SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

353 items in Australia for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

11
This is a great looking car that gets attention everywhere it goes. This car is set up for hillclimb and lapdash event, not Legend Racing. but could be returned quite easy if wanted to competed in a Tri-Series competition lapdash at Tamworth (21 - 22 May 2022). It has been modified beyond Legend racing specs. Obviously it has wings front and rea, it also has a full floor pan with skirts. Running soft slicks with little wear and plenty of runs left in them. Has a second set of rims with wets tha

Bungalow QLD, Australia
Share
Watch
14
For Sale An Albins AGB10 H Pattern transaxle gearbox with LS1 Bellhousing New In box. Has Not seen oil as its not been fitted to any vehicle, Never been out of the box since purchase. Bought Through Racetrans in NSW for an project but the overall Length is an issue for fitment into our particular vehicle. Within the gearbox you will find a pre installed Limited Slip Differential by the guys from albins and also provisions to mount an external oil cooler and pump to keep those oil temps low dur

Idalia QLD, Australia
Share
Watch
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.

Cherry Gardens SA, Australia
Share
Watch
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.

Cherry Gardens SA, Australia
Share
Watch
4
Perfect for your Bmw e36. Came off an e36 m3. All parts there to bolt up onto your M3. Includes: Wilwood Superlite 6 piston front calipers X 3 (! x RHS spare for parts) Wilwood Dynalite 4 piston rear caliper X 2 Pair front caliper 6 piston brackets Pair rear caliper 4 piston brackets Front hats and rotors pair 500km Rear Motorsport Brakes NZ 1 piece rotor crio treated 500k 2nd pair rear rotors still vgc Spare Aloloy set front rotor hats 3 sets complete pads various fronts various thicknesse

Yandina Creek QLD, Australia
Share
Watch
1
AC COBRA Team 3 AAC 111 1 piece 17 inch wheels for sale. Polished outer lip with grey centres. PCD 5 x 120. Rears 17 x 13 with 160mm back space Front 17 x 11 with 160mm back space Came off AC Cobra (Backdraft) No longer needed. Rims only. If size is not perfect for your application these guys may be able to adjust to suit https://drwheels.com.au/brisbane-wheel-modifications/ They no longer fit on my car due to large brake upgrade. Make an offer I want them gone. More pics can be sent up

Yandina Creek QLD, Australia
Share
Watch
1
Ingersoll Rand 1" Drive Impact Wrenches as supplied by Hurd Pit Tools in the USA. 1 x brand new (unused) 1 x almost new (very little use) Price for both

Mittagong NSW, Australia
Share
Watch
8
Ex Carlin F4 Professionally maintained Race Ready New clutch new belts Brand new radiator intercoolers oil cooler and lines all PWR Short and long gear ratios Spare springs pads and rotors Spare set of wheels Spare complete floor wing and bodywork New race harness 160hp ecu and 200hp ecu ( installed) Car stands available at extra cost

Coomera QLD, Australia
Share
Watch
1
Purchased new two years ago and never used due to this assembly being much too difficult to fit.into our race car. This is Wilwood part number WIL-340-3950 and the purchase price today (in Australia) is around $400- including postage. Accordingly will clear this from my collection of car parts with a sell price of $300-

New Norfolk TAS, Australia
Share
Watch
1
Purchased this unit twelve months ago with the intention of using this in our Improved Production Torana race car however found that it could not be fitted due to limited room under the dash This has never been used and the current sell price for this throttle pedal with the mechanical linkage system is $724- SKU 72615 and SKU 72-79X Do not consider we will use this and would take $480- to clear this from my collection of car parts.

New Norfolk TAS, Australia
Share
Watch
4
The car was imported by Sir Jack Brabham for David Brabham to race in the 1986 FF championship,the car has been in my position since 1987, just recently been restored to original condition. Engine : has been rebuilt by Larner Engines Chassis: striped,sand blasted & painted All new alloy panels, uprights, gearbox, oil tank have been vapour blasted & treated New Rack & pinion Brakes overhauled with new discs Alloy wheels (6) fitted with new tyres New body work. The documents are currently waiti

Windermere Park NSW, Australia
Share
Watch
10
Big Block Chev Dart Big Chief Heads 2.3"inlet valves 1.9"exaust valves 1.7 T & d rockers 3 sets of valve springs Head studs to suit Dart tunnel ram to suit tall deck All in good condition Need to sell kings Langley 2147

Kings Langley NSW, Australia
Share
Watch
5
2.0L Milligton diamond series 2 engine. Engine has done 2 events since rebuild. Pistons, bearings, valves etc. Comes with Dta management, twin plate ap clutch and slave cylinder. 6 speed samsonas sequential gearbox. No events since freshen up. Comes with a second set of drop gears and some spares, dog rings etc. May separate. Engine will have to be sold first. Perfect Ford escort rally setup. Only selling as I am changing direction of what I am doing with the car. Engine is still in car and

Renmark SA, Australia
Share
Watch
3
Toyota 4AGE Silvertop cylinder head. Valves, camshaft springs included. $450 Alloy sump for the 4AGE. $150. **sold** Various Clubman suspension components, Springs, Dampers, wishbones. etc Clamshell guards to suit a Clubman, in as new condition. black.

Mooloolaba QLD, Australia
Share
Watch
9
Was $47,500$44,500
Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.

Nelson Bay NSW, Australia
Share
Watch
6
Roll Cage
Log Book
Australian Championship winning car with MA historic log book and C of D. Built by Ian Richards SA 1982 Kevin Lewis VW Golf engine, Koni shocks and Hewland Mk9 gearbox with spare ratios. Includes 3 sets of wheels, spare body panels, moulds, wings, some engine parts and special tools. Seat belts are in date. The car is featured in Australian Motor Racing Yearbook 1983/84.

Coffs Harbour NSW, Australia
Share
Watch
9
Roll Cage
Log Book
1987 Ralt RT5 American Super Vee. Ground effects car. Constructed October, 1987, first raced November, 1987. Won the American Super Vee Championship in 1989. COD and CAMS log book. Fitted with VW Golf engine and 5 speed gearbox, Hewland internals. Comes with some spares including some rims and wet weather tyres. Also included alignment equipement, all documentation and setup specifications. $70,000 ONO. Flat bed trailer also available at extra cost.

Bonny Hills NSW, Australia
Share
Watch
8
Roll Cage
Log Book
Selling my 2011 Dallara F308 with Neil Brown Engineering Engine. Car was run by T-sport and won the 2012 British F3 National class. Car has run very successfully in the NSW formula race car championship. Engine had under 1000km on it so plenty of life left with rebuilds recommended around 5000km but have seen them up to 7000km. Car come with spare front wing.

Burradoo NSW, Australia
Share
Watch
8 1
2014 Ford Coyote Super Cobra Jet. Selling due to new life priorities, excellent engine, regretful sale. Just been fully rebuilt, no expense spared list of work below: DISSASEMBLE ENGINE AND INSPECT. SUBLET ENGINE TO SALIBA ENGINES FOR MACHINING. FIT ARP MAIN STUD Kit. FREIGHT ON ENGINE PARTS TO SALIBA. SUBLET HOT TANK ENGINE BLOCK. BORE & HONE TO SUIT NEW PISTONS. DECK BLOCK TO TUNNELS. LINE HONE BLOCK. GRIND CRANK. BALANCE ENGINE ASSEMBLY. CLEAN BLOCK AFTER MACHINING. SUPPLY & FIT OIL G

Upper Coomera QLD, Australia
Share
Watch
7
The Nota Major was the 29th car produced by the Nota factory in Sydney to the order of Mr. Barrie Garner whose intention was to win the prestigious NSW Hillclimb Championships and he succeeded by winning it in 1962. In addition he raced it between 1960 and 1962 at Bathurst, Warwick Farm and Catalina Park with some success. It features a BMC B Series engine fitted with a HRG Derrington Cross Flow cylinder head (which incidentally was originally fitted to Barrie's Morris Major sedan, hence the nam

Coffs Harbour NSW, Australia
Share
Watch