474 items for sale

Genuine Group N Mazda 323 GT-Ae with WRC History Offering a rare opportunity to own a piece of Australian rally history. This is a genuine Group N Mazda 323 GT-Ae, with documented WRC heritage and an impressive competition record: Two-time SA State Rally Champion National Motorkhana Champion (Outright) Multiple other state titles P6 ARC Rally Champion (~1999) Built to compete at the highest level, this car includes exclusive features: One-off Kevlar underbody protection by Rod Millen (as per

Not in a rush to sell. 5 speed manual with the 1MZ-FE V6 engine. MSA/AASA approved rollcage. FIA approved seats and harnesses. Sound deadening removed. Custom switch panel with remote cable. Motorsport gauges including wideband. Fullriver battery. Lightweight wiring harness. Lightened doors. Lexan side windows. Racetech mirrors. ABS, airbags, aircon, heater core, steering lock and various electrics removed. Custom gear shifter. Aluminium sheet boot floor. Lightened boot and bonnet. Bonnet p

LC Torana Sports Sedan, This is a full space frame car that is running a freshly built mid mounted turbocharged, fuel injected (Motec) V6 Buick (Indy Car Engine) that made 750hp on a safe tune, check out the video for more detail on the engine. Behind the engine is an MVE four speed (ex Nascar) and the a nine inch rear end with a Harrop aluminium centre with floating axles. This car has had a massive amount of time and money put into it to get it to its current state, and with only a minimal

EvoX based Hyundai i20 G4 Rally car as driven by Troy Dowel in the Australian Rally Championship in 2022 winning 3 podiums. Holinger 6 speed sequential gearbox with paddle shift. Brand new engine rebuild and turbo, full custom subframes and arms, vertical intercooler and radiator. AP pedal box with Brembo brakes. Car has only competed in 11 rallies and was the most reliable car in the 2022 Australian Rally championship finishing in the top 5 in every round bar 1. Car is like brand new and except

The No.22 Excel is up for Sale! Whether you are a young gun trying to start a career, or you’re just keen on getting out there and having some fun on track, this is the perfect little car to get you started out in Australian motorsport. This car has only run in two 2024 Victorian State events as well as the 2024 National event at Mount Panorama and is fully log booked. The car comes with... - Mick Webb Race Engine - Les Small Gearbox - Weld in Roll Cage - Short Shifter - Supashocks - Race

2.0 Litre SR20 VET engine. Aftermarket inlet manifold and exhaust. Large brakes all around. Large alloy fuel tank in rear seat area with firewall. Well sorted, fast and reliable. Race winning car! Heaps of spares including- Several sets of alloy wheels and tires. Brakes and suspension components. Basic 2 way radio system. Ready to race in any of the upcoming Motor Events Races. Located in Pakenham Upper

Up for sale is one of my Pulsar track cars. Basic rundown of the car: - N14 SSS hatchback - SR20DET from a bluebird turbo (not de+t) - ACL race bearings - 5 speed manual box (not LSD) - Exedy HD clutch - Yellowspeed coilovers all around - N15 SSS front brakes with winmax W5 pads - s14 rear disc upgrade + caliper adapter - N15 lower control arms - Weld in Half cage - RPM harness - Cobra seat - S14 T28 turbo - 555cc injectors - Surge + 044 - FMIC - NISTUNE ecu (tuned to 170fwkw on 11psi on ded

2020 Flat Top Dual Buggy Trailer - Tandem 7.4m x 2.5m deck, 1.8m drawbar - 4490 GVM, Tare 1460 - Rocker Suspension - 2 Ton Alloy Ramps - 130Litre Water tank and Pump - Power System, DCDC Lithium Charger, 100ah AGM Battery - Awnings x 3 - Motop Rooftop Tent - Toolbox - Lighting - 5 x 305 HD Method Race Wheels, 285/70 R18 Nito AT'S - Air over Hydraulic Brakes, Breakaway System - Built for Offroad Use, D045 hitch Just Serviced, Ready to Tow to Finke! Comfortably fits, 2 x CanAm X3 Buggys

Registered as 5 seater motorhome Cummins N14+ 18 speed road ranger Toilet/shower/fridge/split AC 10kva diesel generator

New unused Jessel rockers to suit LS chevrolet. Rocker part No. 840S75. Rocker bar part No STN-SS2130. Rocker ratio 1.75. I ordered the wrong part No, my fault. I will swap for 1.75 Rocker set for an AFR alloy head 23degree valve angle. These cost me $2500 Please make offer near that amount. Dont hesitate to have a conversation.

Please call the number at the bottom of the add, and please dont waste my time with emails and then ignore me. Ford 2.0 Pinto • Custom high comp forged pistons • PEC h beam rods G023E • Cometic head gasket • Head studs • Big valve ported head with match ported inlet that has been dowel pinned • Kent cams GTS4 cam • ACL bearings • Balanced • Sonic tested block • Main studs • Valve springs to suit cam Comes with extractors Comes with 250km old clutch kit and flywheel Comes with EFI Hardware thrott

Hi, ad the title says, I'm after a BMW e46 M3 race car. Improved production, ex targa car, production car etc. If you have one let me know. Thanks

Ford FG/FGX falcon composite / steel body panels. Also have travel bags to suit bumpers, doors, guards, side skirts, roofs, bonnets etc that will suit most car models. Pricing will depend on quantity but as a guide Composite door complete with window- $1400 Composite front guards - $1200 Composite rear 1/4 panels - $1400 Composite front FG/X bumper - $2500 Steel boot lid - $800 Door travel bags - $200 Bumper travel bags - $300 Guard travel bag - $200 Windscreen protector- $150 Other panels an

2004 Mazda RX-8 Formula RX8 race car. Motorsport Australia logbooked and built to national-spec Formula RX8 regulations. Features: • Fekete Fabrications weld-in roll cage • Shockworks suspension • Whiteline sway bars • Front strut brace • Performance brake rotors • Race steering wheel Engine remains largely standard as per category regulations. Included spares: • 2 spare gearboxes (need rebuilding) • 5 spare wheels (1 bent) • 4 new Hankook tyres • Spare front bumper Car has cosmetic damage t

Chassis 1 (of 25) run by March Engineering for Mike Thackwell in 1979 British F3 Championship. Finished 3rd with 5 wins. Winner of Monza Lotteria F3 race. Imported into Australia in 1980 by Russell Norden where it ran as an Arbyen in Gotcha colours. Winner at Sandown in 1981. Sold to Chris Kane, then to Neil Israel. Winner at Sandown 1984. 3rd 1984 Australian Formula 2 Championship. Extensive restoration commenced in 2017 back to 1980 AF2 configuration. All uprights (including spares) crack te

Brand New Ready to drive away, no wait time is this Patriot Fabrications, Custom Triple axled 7.3 meter boxed trailer, with dimensions being, 7300mm Box length, 2495mm overall width, 2280mm internal door width rear, 2250mm Ceiling Height, 2000mm between guards. Stunning Trailers ready in either 3500 GVM, or 4500 GVM both available. Complete with Electric Walkinshaw Jockey Wheel, 2 internal Electric Winch's, Brushed Stainless steel front workbench 600mm deep, 4 Tie down points, Triple Roller roc

EXTERIOR: All panels are straight with zero bog. Its had a complete professional respray INTERIOR -Fibreglass dash -Lithium Battery -Cobra race seat -Sparco seat belts -Short Shifter -Push button start - Fuel/headlight/rainlight switches -Obviously Kill switch and igniton missile switches -Sparco steering wheel -Tig Welded roll cage -Tidied wiring loom for appearence -Current spec window net SUSPENSION (everything is 3 rounds old from new) -Superpro bushes -Supershock dampers -Wheel bearings -C

STIRLING SPORTS CAR MADE IN SYDNEY BY THE LATE STAN BROWN. COPY LOTUS 23B. LOTUS TWIN CAM, HEWLAND BOX.C of D ISSUED 2000. VENDOR PURCHASED THE CAR IN 1985. THE CAR USED SPARINGLY LAST 20 YEARS WHILE THE OWNER RAN AF2 THEN INTERNATIONAL F3. VERY QUICK CAR 1m 49s LAP AT PHILLIP ISLAND. SPARES AVAILABLE INCLUDING RATIOS.

NEW 2025 HNS Enclosed trailer. Internal floor length is 6.5m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.1m 4500kg GVM 1900kg Tare Chassis 150mm x 50mm x 5mm RHS Steel ( 450 Grade RHS) Drawbar 150mm x 50mm x 5mm RHS Steel ( 450 Grade RHS) 4mm Automotive Aluminium Cladding walls, high gloss white 1pc fiberglass roof, waterproof! LED autolamp lights Tri Axel greasable suspension on 50mm solid axels 3" drop axels Break awa

Rogers Engineering & Development offers for sale its entire remaining fleet of S5000 open wheel racecars, together with comprehensive inventory of spare components. Built in Melbourne, Australia by Rogers Engineering & Development - a division of successful Australian racing team Garry Rogers Motorsport (GRM) - S5000 raced between 2019 and 2023 on 22 occasions. The S5000 racecar is a combination of an FIA-homologated monocoque produced by Onroak-Ligier, mated to a thundering 5.2-litre Ford-bas