44 items under $10,000 for sale

Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.

Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl

It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.

this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.

1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.

Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.

Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.

Purchased new two years ago and never used due to this assembly being much too difficult to fit.into our race car. This is Wilwood part number WIL-340-3950 and the purchase price today (in Australia) is around $400- including postage. Accordingly will clear this from my collection of car parts with a sell price of $300-

Purchased this unit twelve months ago with the intention of using this in our Improved Production Torana race car however found that it could not be fitted due to limited room under the dash This has never been used and the current sell price for this throttle pedal with the mechanical linkage system is $724- SKU 72615 and SKU 72-79X Do not consider we will use this and would take $480- to clear this from my collection of car parts.

Great setup for getting started in karting. Fully enclosed, purpose built go kart trailer and 2019 senior Ricciardo Kart with Torini 4 stroke engine. Ready to go racing in the 4SS class with the clubmaxx engine. The 4 stoke has very little maintenance requirements and is the best way to get started. All spares included and current tyres only used for one practise session. Trailer has plenty of room and tows great at 110. Has extended drawbar for greater manoeuvrability and side doors for e

Suitable for racing car or small sports car, lightweight alloy body, steel chassis with wooden floor. Lockable doors on front storage space. Alloy wheels with spare, Toyo 195R14 8 ply tyres. Rewired with LED lights plus running lights. Electric brakes with spares. Internal dimensions 4.0 metres long plus 0.75 metres front storage, 1.7 metres wide, height 1.1 metres. Long ramps lockable tailgate.. Tows beautifully.

Amazing beginner race car! Mitsubishi CE Lancer 1.5L This is very much a regretful sale but life has other plans. The car was originally set up to run nugget nationals in Melbourne but I bought it and shipped it over to SA to use it as a budget regularity car. It has never let me down and has preformed flawlessly. When I bought the car, it had a brand new engine installed, it had been completely stripped of all unnecessary weight ie aircon heater interior anything that will weigh it down. Th

Hyundai Excel Logbooked Production Rally Car Located in Tasmania, but can personally transport car to Melbourne for appropriate buyer. Turn-key PRC rally car ready to race tomorrow. Has won P2 class in the Tasmanian Championship two years running. Front running excel assuming you're a good driver ;) If you’re looking to get into cheap motorsport or rallying or maybe both, this is the best very car you can buy. Excel rallying is safe, cheap and reliable. A set of tyres lasts a season and in tw

Chev 350 brodix heads stage 10 and match ported victor junior manifold. Flowed by Bill Hanson 800 hp with brand new stainless steel valves lapped in ready to go, just needs springs and rockers $2,300 ono . Also circlematic kit for powerglide trans new $600 ono.