SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

111 items under $10,000 for sale

Refine Search

Clear All
Keyword
Price
Minimum
$10,000

Featured ads

All Results

3
Part no. 100.3365.70 365mm Brand new still in box Cost $2,260

Brookvale NSW, Australia
Share
Watch
10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car

Williamstown SA, Australia
Share
Watch
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.

Lockleys SA, Australia
Share
Watch
42
Roll Cage
When it comes to iconic automotive styling, the first-generation Audi TT immediately springs to mind. Revolutionary in first generation form, the Audi TT was manufactured from 1998 to 2023 but it is the iconic Mk1 that achieved cult status in the automotive world and is now considered somewhat of a modern classic. Having said that, aside from its exterior styling, the Audi TT you are looking at is a far cry from the cars that rolled off the Audi AG production line in Gyor, Hungary. In fact, thi

Alberton SA, Australia
Share
Watch
6
Open Wheel car trailer will suit most open wheel race cars. Built to transport an Historic Formula Atlantic. The Trailer has a winch and excellent storage. Dimensions are. Rear opening 1.960 wide, Internal width 2.250, OA width 2.320, Internal length 4.450, Distance between wheel arches 1.800 and internal height 1.150. It has electric brakes and a manual tilt mechanism. Well, maintained and in very good condition.

Port Macquarie NSW, Australia
Share
Watch
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.

Morphett Vale SA, Australia
Share
Watch
10
Unfinished BMW 2 Door Coupe sports sedan project Rocket Bunny Wide Body Kit fitted Ebay Coil overs New Rear adjustable camber arms ( Not Fitted) Hillside Motor sport Chassis Reinforcement kit front and rear Big Lock steering kit Hydraulic hand brake ( Not fitted) LS Engine plate and T56 gearbox mounts fitted ready for motor and gearbox NO MOTOR OR GEARBOX WITH SALE New 38 Litre Fuel cell and surge tank fitted Sound deadening removed Headlights and tail lights in box supplied with car Still have

Upper Orara NSW, Australia
Share
Watch
12
Roll Cage
Price reduced for quick sale way below replacement value Unfinished rebuild and freshen up project that stopped due to health issues Presenting a very well looked after 250-inch Dragster Rolling Chassis, constructed by Bill & Wayne Jones Weldwell Engineering in the early 90's. The chassis is suitable for a small block engine, either supercharged or naturally aspirated and could be run in a blown class like Supercharged Outlaws or Modified Easy to bring up to latest specs The chrome moly rol

Kurrajong Heights NSW, Australia
Share
Watch
4
SUIT FORD 9" ... Unit Is as new 4.33 Ratio for 31 Spline axles - PVC case included - Note: this is the updated GoldTrac Platinum with increased strength internally around the gears ...

Ingleside NSW, Australia
Share
Watch
21
Mario Custom Heavy Duty 13x6.6 single axle tilt trailer. This trailer has been designed to fulfil every situation for normal trailer application from Gently carrying my Wren Formula Ford, Granlee Clubman to be able carry a 2 tonne tractor if required.it’s been galvanised along with its heavy duty ramps to be able to softly carry a delicate racecar to a heavy tractor or car if the necessity arose. It has 2 tonne semi elliptical springs. Everything on this trailer was built from new equipment, do

Cobbitty NSW, Australia
Share
Watch
8
Roll Cage
Sold Pending Pick Up. Datsun Sunny Race car. Cheap Track or Hillclimb car. 2 litre, 5 speed, 4 wheel disc brakes, full roll cage. Needs a bit of work to get up to scratch. No rust apart from some surface rust on paint. Not sure of the exact mods of engine etc, I purchased the car as a project but decided to go in a different direction. No choke hooked up on the SUs so runs like pig when cold, fine ones it's warmed up, but they probably need a tune. It has heavier springs but probably needs new s

Jerilderie NSW, Australia
Share
Watch
3
Sparco helmet Wtx-7air, carbon. Size 58 Medium. With clear and dark blue tint visor.. Standard SA2010 8858-2010 Postage extra unless picked up.

Exeter NSW, Australia
Share
Watch
3
Roll Cage
Log Book
1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.

Hindmarsh SA, Australia
Share
Watch
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.

Cherry Gardens SA, Australia
Share
Watch
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.

Cherry Gardens SA, Australia
Share
Watch
16 1
I have too many projects, so the 86 must go... This car can go back on the road with a few repairs to the right hand side and I haven`t checked but I think the forklift driver popped out the wheel hub when it was lifted as the wheels went form being straight before sale to one pointing out after delivery. I had plans to add a LS3 so it comes with a kit to mount a LS3 motor and a unused Velo extra large race seat. Fueltech wiring kits are available for the 86 to ls3 conversion and a 3 in 1

Sherlock SA, Australia
Share
Watch
9
This trailer is always kept in the shed and has travelled only 20,000 ks, 95% bitumen. Registration expires in approx 11 months. Dimensions not including the front compartment 2220 x 1660.The suspension is independent Timbren Canadian, dampened with Pedder Shocks and has electric brakes. The floor frame is heavy duty steel ladder construction, clad with extra heavy duty aluminium checker plate. The ramp is heavy duty aluminium checker plate over steel frame. The external black cladding is Colou

Nairne SA, Australia
Share
Watch
1
Ingersoll Rand 1" Drive Impact Wrenches as supplied by Hurd Pit Tools in the USA. 1 x brand new (unused) 1 x almost new (very little use) Price for both

Mittagong NSW, Australia
Share
Watch
8
4AGE for sale bought for a AE86 build but going a different direction selling on behalf of customer. built by John Henden in 2007 and used in a clubman for a short time than sold and has been in storage since. made 112kw and 163nm, comp ratio of 12.15 so its safe to run on 98 cams are 9mm lift 304 duration. has a hand written note book from engine builder with specs . engine is fitted with ITBs and was running with the wolf3d engine management. has a light weight flywheel fitted and a c

Berrilee NSW, Australia
Share
Watch
3
Bilstein Suspension for Datsun Stanza. Shocks valved by Heismans. Suspension and the front coilovers fabricated and gussetted by Heismans. VT Holden Caprice front calipers. Ventilated discs, 285mm diameter X 22.6mm. Braided brake lines. Standard Nissan 4 stud wheel pattern. Spare set of brake pads. 2 sets of rear springs with valved Bistein shocks. All in excellent condition. Very cheap price. Located in Leura, NSW.

Leura NSW, Australia
Share
Watch