122 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
5
A Carbon Fiber rear three element wing for Hillclimb Time Attack cars. This wing has never been fitted to a car and is as new. I imported the wing from the UK at a cost of 5000GBP. The elements have hard points engineered into the structure for mounting and support. Main Element Length is 1720mm and cord is 300mm. Second element is 1720mm x 120mm and third element is 1720mm x 115mm. Each element can be adjusted or removed.
10
USA factory built 20' Haulmark enclosed race car hauler. Pit pal storage, vinyl curtain, 240V a/c, tool box, work bench, cabinets, warn winch with hand controller, all new insulation, front stone guard, smooth interior walls / ceiling with 1/2 carpet walls. 83" / 2100 between inside guards, 6'6" / 1981 height, and 17 feet / 5182 inside length. Trailer is: 5800 long, 2550 wide, 2270 high, 850 drawbar, 1950 high x 2350 wide rear door Not a home made cheap trailer. Queensland rego 2025. Dennis
5
Xtrac Sequential 6 speed. BMW M54 bellhousing and drive output, with E46 crossmember. New flywheel and release bearing. Pneumatic or lever shifted. Lever included (No paddles included)
3
I have 19 available $40 each which is less the half price can post Australia wide
2
Porsche 996 997 Centre lock wheel travel nuts Can post Australia wide for $20
2
Fully enclosed Trailer 7.5m long 2.2m wide 2.6m high Internal 6m long 2.2 m wide 2.1 m high Includes 4 tonne electric winch Also electric winch for back of trailer opening Fully insulated Solar panel Lead light interior Tyre rack Large side awning New tyres n mags New electric brakes and bearings Tare 780kg ATM 2500kg
8
Sr20de fully rebuilt. Custom made pistons for 14:1 compression, h beam rods, big crow cams, golbys adjustable cam gears, gtir intake manifold. Block was cleaned, decked and machined. Crank shaft was machined and balanced. Light weigh under drive harmonic balancer. Head was cleaned tested machined and ported. Comes with brand new clutch kit with a light flywheel. Engine is ready to bolt in and run.
7
7.5mt enclosed trailer, used for the last 2 years, has built in storage , 2 winches. Solar, fridge, LEDs and 12v dc systems Needs to be inspected, everything goes with trailer.
6
ADL2 Motec Dash Good Working Condition Supplied with new harness and connector as supplied by Motec QLD Also supplied with pinout sheet Brisbane
6
All steel enclosed car trailer. Built to fit Austin Healy Sprite. Car space is 1320h x 1550w x 4000mm long. Gas struts on rear door. 200AH AGM battery installed 10/6/21. New tyres fitted in 2022. Serviced with new wheel bearings about 1000km ago. Inside and outside led lights. Internal gazebo rack. 4000kg winch.
31
KRB car trailer custom built May 2023 to suit Porsche, BMW or any other low profile and wide race/sports cars. Fully galvanized construction with one-piece fibreglass roof, and Alupanel walls, very little use and in new condition with the following features: WEIGHTS Tare mass 1,700kg ATM 3,500kg MEASUREMNETS Total Length 9m (includes drawbar) Internal Length 7.6m Total Height 2.420m Internal Height 1.920m Total Width 2.46m Internal Width 2.4m Width between wheel arch 2.020m GENERAL FEATURES
7
8.2 Deck height Bought as spare but never used Suitable for turbocharging or supercharging It takes a Cleveland crankshaft and Cleveland camshaft Comes with front timing cover
2
Brand new still in box as it arrived from the US WYO Billet Lock Up Unit Includes Trans Dump Valves for air shifting gearbox Was planned to work with a 5 speed Liberty Cost $24,000 to land here from the US and they are more now Save $4,000 and 6 months wait!!
23
2013 Tandem axle custom built trailer by owner - $12,000 2 tonne GMV electric brakes on front axle hand winch 240V plus 12V 100 watt solar system with 100 amp hour battery television and aerial reverse cycle air conditioner packed with race car parts gas bottle mount rear ramps fire extinguisher and signs, fire blanket - CAMS pit bay approved 4.5kg power inverter solar lights spare tyre/jack/wheel chocks tool cabinet Fox wing awning and pull out awning jerry can holder Inside measurement - lengt
20
Professionally built in 2019 using genuine STYROMAX insulated composite panels and extrusions. Dimensions: 8.1mL x 2.4mHx2.45mW. Internal - 6.9mLX1.93mHx2.39mW Clear floor length is 5.6m and between wheel arches is 1.965m. *3.5Tonne rated and tared at 1320kg, now 1600kg tare with interior fitout. *4 wheel electric brakes and breakaway, parallel bearings and load rated wheels and tyres. *Side door and lift up rear tailgate with full length stainless piano hinges, 2 opening windows with both scree
3
New Wiseco pistons New bearings Carrillo rods Internally balanced crank Solid roller Crow cam reground Crane roller lifters Aluminium Yates Roush C3 heads Titanium inlets, stainless exhaust valves T & D shaft mounted rockers, as new Ford Motorsport High Rise Manifold Fully studded heads and main caps Isky springs High volume oil pump High volume water pump
5
8 months Rego, 2000 KG ATM, Built 2014. Suit small sports car, built for Lotus Elise, would also suit Mini, Clubman or similar size car. Could be used for as a toy carrier and has tie down points. (Lotus Elise S2 for sale in Race Car section) Fitted with override Disc Brakes, Pads just replaced. New spare tyre, 2x 40 ltr water tanks fitted, front locker box which fits 2 Marque frames, New Solar panel, New Battery, New Flood light, most trailer lights have been replaced. Remote control for
7
Fully customise enclosed trailer suitable for smaller car built for a Mk1Escort 4 wheel electric brakes 3500 ton hitch all LED lights inside and out, internal tire rack, break away switch, custom rear pod great for weather protection, batt wing side door for easy access, rear camera and great to tow.
4
2024 Jakoma Trailers enclosed trailer located in Port Kennedy Measurements: from 5m long 2.45m width Standard Features: Lightweight insulated construction Internal dimensions 2.2m H x 2.4m W Roller rocker suspension 30mm fibreglass panels Led lights inside and out Dual purpose side door Full door rear ramp 2.1m H x 2.2m W 5x Standard 14x185 tyres on Sunraysia rims 3 to 3.5 ton models as standard, 4.5 ton available on request Electric brakes standard, 10 or 12-inch brakes as suited to model Hea
2
I am looking for a new home in Perth, for our 4WD roller Dyno. I’m hoping to find a race team or workshop who was considering a dyno and have room for it to be set up (approx 8 x 5 mtrs) I will supply the dyno plus all the supporting equipment in exchange for some realestate to set it up under a shared custody arrangement. I am NOT interested in selling it even though this is a for sale ad. I am interested in connecting with people looking at buying or leasing a dyno to discuss this very rare o