There is a new set of SUPASHOCK RACING SUSPENSION as well.
5
For sale Built 2021/22 2022 Vic state championship winner 2022 Vic club championship winner Motorsport Australia log booked Top ten contender at national level Car was built and regularly maintained by Les Small performance to the highest standard. No expense was spared on the build, everything was new and has been updated and well maintained since completion. Car continually on the podium and winning races in all states. Fresh engine and gearbox only 1 meeting old, ready for the 2024 seas
6
2023 log booked Hyundai excel front running race car What it has 2023 spec supershock Weld in roll cage (national spec) Brown Davis brake ducting Modified exhaust Velo head restraint seat Schruth seat belts Sparco steering wheel Modified air intake Braided brake lines Window Demister Elantra front wheel hubs Gear shift raiser Terry hill floor plate Light weight battery Raceline aluminium radiator Myhcron 5 st data logger Raceline window to 2023 rules Rota race wheels Comes with everything to r
5
Roll CageLog Book
1998 Hyundai excel race car, lots of good gear standard bottom end with a head done by octane ally with baffled sump short shifter done by Adam bywater in Victoria rebuilt gearbox with heavy duty clutch Darren hossack floor pan lantra front end brake disc setup Plus brand new front brake disc setup lines supplied from Wayne Milburn rota wheels out of Western Australia 8 brand new tyres Two full sets of rims mca coilovers scotts rod exhaust full containment seat pit to car race
4
Roll CageLog Book
This very special Mallock U2 started life in New Zealand racing in the clubman classes until approximately 1978 when it was purchased by a new owner for competing in the SCANZ National sports car championship with the following specifications. Lotus twin cam engine, fuel injected and turbocharged producing around 300hp. Alfa 105 5 speed gearbox McLaren M4A front disk and brake calipers. Brabham rear AP racing calipers All Brabham F1 racing wheels Dry sumped oil system. Car went on to win more
5
Roll Cage
Mallock MK31 chassis and body moulds. Includes suspension, front uprights, rear Escort diff housing.
4
Roll CageLog Book
Ready to race Hyundai i30N TCR race car with low engine and chassis hours. Extensive spares package on request.
10 1
This is a Great project car in excellent shape with a lot of spares, here is a list of parts and more pics on request. Here is a youtube link to a walk around video https://youtu.be/c_a-r3iK0fA Body in good shape all original steel doors and front fenders, smooth firewall and custom a/c bulkhead mounted. Have the front and rear bumpers all the side glass all the hardware etc. Chassis is completely finished powered coated,