204 items between $30,000 & $50,000 for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
5
Roll CageLog Book
Toyota 86 3E Production Car Very successful car in class D of the NSW Production Car Championship, as well as 2x Class champion at the Bathurst 6 Hour. - Bond 6 point national level weld in cage - Sparco Circuit II seat (not pictured) - Scroth 6 point harness (not pictured) - Motec C125 dash - Carbon fibre door trims - Heated windscreen - MCA Red coilovers - Team dynamic alloy racing wheels - Adjustable front strut top hats - Oil cooler - Koyorad extra large radiator - Billet alloy diff hat with
15
Racing trailer $47,000 + gst 75mm ball 2.6 metre sides Sprintcar and mule both fit with spare wing Another spare wing could be mounted in there Tyre rack Front wing spares holder Front axle and diff holder Fuel can holders Shock holders Spare bar holders Built by Diverse Transport Located in Penola SA
13
Registered
Now QLD Regoed and Mod Plated 1997 BMW E36 328i coupe - 6 litre Chevy LS2 inspected and refreshed - Mild cam package (112 LSA) - 6 speed manual Tremec TR6060 gearbox - Alloy radiator with Spal fans - Stainless exhaust - Custom made driveshaft - 8 Bolt 3.9:1 limited slip diff re-built in 2016 - Solid M3 axles (not the hollow ones found on certain models) - Genuine BBS wheels - Varex muffler for variable exhaust volume - Coilover suspension - Reinforced rear strut towers (common probl
7
Roll CageLog Book
2006 Subaru WRX Rally Car. The following additions have all been installed brand new and only used for 1 rally: - Coil over suspension with canisters - Rally Safe Compatible - Monit Trip Meter with foot pedal - TerraTrip Head Sets - Gold Speedline Corse Wheels - Rally Tyres - Carbon Fibre Air Vent - New Radiator Overall: - Sparco Sprint Seats (passenger seat brand new, used for 1 rally) - Sparco 6 Point Harnesses (passenger side brand new, used for 1 rally) - CAMS approved roll cage - CAMS and A
6
Roll CageLog Book
Current spec Aussie Race Car, very competitive car in the right hands, Cobra seat with head restraints, race pac dash, spare bonnet, 4 spare wheels , $49,500
7
Roll Cage
Conroy Motorsports KIA Proceed G T 1600 Turbo 3 E Production Car. Price is $35k. The Car comes ready for the 2022 Bathurst 6 Hour with upgraded Anti Spill Dry Break System-- FIA Cage-- DBA 5000 320x28 Rotors with P B 4 Piston Calipers.--Conroy Motorsport developed Suspension with King Springs-- 12 Speedy 17" Carbine Alloy Wheels--6 Speed Gearbox with LSD-- Velo Seat. Spares-- 1 Complete Race Engine plus 2 Standard Engines--1 Gearbox-- 1 Turbo-- Pair Driveshafts-- 1 Radiator--1 Inlet Manifold--
15
Gen2 Williams Sports Racer. Brand new fitted with a used Gen 2 Hayabusa engine with a gated race sump. options available for refreshed or modified engines. These can be turn key ready to race for $40,000 or the option of complete chassis kits less engine. will come with everything you need less engine, engine and car wiring harness and tyres. The chassis kits option will come with an unpainted body. $23,000
5
Roll Cage
We changed the engine to a 968 then did the following works by a professional engine builder: 1. MID Darton Sleeves 2. JE Pistons 3. Dry Sump 4. Lightened rotating assembly 5. Carillo Rods 6. Race ported Heads 7. Race Cam & Custom Intake Manifold 8. 2 x Sparco Race seats 9. Hossier slick Race Tires 10. 1.7 kw Brosch Starter Motor
7
Registered
LHD ex American race car 4.5 V8 5/Speed fully recoed transaxle with LSD , new fuel pumps ,fuel distrlbutor and warm up sensor Fuch wheels ,new tyres race clutch ceramic brakes Sparco seats and belts 1/2 roll cage ,quick release steering wheel. On Club Plates $35000.
18
Roll CageLog Book
History: Competition history from 1977, mainly raced Amaroo & Oran Parks. Original & subsequent Logbooks come with the car. Restoration: Completed to 1983 spec for Certificate of Description purposes. Livery: Rapid Transport Mechanicals: 1380cc (new build by Ken Nelson 08/09/21) Block: Morris 1100s Crank: Steel Russell Head, CAM. All the best components I could afford for reliability & performance Pistons: Russell Eng
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.
7
15000 on motor twin a/c units hwy diff near new tyres all kitchen app ramps are 4.4mtr long
9
Gc8 wrx 2jz!!! Was a four door but had a wide body installed and rear doors deleted to fit the supra IRS in. 2jz conversion Built r154 5 speed All supra subframes and mostly a gc8 shell with everything supra underneath. All work on the car was done by top class automotive in Sydney! All fab work done by mongster fab in Sydney Brand new haltech elite ecu, look, and dash Just upholstery did the dash in alacantara and seats in alcantara blue diamond stitch. Tuned by pulse racing. Made 700hp th
6
Open to reasonable offers 1960 morris minor panel van - Full custom setup including chassis, cage, steering, suspension. Set up for Drag racing - Brand new 2 speed powerglide - Brand new Hypertune intake and exhaust manifold - New rims and tyres - Brand new Stealth B&M Shifter Way too much to list Engine is a SR20 which has been Darton Sleeved, All machine work carried out, new rods and pistons, Car runs Mechanical fuel pump and dry sump in which is all new. This car has been professionall
8
Complete turn key super sedan, near new 540 bbc, methanol,dart block new internals AFR heads pro dominator and fuel system msd 7al and 3 step delay box th400 with brake ppp shifter fab9 rear 4 wheel aerospace brakes new pwr radiator varishocks all round dj chute near new tyres early mid 9 car steel body glass hood and doors too much to list also has import approval for rego . Option of Honda 400 quad pusher and custom enclosed trailer at extra cost. Would consider the complete drive train and k
28
Lockdown project. BRAND NEW READY TO GO .7.3 MTRS INTERNAL 2mtrs high inside 1980 between guards .one piece roof .painted trim mag wheels white in COLOUR. 240v power.and led lights .ie down point’s bench rear winch on rear door .3200 kg axles 4t springs .alko brakes .spare wheel 150mm x 50 x 4mm drawbar .h/duty safety chains etc. STRUCTURAL ENGINEERED LASTEST DESIGN, Aluminium floor Brand new steel frame, new steel floor, fully painted underneath and internally. New suspension, 2 axles, springs
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers
7
"Renmax" Panther formerly a pool fab car raced in 1984/85. Now in in configuration as raced in the 90's . Fitted with v6 renault motor and transaxle, john white race engine transaxle reconditioned, all new MCA fully adjustable suspension, new rims, spare nose cone, block. Ready to go. Tilta Trailer at extra cost. $000's spent must be sold. Current livery of Renault Le Mans car. Quick car.
12
Pontiac Grand Prix GTA. This car has been built as a road course car & is the only GTA with a purposed built equilateral chassis in Australia .The car has a brand new LS2 fuel injected engine. Hightower gearbox. Winters quick change differential. Brembo 4 Spot front & 4 spot rear brakes. Penske coil over shocks. Dry sumped motor. New set of Slicks & wets. This car does 104’s at Wakefield. With over $4,000 worth of new spare parts
17
Oz truck Running a 383 with a 4 speed G-force dog box 9inc floating diff center. All oils changed after every race meet. Full set of fiber glass Moulds. Comprehensive spare parts list available. 22 rims. Current lap times Lakeside 55.1 QLD raceway 1.15. Full length under tray and rear defuser. Fast reliable race car has started and finished every race for the last 2 years.