482 items in Australia for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
3
I have 19 available $40 each which is less the half price can post Australia wide
2
Porsche 996 997 Centre lock wheel travel nuts Can post Australia wide for $20
10
Roll Cage
Hi, I have for sale my 2010 WRX Sti Spec R hatch with 80000km on the clock. I have owned the car for 3 years and it has been my dedicated track car for the last 2 years, previously being a registered street car. The vehicle is fitted with everything you need to reliably compete at club level track days, autokhana, time attack or rally sprints etc. and has had an Ecutek dyno tune by Maximum Motorsport after all engine work was completed. The car has been maintained to the highest standards by mys
14
Roll Cage
URD-BMW C81 World Endurance Racing Group C Racing Sports Car. Make/Model URD-BMW C81. Year: 1982 Chassis: 5P 001 Constructor: Ungar Racing Development (URD) in Gradenau (Stuttgart) Germany. Designer: Ernest Ungar Chassis: Multi-tubular steel square section tubes with riveted aluminum sheets at cockpit and front box for pedal box. This is a reinforced space-frame, flat bottom Group C, Endurance Sports Car. Engine: BMW 3497cc, M88 (M1) S6 In-line Six, 490 bhp with Kugelfisher Bosch
6
Roll CageLog Book
1980 TIGA SC80 S2000 Sports Racing Car. Chassis: Aluminum Monocoque with tube Bulkheads and engine bay Engine: Ford Pinto 2,0L SOHC Gearbox: Hewland Mk9 (dog box) 4 Speed Transaxial gearbox. Has a Motorsport Australia Logbook and C of D. This car originally campaigned in North American SCCA Oregon Northwest Region and British Columbia, Canada. In 2013 the car was completely re-built and re-tubed by Marc Bahner Engineering in USA, fitted with a new light weight fiberglass bodywork. A number
8
Sr20de fully rebuilt. Custom made pistons for 14:1 compression, h beam rods, big crow cams, golbys adjustable cam gears, gtir intake manifold. Block was cleaned, decked and machined. Crank shaft was machined and balanced. Light weigh under drive harmonic balancer. Head was cleaned tested machined and ported. Comes with brand new clutch kit with a light flywheel. Engine is ready to bolt in and run.
19
Roll CageLog Book
Porsche 718 GT4 Clubsport Competition Race Car Never been raced No accident history 3 sets of wheels and tyres (1 set with near new wets) Air Jacks Spare brake pads Passenger seat installed 10,800kms Stilo radio pictured not included Fully maintained by Porsche Doncaster and ready to go.
13
Our Latest Generation Load Cell Simulator Kit for PE Racing Billet Pedal Assembly Designed & developed to feel realistic, and handle real life pedal forces. PE Racing Load Cell Sim Racing Kit is designed for professional Motorsport Simulators & gaming. Designed to suit the Patented PE Racing Billet Pedal Box. Driving Simulators typically see more laps than real race cars, and thus these sim cylinders must withstand the same forces with increased cyclic loads. We have designed & developed thes
6
Type 9 Quaife Close Ratio Straight Cut Gearbox. Suit clubman of modified Escort. Never fitted to the car, went for a sequential 5 speed. All new bearings/gaskets and seals I think the Ratio: 2.2/1.69/1.21/1:1/0.873500
3
In very good condition located in Adelaide ideal for single seater period correct 50’s to 60’s or 70’s car.
11
Pedal Sliders Designed & Manufactured in Australia by PE Racing These are specifically designed to suit our PE Racing Pedal Assemblies and cater for the FIA fixed seat regulations. A little about our Pedal Assembly. This PE Racing Patented Frame design came about as a result of common problems experienced while installing pedal assemblies to a range of race cars over many years. Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forces ultima
4
350 Fuel Injected Chev Engine, built as a project, only dyno time. Never installed to a car. 600BHP @7000. Autronic ECU & Harness, Miloden wet sump . SHP Dart 4 Bolt Block. Crower Crank. New parts include, NC'd Brodix Heads (1188106), stainless valves, Jessel Shaft Rockers, Brodix manifold (HV1814), CP Pistons & pins, Oliver 6" Rods, Isky roller cam 294: 302: 108. MSD dual Ignition 9:1 Comp ratio, tuned & mapped on 98 unleaded fuel. Very smooth & progressive. Ready to install. Ideal f
10
Load Spreading Washers - with 12mm locating shoulder to underside. How often do you find the panels you mount end up with the holes flogged out? Simple but effective, we designed this washer with a locating shoulder on the underside. This provides better lateral support for the connection. It reduces the bearing load by increasing the connection hole surface area. This results in less movement & reduced wear. Manufactured of Aircraft alloy in a range of sizes to suit M5, M6 & M8 counters
4
Complete set of original Porsche 997.2 S4 wheels and tires approx. 40% worn As new with no scrapes or blemishes. Fronts 19X8 235X35X19 Perilli "P" Zero Rears 19X11 305X30X19 Perilli "P" Zero
10
PE-Clamps are a quick & easy solution to mounting panels, cables, plumbing or accessories securely to common tube and roll cage sizes; eliminating the need for welding. PE clamps come in four different styles and a variety of sizes to satisfy a wide range of tube mounting needs. The images show a small example of potential uses. We have Engineered these to withstand a 10G dynamic load of 5 kg (equivalent to a static load of 50 kg) per clamp. The clamps have an optional vibration insulator th
6
ADL2 Motec Dash Good Working Condition Supplied with new harness and connector as supplied by Motec QLD Also supplied with pinout sheet Brisbane
13
Roll CageLog Book
Bathurst 6 hour race 2015 Mercedes AMG A45 2.0ltr Turbo AWD 7-speed Paddle Shift A1 Production Car This is Turn Key Ready to Race Car This car has been a reliable and competitive car competing in QPC for many years now and has been exceptionally well maintained. Easy to drive and well sorted perfect step into production car No Major Accident or Mechanical failure : Motec dash and data logging : Custom MCA Gold (1 Meeting since Rebuil by MCA) : 2 sets of whee
10
Designed for the Driver, NOT LIKE ANY OTHER FLOOR MOUNT PEDALS. This Patented Frame Design includes; Adjustable Mounting Feet, Fits easy to a variety of floor shapes. Adjustable Pedals Faces and, Adjustable Throttle geometry. High Quality, Reliable, Light, Strong & Fully Adjustable. This advert is for 2 Pedal Billet Frame Kit only for $1224 Aud (excl GST). 3 Pedal Billet Frame Kit is also available for $1673 Aud (excl GST). The Billet 2 & 3 Pedal Frame Assemblies come with, Levers, Ped
28
Roll CageLog Book
1966/2006 Factory Five Racing (FFR) "Cobra" Mk4 R Challenge Race Car - Competition Only - Current Cams Log Books - Ready to Compete We are very excited to off you this great opportunity in securing this highly sought after extremely competitive 2006 Factory Five Racing Mk4-R Cobra Challenge Race Car which was built under orders in 2006 and imported to Australia for a range of track, Targa and hill climb events. Purpose built for track competition only and then enhanced even further once here o