117 items under $10,000 for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
8
Tilton 800 series floor mounted pedal box c/w clutch, brake, throttle pedals. Pedal box is complete with 78 series spherical mounted brake master cylinders, and 76 series flange mounted clutch master cylinder. Is mounted to large alloy base and have cover to bolt over top of cylinders Comes with balance bar and adjusting cable Some options available, as have spare new cylinders, braided lines etc. Can discuss what is needed.
5
4 x Porsche Turbo cup wheels, phone Lee on 0419200201 for any information please.
8
2024 Jakoma Trailers car trailer located in Port Kennedy Measurements: 5m total trailer length 2.02m deck width between guards Specs: 2 ton rated trailer 1300kg payload Full galvanized frame Heavy duty Alko jockey wheel Mechanical override brakes 8 tie down points LED light system Ramps included 5x 14x185 tyres on Sunraysia rims Ready for licencing 12 month structural warranty
2
I am looking for a new home in Perth, for our 4WD roller Dyno. I’m hoping to find a race team or workshop who was considering a dyno and have room for it to be set up (approx 8 x 5 mtrs) I will supply the dyno plus all the supporting equipment in exchange for some realestate to set it up under a shared custody arrangement. I am NOT interested in selling it even though this is a for sale ad. I am interested in connecting with people looking at buying or leasing a dyno to discuss this very rare o
7
Registered
Datsun Stanza Automatic Original interior, Original motor, everything original in good condition. Motor starts first go and runs really well. Has club registration so can be test driven anytime. Has some small surface rust spots on the usual place for the age of the car.
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900
9
Enclosed tandem trailer (used for Formula Vee) is no longer needed. Not big enough to carry the two cars together. The floor is aluminium checker plate, all aluminium body and ramps. Trailer has multiple tie down points, jerry can holder, spare wheel/tyre. Great access with 4 doors, rear laydown door, two front doors and a left hand mid section fold down door. The trailer has had new hydraulic brakes fitted and a bearing overhaul in Nov 21. Very few km's since. The trailer is registered and re
10
Dual Axle, Spare Tyre included, Tare 500kgs, 2 Tonne capacity, Hydraulic Brakes, New ALKO Jockey wheel, Ramps included (2m length), x2 Petrol Can Holders, Winch, New 12V ADR approved rear lights, New ADR approved link chain, New white reflectors. Currently towing a BMW E30 (size reference, pictured). - Fully Registered until June 2024 Measurements: - Deck 1.95m wide - 3.2m start of deck to start of beaver tail - 3.95m start of deck to the end of beaver tail. - All service and upgrade document
7
This trailer was built for a lightweight clubman kitcar and was used to carry the kitcar from Perth to Sydney and back. Suitable for a lightweight racecar under 900kg in weight or perhaps dirt bikes or an off road vehicle. Could also be repurposed as a camping trailer or even a food truck. It is fully road registered and way below its replacement cost. It has 3x alloy wheels and high quality Trojan Duratorque independent suspension. Currently has wood composite panels on the sides. Tare weight =
10
Will be rolling for transport More pictures upon request View Torquay VIC Shipping nationwide can be arranged Thanks
3
Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.
7
Registered
Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl
1
Selling a set of K&A Engineering Double up safety stands to suit a Porsche 991 cup car, in excellent condition, like new!
8
2007 built Tandem Car Trailer with front storage box. Light weight ramps (long), lock n load tie down system with spare tie downs/equipment and spare rims. Trailer is in excellent condition, tows well, just paid vic rego (12 months) and has been stored undercover all its life. Only moving it on as I no longer require it and is too good to just sit around and not be used. Happy to negotiate within reason.
10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.
3
Perforated inner tube is top entry, bottom outlet. Small offset. 6" diameter case. 16" long. No spigots, 2 1/2" pipe slides into both ends then welded. $75 wholesale.
4
One only Challenger? alloy wheel. Zero curb rash. VGC. 14 x 7" on 4 3/4" pcd = HQ or Chev.
14
Here's one for the big guys! A Jordan Sparco brand race suit in a rarely available size of 62. This is from 2003 season when the Jordan raced with the Ford Cosworth and sported the classic Benson and Hedges sponsorship. I believe it was used by the jack man and I have included a photo of the team in action during a pit stop. I'd like to think that its my suit in the photo! But who knows. I bought it back in 2006 and used it a few times racing in the Vic State series....now its just hanging
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.