159 items between $30,000 & $50,000 for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
9
Trailer fits Sprintcar with wing on and Mule. 12v winch and LED lights, with anderson plug. Wired for 240. Compressor lines are run underneath and come up thru floor in 2 points. Holds spare top wing , 2 front wings, front axle , Diff, shockers, radius rods, torsion bars, all HRP. Tyre rack. Floor has Marine carpet . will hold 7 cherns . Dimensions are 9mtr inside . 2.4 wide. 2.6 high. 70mm tow ball Selling due to something with a bigger set up for travelling
10
Roll CageLog Book
Aussie Racing Car with Trailer and spare parts! Selling our Euro GT Mercedes Benz Aussie Race Car and custom trailer. Only done 2 practice days since Bare chassis rebuild, including rose joints, brake lines, powder coat chassis + paint body. John Connan Engine. Comes with spares package (wheels/tyres, complete NEW front bonnet and splitter, oil, brake lines etc). Comes with brand new custom built enclosed trailer (alloy composite panels, Alcoa torsion suspension). Might consider separating car
6
Roll CageLog Book
Ready to race dragster.Engine 400ci Small block chev,runs methanol.Engine rebuilt in 2022 .Has run 1 meeting. Transmission 2speed Powerglide transbrake and timer.Verry reliable and consistant.Last 3 runs were identical times. Runs 8.3 At sea level. A built in trailer with 4 new tyres included.
3
Roll CageLog Book
2012 Mygale FF Kent Very tidy competitive car less engine, One season on rebuilt Hewland including new crown wheel & pinion. Koni 2 ways Full Motec system including beacon 2 x spare sets of wheels. Several ratios and some spares Quick lift jack. .
10
RegisteredRoll Cage
For Sale is my “Evo 3” street and track car. In 2019 the car was refreshed, looked over and motor was rebuilt by the highly regarded Mitsubishi Evolution specialist Nick Ashwin of NA Autosport and Engineering. The invoices for this work total over $30,000. For those unfamiliar with Nick he renowned as one of the best in the business having worked for the likes of Chris Atkinson, Possum Bourne Motorsport and Neal Lowe Motorsport amongst other local and international outfits.
The car is obviou
10
NEVCO EZY APPROACH TRAILER ( 5 TON ) Nevco’s proprietary Ezy Approach system allows the loading deck to lower effortlessly to the ground and depending on loading deck length offers less than 3 degrees approach angle. Simple push button controls and loading at ground level make loading and unloading a safe and fast one-person operation. The loading deck may be covered either fully or partially in Nevco’s Integrated Tie-Down System (NITS) which makes load restraint simple and efficient in any pos
23
Roll CageLog Book
Global MX-5 cup car , built by Long Road Racing ( LRR) in the USA. 4 Were brought into Australia by Mazda Australia. Chassis 54 built by LRR in April 2016 Eligible to race in Sports Production class 2F Only ever one owner and one driver Privatly campaigned in 2019 and 2022 plus a few practice days at Qld Raceway Low milage !. Cost $75000 AUS in 2016 CAR INCLUDES A.I.M dash Custom ECU Race communication system Life Line fire and safety system 4 wet tyres that have never been used 4 extra Ra
12
Roll Cage
1999 Subaru WRX Impreza GC8 Car has been built and modified for Track day and Sprint use. Car was developed on the emphasis of handling and reliability, whilst maintaining a clean car that presents well. Car can be returned to Road registered if required. I still have all original parts and interior pieces. Engine has been built by Subaru Hamilton, and has a EJ207 STI engine installed - Semi closed Deck. - 14mm ARP head studs - DeatschWerks 1000cc Side feed injectors - Haltech PS1000 Tuned on
27
Roll CageLog Book
Porsche 928s 4.7 liter V8 track car. Built by Weltmeiser Porsche specialists. Car was in storage for 15 plus years and has recently been recommissioned and has only completed 3 track days. I have a receipt for over $10000 for this work. Some of the work carried out is as follows; - Removal of complete fuel system, tank etc. blew out all fuel lines replaced and flow testing of injectors and new genuine bosch fuel pump - New cams belts and water pump - Removal of brakes discs and machined disc
7
Roll Cage
2000 Subaru WRX Race car/Track car/Hillclimb car Car was built from a road car 5years ago, every nut and bolt has been turned on the car. Has been painted inside and in the engine bay gloss white in 2pac, wheel wells have been painted with septone black sound deadener. Has state level bolt in cage done by bond rolls bars and is registered. All other upgrades and work is listed below any other questions or enquires please feel free to message or call me, inspections can be arranged. Can help wi
10
BMW E30 M3 Replica. EOI - This has a full fibreglass 1 to 1 kit, more than 20 parts to it. - Car has also got a m52 B28 engine swap. - Custom satin white vinyl wrap with Warsteiner livery - Sparco seat only 2 yeas old - Harness only 2 years old - Big brake kit on front from rx7 turbo - rotors have seen 5 track days and pads are new - Koni adjustable shocks all round, Eibach springs in front and custom coilover King spring in rear - BBS reps with bolt on hubcentric spacers - LSD diff - Short s
6
Originally built for the Australian Motor Racing Series. Raced once but series stopped. Since then the engine was rebuilt with best components available. Engine Being a 3Litre 6G72 Mitsubishi Twin turbo V6. Components included Corillo Rods, Ferera Valves, JE Forged pistons, Garret GT 28 turbos, Custom ground cam etc. Very limited miles on engine. PWR twin intercoolers and water radiator. Six Speed Hewland FGB Transaxle with new internals receipts adding up to 15k. Aim Pro Dash with Haltech eng
15
Australian built F2 . Engine is a Renault 1600cc Gordini. Gearbox is a Hewland mk5. Need to sell as no longer used. Spares included tyres wheels engine block and pistons. Has a new historic log book.
7
For Sale: Albins ST6-i4 with transfer case and torque converter All tanks + Lines . Albins shifter with motorsport connections strain gauge knob , new condition - ready to go and ship, avoid the Albins wait times. Option have a gu patrol transfer there also with albins input shaft, fully rebuilt $40,000 ono
11
Introducing Australia's newest form of motorsport. Yacar Cross Karts. Imported from Spain. Log booked as Formula Libre and ready to race. Available in asphalt or gravel setup. Ideal machine for Autocross, hillclimbs or circuit sprint events, these karts do it all. Specs include: Fully adjustable suspension 600cc Suzuki Engine Brembo Brakes Hydraulic Handbrake Large gear display Adjustable rake bias Get in touch if you would like some more information. Located in Melbourne, delivery availabl
10
I originally bought to run in Improved Production series Full race car from the UK, cost $70k landed and spent another $20k on upgrades. Massive spec, new AIM dash with GPS, new disc’s and pads, Electrical fire extinguisher serviced. T45 Custom cage, CAMs log booked. Air jacks and lance. 11 wheels in total. Second radiator for better cooling. Short shifter Upgraded intercooler Titan pedal box Light weight GRP panels Got spare engine, gearbox, shell, body panels.
10
Roll Cage
Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute
3
Championship winning team has 2 drives available - 1 x Duratec and 1 x Kent for the 2023 QLD Formula Ford Championship. Fully prepared ready to race, full trackside support including spares, coaching, pit crew etc. All costs included except for tyres and accident damage. Reasonable budget required. Price subject to package requirements. Call Greg 0411 052 944
18
Major upgrades include, uprev tune 5 stage by rev zone, 230kw @ 6764rpm (315kw at fly wheel) coil overs with eibach linear springs - 9.5kg rear / 11kg front. Cusco RS 1.5 weigh LSD Z1. Motor sport dif cooling cover AP racing 6 pot front brake kit with endless ME20 pads. Akebono 2 piece rear rotors with endless ME20 pads. Stillen front splitter Stillen front canards. Z speed aluminium under shroud. Rev Zone custom front alloy under tray. Evo R rear wing, Stillen gen 3 long range intakes, Stillen
13
Registered
Now QLD Regoed and Mod Plated 1997 BMW E36 328i coupe - 6 litre Chevy LS2 inspected and refreshed - Mild cam package (112 LSA) - 6 speed manual Tremec TR6060 gearbox - Alloy radiator with Spal fans - Stainless exhaust - Custom made driveshaft - 8 Bolt 3.9:1 limited slip diff re-built in 2016 - Solid M3 axles (not the hollow ones found on certain models) - Genuine BBS wheels - Varex muffler for variable exhaust volume - Coilover suspension - Reinforced rear strut towers (common probl