1,827 items for sale

Wanted Oz Racing or Compomotive Motorsports wheels. I know it's a long shot but I'm after a set of 4 Oz Racing or Compomotive wheels to suit a 1994 Escort RS Cosworth. They are a size 7J x 15 ET 25 x 108 or 16 inch will do. Please phone Joe : 0414927320

Pontiac Grand Prix GTA. This car has been built as a road course car & is the only GTA with a purposed built equilateral chassis in Australia .The car has a brand new LS2 fuel injected engine. Hightower gearbox. Winters quick change differential. Brembo 4 Spot front & 4 spot rear brakes. Penske coil over shocks. Dry sumped motor. New set of Slicks & wets. This car does 104’s at Wakefield. With over $4,000 worth of new spare parts

PSI Blown 350 chevy dart. New refreshed 2022 motor built by JB Autos over 1100 nm torque. 2022 New torque conveter and refreshed and upgrade transmistion. 2021 season ran 7.9 sec on safe tune with learner driver motor has much more Hp and torque for experenced driver. Car has not raced yet since refreshed in 2022.

Motorbike trailer with living quarters sleeps 4 and hold 4 bike has full size fridge coffee machine microwave toilet shower hot water service tv stereo inside and out it’s sectioned off so bikes in back and living up front can carry 2000lt fresh water has pressure cleaner installed to wash bikes also built in bbq has a huge Diesel gen also air con heating air compressor plenty of storage you name it this trailer has it only reason for selling as not being used any more first to see will buy it I

Location Tassie. Fresh, excellent, reliable Irving head motor. Logbooked. Extensive cage, HR seats, current SI Rego. Recent bare metal respray..No expense spared. Well sorted over many years of development. Fast. Extremely competitive Historic hillclimb or circuit capable. Sadly offered as I am hanging up my helmet. Genuine enquiries only please.

440cub dry sump, 6speed Holinger, Morison 8 throttle manifold, triple plate clutch, cage ,koni suspension, Motec system, Road Reg.

One owner from new 2006 Subaru sti wrx sti road/race/rally car! S and J billet engine with blouch dominator with no expense spent! 600hp atw road drive able car which can be taken to track or drag strip then driven home. more details upon enquiry.

Predator V8 4X4 Buggy Flat Pack Kits Build your own V8 AWD Buggy CNC Cut and Bent Tubular Chassis Tubes and Sheet Metal Ultra Narrow Differentials with Internal CV Joints Ultra Narrow Hubs with Internal CV Joints 30 Inches Wheel Travel - Front and Back A Arm IFS and IRS 4X4 Suits LS V8 Engine + Holinger RD6 6 Speed Sequential Transmission Tire Inflation and Deflation 37" Race Tyres 3" Internal Bypass Coil Overs Quick Change Transfer Case Mid Mounted Engine CDS (DOM) or 4130 Tubing Rolling Cha

Driver has aged out. Half Scale Outlaw 18” chrome moly chassis 3.5” McGee motor Mikuni carbie Polar clutch Adjustable pedals will suit all drivers Quick release steering wheel A/JD Class IHRA Tech inspection 2020 7:90 consistently Mychron 660 Data logger Comes with starter, stands, some spares. $12500 Also available 1 x brand new ZTS 2A head & neck restraints $325 used three races

Registered as a camper ($600pa) Set up for Sprincar Team Kubota Generator Billi Unit 12/24 volt dual battery system with inverter Airconditioners x 2 BAC drawer system 2 Winches 85000KLMs $240,000 plus GST For further details please contact Darren on 0418132255

Rare opportunity, RS2000 MK1 (replica) built in S.A. by Kerry Sarandis, well known and reputable vehicle and race engine builder. 2L Ford SOHC, twin 45mm Webers. Big bore extractors, Sierra 5 spd gearbox conversion, body seam welded. Corner weighted. Adjustable brake bias. Koni adjustable suspension. CK49 compliance plate. Terratrip and terraphone installed. Last outing Classic Adelaide circa 2008, has been in storage since with limited use in regularity historic events. CAMS Log Book. Hug

Oz truck Running a 383 with a 4 speed G-force dog box 9inc floating diff center. All oils changed after every race meet. Full set of fiber glass Moulds. Comprehensive spare parts list available. 22 rims. Current lap times Lakeside 55.1 QLD raceway 1.15. Full length under tray and rear defuser. Fast reliable race car has started and finished every race for the last 2 years.

G force gf 2000 McLeod clutch and billet Steel flywheel Ser5 bellhousing Ihra approved steel shield Starter motor right hand drive shifter Gearbox crossmember Mark Williams Tail shaft yolk complete set up from Pac performance rx3 13b dentist has run 7.0 all in perfect working order ready to use $12000

• 4age blacktop blueprinted and balanced only engine dyno time • Supertech valve springs with titanium retainers • Lightweight balanced flywheel with arp bolts • Quaife type 9 dog box • Motec M4 Pro all options enabled • Hurst pistol grip shifter with flat shift/ignition cut • Ishift shift light • VDO guages • Soft side tonneau’s have been replaced with fibreglass clip on covers. • Bosch 044 pump with a swirl pot and lift pump aero flow -6 braided hose throughout car • Cams log eligible for p

This is the former Donut King Racing Team's VY HSV Coupe GTO driven by Barrie Nesbitt repainted black with Formula Tech Performance decals. This very quick and solid performer was built for fast lap times by the Monaro Performance Centre and has been kept unchanged since purchase. - 5.7L V8 - 6spd manual transmission. - 9,286km - Great condition Australia Performance Car Championship - Car #5 2005 - 8th 2006 - 11th 2007 - 5th - 4 wins - 7 podiums - 1 pole - 2 fastest laps 2008 Bathurst 1

NEW OZ 5 Spoke 17x11" wheels. White. Centre lock only. Project Blueprint Offset. Suit '03 Commodore on and earlier Falcon on. Special order from OZ for restoration vehicles. From $3400+gst per set of four. Multiple sets available.

Brand new, 2019 Honda CBR500RA Signed by Wayne Gardner at the 2019 Australian MotoGP. 28Ks total (Delivery Ks) on the clock, Garaged, never ridden, as new. The signature has been professionally clear-coated over by Honda to protect it against washing and damage over time. Selling as I was intending on turning this into a track bike, but I just don't have the time to do that at the moment. I would really like to see this bike go to a MotoGP enthusiast who appreciates the value it represents

Dynojet 250i dyno with ix upgrade. It has the latest RT hardware, dual afr, short and extended carriages, custom ramp for getting longer bikes up. Sale with include 32" monitor, custom build PC, tuning programs. This dyno had all new roller bearing and universal joints installed roughly 18 months ago. Currently it is in storage. We disconnected it late October year 2021 In great working order though is dusty from storage. Has been stored inside. Custom powder coating was done same time as be

For sale, 3 fresh RX8 Cup race cars. ready to race in the RX8 Cup Series. very cheap way to race in a one make series with RX8 rotary cars. All built with new race parts ready to hit the track in a fast growing National series and CAMS state championship. Cars are all the same spec.Fresh running gear. 3 cars to choose from, Red (Driven by John Bowe) or Silver .Have been tested on the track to make sure they are ready to race. Our cars win the championships. Ask JB.

DIY - BUILD YOUR OWN V8 4X$ BUGGY Flat Pack Kits from $50K Mid Mounted V8 Engine Holinger 6 Speed Sequential Transmission 30" Rear Wheel Travel 30" Front Wheel Travel 37: Tyres Tire Inflation and Deflation 2 Seater Kits from $50K AUD (Chassis, Bulkheads, A Arms, Hubs, Diffs, Transfer Case, Steering Rack, CV Joints, Axles etc...) Other Options: Tacked Welded Chassis Kits Fully Welded Chassis Kits Turnkey Buggies (Ready to Race) Rolling Chassis