42 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
9
Roll CageLog Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
10
RegisteredRoll Cage
MY03 STI Tarmac Hill Climb / Circuit Sprint Car Built to be reliable and fast • Aust Delivered MY03 STI • 207,000kms • Handbook Serviced and Upgraded at S&J Automotive o MRT S/S Turbo Back Exhaust o MRT 500HP Fuel Pump o S&J VVT Upgrade o EcuTeK Type 3 Custom Dyno Tuned with 210kw ATW o Rota 18 x 8.5” Wheels o Federal R-Specs 235/40 R18 o Half Cage o Harnesses o new Extreme competition clutch o Cusco Brake Support Bracket o Perrin Wing Stabilisers o Coil over suspension A very c
32 1
Roll Cage
General: Full chrome moly tube chassis by Chris Alston in California. Glass front, steel doors and rear. New Tailgate, body stripped and repainted in custom pearl blue. Custom wing, wheelie bars, parachute. 20l alloy fuel cell, new rear mounted battery. Linelock and quick release steering wheel, 5 point harness, alloy ice box. Completely rewired throughout. Certified by both NZDRA and IHRA. All fabrication done by Raceworks in 2021. Engine: 427 LS7 built by Steve Morris in USA in 2021, approx 10
19
Roll Cage
Subaru WRX GD Hawkeye Tuned by STI Great car ready to drive nothing to spend Pictures tell the story original km as per photo Basically standard engine timing belt kit done including all pulleys and water pump Has STI top mount intercooler and pod air filter with aluminium radiator Brand new Rota gravel wheels 18inch with brand new Nanking AR1 tyres 225/40/18 Band new aftermarket Brakes 6 pot front 355 mm discs 4 pot rear 355 mm discs Full Invidia 3 inch system turbo back Brand new Sparco ci
9
Log Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!
10
Roll CageLog Book
Gary Hansen RaceCraft built (USA) ex Pro Stock, complete roller, Koni electric shocks, Race Pack dash, race pack SC 1000 data logger, Lamb brakes, Ron Davies radiator, 40 spline Mark Williams axels, Weld Magnum wheels.. too much to list Has gone 7.22 @ 191 mph, will suit a wide variety of classes This car has less than 200 passes Please call for more information
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
20
Roll Cage
Time to go unfortunately, Chevy Belair, new build not quite finished. Set up for A Gas and or 1/8th mile. Diff - new Chevy 12bolt with Lenco spool 5.44 gears and Summers Bros axles and "C" clip eliminator kit new tailshaft. Wheels are 15x14.5 Centreline Pro stacks with 32in slicks, 15x5 frontrunners. New cage, tubs etc. Torana front end and steering with SPAX adjustable front shockers. Engine - Sawka built, original 454 LS7 Big block, Crane R260 roller cam, lifters, rockers, Hilborn injection. T
6
Roll CageLog Book
Ready to race dragster.Engine 400ci Small block chev,runs methanol.Engine rebuilt in 2022 .Has run 1 meeting. Transmission 2speed Powerglide transbrake and timer.Verry reliable and consistant.Last 3 runs were identical times. Runs 8.3 At sea level. A built in trailer with 4 new tyres included.
5
Roll CageLog Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das
7
Roll Cage
2000 Subaru WRX Race car/Track car/Hillclimb car Car was built from a road car 5years ago, every nut and bolt has been turned on the car. Has been painted inside and in the engine bay gloss white in 2pac, wheel wells have been painted with septone black sound deadener. Has state level bolt in cage done by bond rolls bars and is registered. All other upgrades and work is listed below any other questions or enquires please feel free to message or call me, inspections can be arranged. Can help wi
5
Roll Cage
This 72 Camaro is a project I started to build for the Australian Tans Am class. It has been caged and had the floor modified to suit the correct gearbox and where the muffler will sit. It has also had the pedal box master cylinders installed. The only thing missing is the 2 front guards. The car will also come with 2 brand new full quarter panels, a fiberglass bonnet, new race seat, pedal box, race fuel tank and brand new limited slip differential from the US. I have spent $25,000 to date
7 1
RegisteredRoll CageLog Book
1997 Japanese import v4 STI 90,610 km. Alloy bonnet swapped to standard at some time prior to 2002. Modified for circuit racing and tarmac rally with emphasis on reliability and handling. Fully registered in Tasmania since 2002. Driver's seat belt operational. Roll cage – CAMS logbook. Battery isolation switch with removable key, window net. Engine rebuilt by Robin Berado and associates in Brisbane. Street force modified heads, closed deck block (welded). Billet con rods, forged pistons and c
6
Roll CageLog Book
2003 WRX used for sprints rally & track days. Very reliable great entry level car. 200km on new clutch & gearbox. Near new front rotors, front and rear pads. 2nd set of rims & tyres. Brown Davis state level roll cage. Car is logged 3J. Maintenance & race prep by Ravage race works
8
Roll Cage
HI ALL FOR SALE " OUTLAW NITRO FUNNY CAR 125IN " CHANCE OF A LIFE TIME TO OWN , 125IN CHROME MOLY CHASSIS STRANGE TOP LOADER REAR END WITH CARBIN FIBRE BRAKES , LENCO 2 SPEED & REVERSER , 10.5 FULL TITANIUM CLUTCH & CAN , M/T FRONT & REAR RIMS & TYRES , TFX BLOCK BRYANT CRANK MILLER RODS VENOLIA PISTOND DART BILLET HEADS " PSI BLOWER WATERMAN PUMP ENDERLE BIRD HAT , FULL RPM DATA COMPUTER SYSTEM , ABSOLUTELY NO MONEY SPARED ON EQUIPMENT & PRESENTTATION ON THIS BUILD . CAR IS HAND PAINTED
3
Roll CageLog Book
1969 Chevrolet Camaro Log Booked Group N race car Car was built in 2019, fully stripped down sand blasted and built from there. Fresh Motor 350 Chev, done 3 meetings. New Auto Gear Muncie gearbox, Tilton gearbox pump. Avco Shocks and Custom King springs, Watts linkage. PWR radiator Race tri Y headers 3 Sets of rims, superlites It is a consistent Podium finishing car, one of the top Group N Camaros. Serious Buyers please give me a call. more photos/videos will be provided for serious buyers.
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.