108 items for sale

Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen

This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash CAMS approved/ complied roll cage Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manua

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

S3 RX7 Rally car, fresh rebuild with only two events since completion. (2022 Alpine, 2023 Southern Cassic) 13B Bridge port with 48IDA, approx 250hp ATWs, stainless extractors, remote oil filter, new PWR oil coiler with new oil lines RX8 close ratio gearbox S3 4.89 LSD with strengthened housing MCA with remote canisters, two events old S4 steering, struts and 4 pot calipers All new wiring loom Twin carter fuel pumps Braided fuel and brakes through out Pedal box with Willwood cylinders Hydraulic h

Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

I'm selling my RF89 Van Diemen, Chassis number 1415, logbook number H3442 Historic car # FC155.15.18 I imported this car from France in 2020 from the historic race car company Espirit Competition (Laurent Forte). It was a project car for the owner and his son to rebuild. For most of it's later life (2002-2016) it was a driver training car for Manadien Racing in France, who was the original buyer of the car in 1989. I have raced it in 11 races along the Eastern Coast with a race win at Morgan Pa

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc

MAZDA RX7 - BUILT IN 2016 - CAMS LOG BOOKED ROLL CAGE BUILT FOR RELIABLITY -13B BRIDGEPORT 2ND PLACE BATHURST CHALLENGE 2019 1ST PLACE OVERALL REPLICA TOURERS 2021 NEW ENGINE BUILT BY SIMON @ MACGREGOR MECHANICAL NISSAN SKYLINE FRONT BRAKES INJECTION PERFECTION MICRO TECH DASH SERIES 3 LIMITED SLIP DIFF - STRONG RELIABLE CAR VN COMMODORE RADIATOR KEEPS THE CAR COOL - PLUS EASY TO GET. NEW FUEL PUMP UPGRAGED SET UP. LIGHT WEIGHT COULD EASILY ADD GROUP C FLARES & WHEELS FOR A MOCK UP. PLENTY OF

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh