31 items between $10,000 & $20,000 for sale

The vehicle has been used for Regularity events at Mallala Circuit and is fitted with the following; 3 SGE NA engine with mild cam, Advanced headers with ceramic coating, stainless steel exhaust and twin mufflers. Power - 125Kw at the rear wheels. Oil catch can, pod air filter, engine oil cooler fitted with braided lines. Penrite fully synthetic racing oil used. LINK ECU G4 TST205, Custom fascia with LINK MXS Strada 5" digital dash monitoring fuel pressure and temperature, oil pressure and tempe

2011 Galvanised chassis Ali top Re door and side door Hydraulic tipping with ramps Electric brakes and front winch Dec, size 4.5 x 2 m height 2m Twin axle good tyres

This was originally built in 2007 and fully refurbished and upgraded in 2021, including a 150x50mm A Frame. Break back and beaver tail Roller rocker suspension Checker plate sides and A frame Redarc breakaway system on both axels 2m custom heavy duty aluminium ramps stored under on Teflon skids Tare: 960kg GVM: 2,920kg NSW Registration until 23.2.2025 Total length: 6.5m Deck Length: 4.5m Width between guards: 2m Total width: 2.5m Height of box: 2.2m Box dimensions: 650mm H, 750m

Pristine condition 2018 Futura lowering trailer which has always been stored inside. Factory lockable tyre rack, rock guard, car winch, spare wheel (mounted underneath), tie down straps, break away protection. Tyres near new, new battery & trailer is also fitted with an additional lockable checker plate tool / storage box. Due to construction & light weight (600kgs tare, 2500kg gross), most cars can be carried without he need for larger 4WD type vehicles. (please check your own vehicle for compl

FOR SALE: Front Running Hyundai Excel Racecar - $20,500 ONO We're offering this professionally built Hyundai Excel Racecar whether you're a seasoned racer or a beginner built to the high standard, turn the key and go. Key Features: - AGI National bolt in roll gage - Fully logbook and rebuilt engine sealed by ACT Autoworks only done 3 races since rebuilt - Racetech circuit seat - Custom Airbox Setup - Quick release steering wheel - Alloy floor plate - Short shifter - Race built gearbox

Cargo Connect 5 x 2.13 3500KG TR Tri Axel with - Connect Winch Electric plus pro Ramp Kit 2.35m Punched Ramps Hydraulic Kit for tilt Storage Box lockable in floor 10'' Alloy Mag Wheels with standard spare Near new tyres Tyre rack with straps Will suit new buyer (used to move low race car)

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

Datsun Sunny sedan built for IPRA (3J) but can easily be a Supersprint, Hillclimb or even road car. Currently running as an Under 2 litre car but could be upgraded to an Over 2 litre car easily. Excellent 1 owner body shell. Wildridge Fabrications National spec cage. R33 GTST brakes front and rear. H165/23 spline diff. Recently rebuilt RB20 gearbox. Adjustable front and rear shocks. Adjustable brake bias. New fuel cell, surge tank and pumps. Haltech Elite 1500 ECU, wide band controller and dash

Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.

1999 MGF race car. Fully road registered genuine low mileage race car, with LE500 front lights and bumper, TF suspension, TF brakes, near new seat, in-date harness and new battery. Currently log booked and sold with road wheels and tyres, but full set of race wheels (tyres need replacing) available by negotiation. Excellent entry point into MG Racing, which launches in S.A. in March.

Dual Wheels, 2800Kg Roller Rocker Springs, Steel Wheel Black or White 185R14C, Ford Pattern. • 10" Electric Brakes** • Clad in White 3mm Single Skin LCP LITE COMP PANEL (0.21MM SKIN), (Ask about Colours), 3M 4991 Taped Panels • Rear Door Fold Down, Access Door, Kerb Side, Aluminium Chequer Plate Flat Floor whole of unit, Front Panel Aluminium Chequer Plate. • Electronic Break Away Braking, Jockey Wheel, Spare Tyre • Lockable PA door all doors with locks like keyed. • Dimensions 6100mm x 1400mmhi

Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts