125 items under $10,000 for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
4
3SET KOYA SEMI FORGED WHEEL 2 SETS HAVE GOOD SLICK TYRES DUNLOP 1 SET HAS ARE WHITE WITH DUNLOP WET TYRES NOTE TYRE ARE 265/625 R17
17
Lucas Fuel Injection off Lotus Twin Cam 6mm Metering unit, High pressure electric pump with filter. belt driven low pressure pump metering unit with drive throttle bodies slides in very good condition. Has been in storage for a number of years, I would recommend new lines and a check through before using. Can be freighted Australia wide or International must be with insurance .
6
AP Single plate , plate is 10 7/8 spline presents as new measures 2.63 mm . Can post Australia wide
2
Near New M800 and Data Logger Dash has not been used I owned as a spare for my FD RX7 Racecar. features enabled are as follows: M800 SN1323 single lambda, Hi/lo injection, Cam control, Advance functions (Traction control, Launch Control, Gear Ign cut, Overun boost) Dash ADL Dash SN 2732 shift / warning lights 1mb logging, Pro logging, standard inputs, See attached screen shot
2
This is one of the diffs out of my VL commodore race car. It's got a pair of custom brackets to suit VS front calipers and the shock mounts have been cut off as well aa the car that it was in ran a rose jointed panhard bar with adjustable roll centre sonif you were going to use this housing it will require a bit of fab for your application. It's an M75/78 with 3.89 gears an a full 31 spline spool. Im great condition.
5
A Carbon Fiber rear three element wing for Hillclimb Time Attack cars. This wing has never been fitted to a car and is as new. I imported the wing from the UK at a cost of 5000GBP. The elements have hard points engineered into the structure for mounting and support. Main Element Length is 1720mm and cord is 300mm. Second element is 1720mm x 120mm and third element is 1720mm x 115mm. Each element can be adjusted or removed.
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
32
Roll Cage
Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) haltech and loom $2000 extra brakes - need plumbing and finishing off turbo - eith
8
2012 tandem race car trailer Beaver tail Hidden pull out ramps Electric winch Will come with a new battery Breakaway system Deck is 14ft Total length of trailer and draw bar is 20ft Inside the guards are 1,900mm The total width of the trailer is 8ft Registration until November
3
This is a 1970's flat track bike with an OSSA Stilleto TT engine (also refereed to as a Dick Mann TT engine), these motors were produced for American Junior Class Flat Track with around 36 hp, I have had this bike for many years, unfortunately at 70 something I am not brave enought to race this rocket. I was told by the person who sold me the bike that the frame was a copy of an Alstar, but I cannot confirm this. Some years ago I removed the front brake and changed the rear manual disc caliper w
3
In very good condition located in Adelaide ideal for single seater period correct 50’s to 60’s or 70’s car.
7
8.2 Deck height Bought as spare but never used Suitable for turbocharging or supercharging It takes a Cleveland crankshaft and Cleveland camshaft Comes with front timing cover
11
RegisteredRoll Cage
For sale is my 2004 Clio RS172 MK2- with ESP for $6500 or without the $5500 negotiable I have decided to sell my little pocket rocket as it is not getting use as much anymore. Great handling and fun car to drive. It was my daily for about a year and I took it to Sandown once for a track day. My intention was convert it in a track car but ended up getting a dedicated track car so here it is for sale now with a great package for someone looking for a track ready car. Currently sitting at 188356
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
4
Race Simulator. Any car any Track, including rally. As new condition 3 x Screens. Sequential, Paddles and H Pattern Gears. Great fun Drive.
8
Tilton 800 series floor mounted pedal box c/w clutch, brake, throttle pedals. Pedal box is complete with 78 series spherical mounted brake master cylinders, and 76 series flange mounted clutch master cylinder. Is mounted to large alloy base and have cover to bolt over top of cylinders Comes with balance bar and adjusting cable Some options available, as have spare new cylinders, braided lines etc. Can discuss what is needed.
5
4 x Porsche Turbo cup wheels, phone Lee on 0419200201 for any information please.
8
2024 Jakoma Trailers car trailer located in Port Kennedy Measurements: 5m total trailer length 2.02m deck width between guards Specs: 2 ton rated trailer 1300kg payload Full galvanized frame Heavy duty Alko jockey wheel Mechanical override brakes 8 tie down points LED light system Ramps included 5x 14x185 tyres on Sunraysia rims Ready for licencing 12 month structural warranty
2
I am looking for a new home in Perth, for our 4WD roller Dyno. I’m hoping to find a race team or workshop who was considering a dyno and have room for it to be set up (approx 8 x 5 mtrs) I will supply the dyno plus all the supporting equipment in exchange for some realestate to set it up under a shared custody arrangement. I am NOT interested in selling it even though this is a for sale ad. I am interested in connecting with people looking at buying or leasing a dyno to discuss this very rare o
7
Registered
Datsun Stanza Automatic Original interior, Original motor, everything original in good condition. Motor starts first go and runs really well. Has club registration so can be test driven anytime. Has some small surface rust spots on the usual place for the age of the car.