SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

366 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

8
Tilton 800 series floor mounted pedal box c/w clutch, brake, throttle pedals. Pedal box is complete with 78 series spherical mounted brake master cylinders, and 76 series flange mounted clutch master cylinder. Is mounted to large alloy base and have cover to bolt over top of cylinders Comes with balance bar and adjusting cable Some options available, as have spare new cylinders, braided lines etc. Can discuss what is needed.

Altona North VIC, Australia
Share
Watch
5
4 x Porsche Turbo cup wheels, phone Lee on 0419200201 for any information please.

Rye VIC, Australia
Share
Watch
6
Semi enclosed up and over trailer Tare 540kg ATM 2000kg 14500kg winch Lock up cabinet for all your tools Entry to cabinet is two way with left hand door has a fold down ramp for easy loading. Tyre rack Rego till feb 2025

Deer Park VIC, Australia
Share
Watch
1
18"x 12" ET45 Satin Black APEX SM-10 Porsche Wheels (Set of 4) Unused but had tyres fitted and got a few minor scuff marks when they were removed.

Hume ACT, Australia
Share
Watch
8
2024 Jakoma Trailers car trailer located in Port Kennedy Measurements: 5m total trailer length 2.02m deck width between guards Specs: 2 ton rated trailer 1300kg payload Full galvanized frame Heavy duty Alko jockey wheel Mechanical override brakes 8 tie down points LED light system Ramps included 5x 14x185 tyres on Sunraysia rims Ready for licencing 12 month structural warranty

Port Kennedy WA, Australia
Share
Watch
6
samsonas gearbox SR20 Bell housing H pattern , Shifter Tail shaft , crossmember like new, One track day! ph 0418818419 cash talks

Lonsdale SA, Australia
Share
Watch
2
I am looking for a new home in Perth, for our 4WD roller Dyno. I’m hoping to find a race team or workshop who was considering a dyno and have room for it to be set up (approx 8 x 5 mtrs) I will supply the dyno plus all the supporting equipment in exchange for some realestate to set it up under a shared custody arrangement. I am NOT interested in selling it even though this is a for sale ad. I am interested in connecting with people looking at buying or leasing a dyno to discuss this very rare o

Osborne Park WA, Australia
Share
Watch
7
For Sale is my Mitsubushi FK600 Rigid Truck with a 7500cc diesel engine, GVM 12000, TARE 7089. The truck has been set up to carry 2 clubman cars &/or Historic race cars & is suitable to carry any formulae Ford type cars or sedans of suitable weight & size. The width of the pan is 2400 & the length is 6500. The pan is also fitted with a tool box, a tyre rack & wynch. A reverse camera is also fitted to the truck The rear lift is rated to 3000KG but has never lifted more then 950Kg The Truck has

Goulburn NSW, Australia
Share
Watch
2
DSSV Damping Technology shocks Originally from a SCCA title wining Prototype D Sports Racer. Used for testing and one 13 lap race.

Dernancourt SA, Australia
Share
Watch
9
Selling for a friend it’s only a expression of interest atm might be open to swaps Daf 360 auto single drive no issues 2 car carrier with heaps of storage 6 beds Split system 3 tvs Downlights multiple power points ect

Lancefield VIC, Australia
Share
Watch
16
For sale is my 2008 Isuzu F Series FSR700 LONG PREMIUM 255 truck in Automatic. Full Service History, truck originally purchased in Melbourne brand new, was used over in WA for speedway and now back in Melbourne. I have owned it for about 1 year. Custom Low profile hydraulic tail gate with super strong Rams, Designed to load low profile vehicles. Rear Air bags operated via remote. Brand new Aluminum Checker Floors through out (5mm) Brand New carbon 12k 12000lb electric winch used 3 times, with

Officer VIC, Australia
Share
Watch
10
Dual Axle, Spare Tyre included, Tare 500kgs, 2 Tonne capacity, Hydraulic Brakes, New ALKO Jockey wheel, Ramps included (2m length), x2 Petrol Can Holders, Winch, New 12V ADR approved rear lights, New ADR approved link chain, New white reflectors. Currently towing a BMW E30 (size reference, pictured). - Fully Registered until June 2024 Measurements: - Deck 1.95m wide - 3.2m start of deck to start of beaver tail - 3.95m start of deck to the end of beaver tail. - All service and upgrade document

Hastings VIC, Australia
Share
Watch
7
This trailer was built for a lightweight clubman kitcar and was used to carry the kitcar from Perth to Sydney and back. Suitable for a lightweight racecar under 900kg in weight or perhaps dirt bikes or an off road vehicle. Could also be repurposed as a camping trailer or even a food truck. It is fully road registered and way below its replacement cost. It has 3x alloy wheels and high quality Trojan Duratorque independent suspension. Currently has wood composite panels on the sides. Tare weight =

Beeliar WA, Australia
Share
Watch
4
Getrag M51 5 speed Volvo Dogleg 1st 1:1 5th 1st - 3.99:1 2nd - 2.58:1 3rd - 1.77:1 4th - 1.27:1 5th - 1.00:1 10x 29mm input spline Has speedo output to suit rally car Output Flange to suit Group A spec cars Sierra Volvo Mercedes etc Never been in a race car and in excellent condition Located on Gold Coast, Freight opitions available

Reedy Creek QLD, Australia
Share
Watch
33
Homemade 33' Gooseneck Car Trailer 3ton registered -8m lower bed length and 2.2m up top -2.5m wide -1.92m between wheel arches -Rated axle grouping of 4.5ton. -Tare weight of 1500kg -Trailer is very well made chassis is 6" x 2" 4mm wall (Welded by Qualified Boilermaker) -Additional 50mm x 6mm flat bar welded the entire length. -Also has an inner set of 4" x 2" rails that Cars would sit on that go the entire length of the trailer. -Chassis has been painted in 2 pack Black. -Entire trailer

Balberra QLD, Australia
Share
Watch
3
Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.

North Haven SA, Australia
Share
Watch
7
TRAILER IS IN PERFECT CONDITION. HAS DONE LITTLE WORK

Peakhurst NSW, Australia
Share
Watch
10
Rolls Royce of car trailers EZY APPROACH MODEL for CAR Carrying 3500kg ATM DUAL AXLE – 2000mm wide x 6000mm long deck Includes: VEHICLE ACCESS – HI RISE package. HI RISE Swing arm set up to allow vehicle access when loaded. HI RISE Drawbar fitted with Arc Xt700 jockey wheel for maneuverability. Large SINGLE level (c. 250 litre capacity storage unit) – fitted with interior LED lighting and interior “E” track cargo rail. The storage unit is linked to 1200mm high stone guard. Structural prepa

Biloela QLD, Australia
Share
Watch
11
2013 Hino Euro 5 1124 Dualcab 6 manual genuine 1 owner 62000km alloy bullbat with drive lights, dual fuetanks, navigation ,tint windows, cruise control and rear air ride towpak, taut liner 8.5 metres long 2.4 metres wide 2.4 meters high GVM 11000 GCM 20000 Aluminium loading ramps stored under tray TRUCK IN EXCELLENT CONDITION

Niddrie VIC, Australia
Share
Watch
20
2002 Mack Premium 8 speed transporter ex Speedway setup now also set up to take show car, street machine. Air bag suspension Alcoa rims and spare. Registered in Victoria. Can carry up to 6 people Double bed & two singles upstairs Sleeps one in cab, Generator 240v/12 v system air compressor, Split system aircon, Hot water / water tank / shower / small fridge/ LG Tv, Large tool box and wooden bench top Huge mezzanine area in rear, MR license only needed to drive 1.3ks on clock has had motor rebuil

Narrandera NSW, Australia
Share
Watch