89 items between $10,000 & $20,000 for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
2
2016 Tickford Racing Super Black Racing Ice Break Bonnet (unsigned) Ford Falcon FGX Supercar driven by Chris Pither Event: Coates Hire Sydney 500 Track: Homebush Street Circuit (Last Event) Price negotiable for serious buyers will consider all offers best offer will be taken onboard Freight available within Australia
7
Roll Cage
Track Day or IPRA contender, Nexan Semi Slicks, Intima Race Pads, Race Seat, Full Harness, Window Net, Bonnet pins, Kill switch, Four Rota 17 inch and four Standard 18 inch Rims, Cert for Cage, standard drive line and 8,000 RPM motor. No Log Book but tech ready , No Reg, Low K's excellent condition with a few more upgrades off the shelf, a great Hot Hatch.
6
Roll Cage
KIA STINGER FOR SALE, HAS ROLL CAGE FITTED AND PARTS NOT FITTED YET, SOME BRAKE UPGRADES, OIL FILTER ADAPTER, GLASS FIBER ROOF PANEL TO REPLACE THE GLASS. WE ARE NOT GOING TO GET IT FINISHED AS WE HAVE SPENT 90K TO GET THE NEW GR 86 RACE CAR, we are looking to get some of our outlay back. 18 for the part built race car, blue. with parts purchased to fit. could possibly get more by striping but that would be a waste. new project needs.
7
Roll CageLog Book
The ex Grand Prix Mazda/Murray Coote Group C Touring Car and Group A Rally Car. Raced in the QTCC and some ATCC races 1982-1984 winning the Under 2L class of the QTCC in 1983, in 1985 it was converted to a Group A rally car, winning the Queensland Rally Championship that year, and the QLD round of the Australian Rally Championship. 1982 Mazda 323SS (not Familia) with twin carbs, 5 speed, pedal box, healthy refreshed/dynoed engine. Part converted back to Group C specification, requires some bo
10
Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.
26
2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg
7
1980 Isuzu Truck Setup as a Car Transporter. Curb weight 5400kg, GVM 9000kg Reliable 6 cyl Turbo Diesel, Manual. 9500lb winch. Twin fuel tanks, underbody toolbox and small water tank 3 Seater, seats in good condition. Runs and drives. Needs work for RWC - oil leaks, minor rust in cab, etc Going in a different direction, time to move it on. $10000 Located in Toowoomba. will consider swaps (plus cash either way) for a car trailer, 4WD, old school projects, camper/motorhome, motorbike... show m
23
EX WGR SUPER V8 2001 RACE MOTOR BLOCK BRONZE LIFTER BUSHES NEW JE 4.030 PISTONS,RINGS'PINS,ROLLER LIFTERS,CAM,JESEL CAM BELTS PULLIES,4XBOLT MAIN CAPS,NEW DRYSUMP,FITTINGS,HOSE,PUMP,FLYWHEEL,BALANCER,JESEL ROCKERS,NEW LP MANIFOLD,PUSH RODS HEADS ARE BEAR BUT HAS NEW VALVES ONLYROCKER COVERS,DIZY,WATER PUMP,NEW BIGEND AND MAIN BEARINGS, THIS IS A ALL SUPER V8 PARTS ENGINE. VERY LITTLE PARTS NEEDED TO COMPLETE. ALSO HAVE 2 NASCAR SBC BILLET 350 CRANKS $1,000 EACH AND HOLDEN 308 BILLET
40
Registered
Track day - Road Rally - Fast Road Car- Your choice Saab- the iconic Swedish car maker led the world in turbo-tech... witness Stig Blomqvist's rally wins - This immaculate tribute has all you need for great fun as a tarmac or gravel rallycar, a hill-climb champion, track day hero or you could easily return to road trim and cruise the highways. Complete with historic rally documentation, live your dream in what's now a fast appreciating asset as these cars become recognised as the pioneer vehi
10
enclosed car trailer or toy hauler , trailer is tilt trailer , will suit small sedan, toranas cortina mazda and so on , bikes altered or dragster, measurements in pics , measurement between guards is 1780 mm , back to front of bench 6100, tilt trailer so no need for ramps , trailer can come with new , 3,9 kva gen , new 2 hp comp, ride levellers towing mirrors if price is met , tare weight is 1100kg gvm is 3000kg , so can carry 1900kg if packed right , has front winch , solar panel , 12 volt li
5
Roll Cage
This 72 Camaro is a project I started to build for the Australian Tans Am class. It has been caged and had the floor modified to suit the correct gearbox and where the muffler will sit. It has also had the pedal box master cylinders installed. The only thing missing is the 2 front guards. The car will also come with 2 brand new full quarter panels, a fiberglass bonnet, new race seat, pedal box, race fuel tank and brand new limited slip differential from the US. I have spent $25,000 to date
8
Renault RS275 2015 Renault Megan RS 275 built for track days time attack .Car is for track use only built from a very low 28000 klm car in excellent mechanical and cosmetic condition.Built with all new part .BC coil overs/ 6 point weld in roll cage/ pair is Sparco pro200 seats /Rpm belts /Quick. Change gear shifter/ 18 inch wheels with new federal semi slicks .Car is complete and ready to go has not been raced since completion.selling for less than build cost $15000 lost interest
8
Nissan Silvia S13 reconditioned stage 2 engine. Black top SR20 with S15 turbo. Race seats, fully adjustable suspension, no rust, large sump, large alloy radiator with 2 electric fans. Very tidy race car, comes with heaps of spares, engine, doors, wheels, tyres, etc.
1
" DAKAR " Personalised Number Plate Qld May swap. Would consider American pick up or race car.
10
PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l
7
Roll Cage
For sale, I have been running this car in sprints, hillclimb and the odd track day. New harness and shift lights, jump in and ready to run. Yamaha fj 1200 motor. Located Bendigo Vic can drop at a local depot if you wish to arrange freight.
9
Not sold 100% GENUINE BATHURST RACED ENGINE 1973 block COMPLETE WITH 308 STD BORE BLOCK MINT CON L34 X BLOCK 308 MINT L34 CRANKSHAFT STD GRIND L34 X RODS WILL COME WITH NEW ARP LARGE ROD BOLTS L34 REPCO BATHURST RACE STD PISTONS WITH NEW RINGS L34 BATHURST HEADS WITH NEW SET SPARE VALVES L34 MANIFOLD L34 FLYWHEEL NEW CAM WITH SOLID LIFTERS AND CAM GEAR TO ME THIS IS A VERY RELUCTANT SALE PLEASE NOTE NO NO TIME WASTERS WILL ONLY ANSWER TO CALLS TO MY PHONE ALL ITEMS ARE GENUINE
5
Roll Cage
VY Commodore Drag Ute. Drop an engine setup, ecu and converter in and go racing. Has Coan built T400, Harrop full spool 1000hp rear end, 3" 2 piece chromoly tailshaft, 7 point chromoly cage, chromoly front end, chromoly v6 k frame (can buy LS mounts to suit), wilwood booster delete master cylinder, full fire suppression system, drag bags in the rear, custom built light mags 4" fronts 10" rears, light weight brake rotors and callipers, fibreglass bonnet and doors, perspex front and rear windscree
11
RegisteredLog Book
BMW 328i sedan. 4 doors Automatic 4 airbags 5 speed gearbox 230,000kms. Excellent considering. Drives beautifully, smoothly and quietly.
29
Roll Cage
Reduced from 18,500, now 16,000 1971 Plymouth Duster Roller suit a number of classes, supercharged outlaw, top sportsman, super gas and others. Seamless mild steel tube chassis, funny car driver's style cage (20” at seat base, 18” at shoulder H 38”) will fit 6’1” 181lb driver. Rowe strut disc front with rack & pinion. 4 link, new Koni coil over shocks, new springs, 9” rear end, new SPE 40 spline floater 11/16 drive studs, 5 on 5.5, Wilwood 4 spot disc brake callipers. No center. Simpson 5 poi