SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

128 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

9
Registered
Roll Cage
Birkin S3. 2 Litre Ford Zetec engine with Omex ITB's and ECU, fast road cams, vernier cam pulleys, Birkin independent rear suspension, WRX STI Viscous Diff, Ford 5 speed type 9 gearbox. The car has only road kilometers on it, no track time. A very comfortable and totally reliable car. Side Screens and wind wings included. Many spares and parts included with the car, rear wheel carrier, spare wheel, etc. I have all engineering documents and a large history file from when the car was built.

Kelmscott WA, Australia
Share
Watch
5
This car is a stat w/off due to minor water damage, all electrics still operational. Fitted with 6cylinder SDI and 6speed manual. Inside Car has been stripped and being prepared to for circuit sprint events with race seat, 6 point harness, lowered onto SSL suspension, OTR, upgraded brake pads. Can run as is or fit roll cage plus few other components and car could be run as production car. Due to other commitments need to sell. Ring Wayne 0458723021 $8000.

Gosnells WA, Australia
Share
Watch
4
Registered
Roll Cage
Log Book
Fully optioned RX8 Cup / Production Car / Formula Rx8 Brand new Build log booked and has completed one test day Car is registered in WA Car needs a paint or wrap to make it as nice as my others and price represents this. Car is all the good gear ready to go Rotor motion engine Alternator Pully kit Twin oil cooler kit Large ally Radiator Cup spec intake and exhaust New Engine mounts Update Suspension bushes through out Control McA coil overs Lithium battery New Direct clutch an shifter bu

Greenwood WA, Australia
Share
Watch
7
Roll Cage
Log Book
Fully optioned RX8 Cup / Production Car / Formula Rx8 Brand new Build has completed 3 race meetings in 2023 with fastest RX8 laps in each one. Car is all the good gear ready to go Rotor motion engine Alternator Pully kit Twin oil cooler kit PWR ally Radiator Cup spec intake and exhaust New Engine mounts Update Suspension bushes through out Control McA coil overs Lithium battery New Direct clutch an shifter bush Brand New Ric Shaw Gearbox with modified 4th gear Interior is a national agi cage

Greenwood WA, Australia
Share
Watch
1
Holinger RD6-H gearbox for sale. In excellent used condition. Regularly sreviced/checked by Race Torque Engineering. Last ran at Phillip Island November Island Magic in VN GpA #5. Moving to sequential so genuine reason for sale. Being removed from car in two weeks. Comes with input shaft and gearstick.

Perth WA, Australia
Share
Watch
11
Roll Cage
2007 Renault Megane R26 127,XXX km's Engine is stock apart from the exhaust modifications. All mods listed below are near new, or new. Fully race ready, an amazing track/tarmac competitor. I'm looking to sell so as to move onto another project, otherwise I would keep this eccentric machine. It runs great and looks amazing - with special attention to fit, finish and attention to detail, this is not just a race pig. It smashes the track whilst looking the part. Mods: BC Racing coilovers <150km

South Guildford WA, Australia
Share
Watch
11
Roll Cage
Log Book
2007 Mazda RX8 I'll pay $2k towards transport to the East Coast New Build by Marcus La Delle 99 Motorsport October 2022 Only 6 race meets old Red at some point, Now wrapped All Category Controlled Components for RX8 Cup Rotomotion Brand new Built & Tagged Engine, run in, Not raced yet Eligible for 3E Series Production National AGI Cage Cobra Monaco adjustable seat 6 point in date harness to 2027 MCA Coilovers Twi

Perth WA, Australia
Share
Watch
7
Registered
Birkin S3 Clubman built in WA in 2008. WA registered for road use. 2 Litre Zetec with ITB's and cams, IRS, WRX Diff, type 9 'box, regularly maintained, timing belt replaced recently, new battery. Comes with engineering docs, build sheets, manuals and a large history file. Quaife straight cut box also available. It is a Birkin clubman not a caterham westfield PRB or lotus. Best to call me on 0403333667 for a quick response.

South Perth WA, Australia
Share
Watch
10
Registered
Austin A40 Farina was built and used for Classic Rallying in the 90s by the present owner.The car was then put into storage in 2001due to other projects but was completely stripped, repainted,rebuilt and recommissioned 3 years ago and has had little use since. Currently on WA Club rego but can be transferred to full licence if used in WA. The car has a fresh 1098cc A-series engine with an LG 295 cylinder head , twin S.U. Carbs with boot mounted electric fuel pump and pressure regulator,extracto

Kingsley WA, Australia
Share
Watch
4
New caliper brackets for Commodore VB-VS to suit Nissan R32 type Sumitomo 4 spot calipers. May suit other caliper types. Used for VT brake disc conversions running 296mm x 28mm discs. Laser cut zinc plated steel brackets complete with spacer and bolts,and new shorter banjo bolts. Made by M Larner. Can be used with standard brake hoses, kit is supplied with banjo bolts to suit a Nissan caliper. Conversion for Commodores VB-VS running VT rotors, may suit other models. Brackets only, last 2

Perth WA, Australia
Share
Watch
5
Roll Cage
Race Car. 3.6L V6 fully prepared BEERS race car (Lemon Racing). MA and AASA approved bolt in AGI roll cage. Coil over race suspension. Race seat and harness. VE SS brakes with endurance pads. In excellent condition. Last 2 events 5th and 7th from 30 cars. Ready to race as is. Could do LS conversion for production car racing.

Bunbury WA, Australia
Share
Watch
5
Registered
The kit is a MEV SONIC 7 Built in 2018 11 *** km’s 210 HP De-tuned. Can be tuned to over 300 HP Space frame designed in WA to meet the rules and regulations for Australia. Fibre glass is imported from England Engine is from a 2006 Ford Focus Duratec 2.0L – only done 3000km’s at time of build Ford Focus Gearbox 5 Speed drive shaft Front Brakes are from a Mazda RX7 FD Rear Brakes are from a 2006 Ford Focus disc and calipers with standard mechanical handbrake actuation Subaru master cylinders brak

Kenwick WA, Australia
Share
Watch
5
Roll Cage
Log Book
Developed in Italy as a training car particularly for those with F1 aspirations - https://www.asmonzaracing.com/photos-cars-walkaround-abarth-se025-formula-italia-1972-1979.html Engine is a 1608cc twin cam from the Fiat 124S, the five-speed gearbox from the Lancia Fulvia HF 1600 with an Abarth LSD. The car was imported into Aust in 2012, and ran at various events at Northam, Albany and Wanneroo. Immediately prior to import, the car was run at the Vernasca Silver Flag event and Abarth Tra

Perth WA, Australia
Share
Watch
7
Radial SR8 RX with RPE 3.0 litre Engine producing 453 bhp and 261 NM torque. Engine NEW in 2020 (3.0) Fully rebuilt Gearbox with all new gears in 2020 Complete ground up overhaul in 2022 as the Car have not been used since Covid .Now fully race ready . Maintained to the highest level by full time Race mechanic . Hispec 6-pot front brakes calipers with 310 mm rotors. Extra cooling Features and alternator cooling system. 3 sets of wheels lots of new and good condition parts. Car come Race

Scarborough WA, Australia
Share
Watch
10
2000 Hyundai Excel Race Car for sale Proven front running car, 2nd in the WA State Championship This car has been built to the highest standards using the best available parts you can get your hands on. Full Martin spec engine - this is the best engine I've ever seen on the dyno (107HP) sealed with paperwork and new sensors Mocal oil cooler, braided lines & SE Motorsport sandwich plate ERA exhaust Current Spec Supashocks SE Bush Kit Aim Solo DL Digital Gauges - Fuel, oil temp, oil pressure an

Success WA, Australia
Share
Watch
20
Registered
Roll Cage
Owner has purchased new car, and it’s time for a new owner of this beauty. 2 x Targa class Optional extras to buy: Brand new spare built forged motor, brand new spare built PPG gearbox, 2 spare turbos and heaps of other spares. This car is set up exceptionally well, very balanced and handles great, is current targa legal and going off the recommendations made to MA, will be one of the best packages for Targa/Tarmac Rally. It is easily one of the most versatile cars that can do circuit, ta

Perth WA, Australia
Share
Watch
8
Registered
Log Book
Brand new just run in with 1200kms on them 500kw rated Deshele stage 3 engine and ORC twin plate clutch, currently tuned 325kw and 640nm 22psi. Process west front mount, twin pump surge tank , oil cooler.TVG deletes, 1300id injectors, CSF radiator radium fuel rails, killer B sump baffel and windage tray, MCA red coilvovers, white line 24mm sway bar, braded brake lines, new DBA hp pads high temp brake fluid. Catch can and more. Built the car to do track days but im not going to use it.

Mount Hawthorn WA, Australia
Share
Watch
9
Registered
Roll Cage
Birkin S3 2004 Toyota 4AGE Blacktop 1600cc with Silvertop cam belt assembly and ST rods Motec M4 ECU Ford Type 9, 5 speed gearbox, standard ratios Borg Warner M68 diff with LSD, 3.9:1 Toyo R888R rubber on 15" wheels (bought 2015!) AVO coilovers Built 2004 by Damian Wheeler in SA. Car now resides in WA with full rego (expires May 2024) Bought in Jan 2009 with about 35k kms on the odo. Current odo reading is about 106k kms Reasonably regular competitor in sprints, motorkhanas and regularity. Plen

Success WA, Australia
Share
Watch
15
HIGH SPEC GRAVEL RALLY CAR, NEW MAXIMUM 207 SHORT MOTOR, RECON HEADS, ASSEMBLED & TUNED BY RACE TORQUE, WITH NEW VF53 TWIN SCROLL TURBO, MOTEC ECU, ALL UNDER 200KM. MCA GOLD REMOAT CANISTER SUSPENSION. GROUP N AP FRONT & REAR ROTORS & CALIPERS, TWIN MASTER CYLINDER BIAS BRAKE SYSTEM,HYDRAULIC HAND BRAKE. MAPPED CENTOR DIFF CONTROLLER, FRONT & REAR CUSCO DIFFS, 6 SPEED WITH NEW HD ORGANIC CLUTCH, ALL 180 STI, NEW DRIVE SHAFTS. TWIN FUEL PUMP SET UP WITH SURGE TANK. 8 POINT WELD IN ROLL CAGE. WING

Lesmurdie WA, Australia
Share
Watch
9
Roll Cage
Log Book
Cams Logbook Run PCR or Tarmac rally rules. New seat belts. Stilo intercom.Motec M4. Ready for next Targa event.

Western Australia, Australia
Share
Watch