Holden Race 355 stroker. 600 plus hp. VT roller block. Custom ATM carburettor. Lots of work done on heads. Huge flow. Titanium nascar valves.Savy dry sump. Huge list of build mods available on request.
As new RF-7W carbon Helmet ,size 59 , I bought this great looking Helmet, new for the 2022 Phillip Island classic and it doesn't suit my application. I used it for 4 laps. Cost $1430 new. Selling so I can purchase suitable Helmet $1200 + Postage
Brand new Samsonas Motorsport dogbox. 6-speed H-pattern with aluminium case. Never used or fitted - still has "No oil" tag on it. Comes with: - Bellhousing to suit many 6-cylinder BMW engines - Samsonas shifter - Motorsport Systems shiftcut gear knob - Input shaft to suit BMW S54 Was bought for a race E46 M3 but plans changed. Available immediately in Gisborne, Victoria - can deliver to Melbourne and surrounds within reason. Can possibly get to Sydney with a friend by December 12.
Fully fresh Chev engine with 0 laps, Brodix 12 degree heads with clements CNC ports, h/d Bowtie block, Callies l/w crank, new Oliver rods, JE pistons, MSD, Jesel timing belt, w/pump etc, suit dry sump setup. Genuine 680hp.
Brand New - Never Used or Fitted Porsche Cup 911/991 Suspension Riger Suspension - The latest version with roll control. Comes with set up sheet to assist with installation
Locally designed and manufactured 8 stack Billet Manifold to suit Ford Coyote Engine. Features a EFI Hardware race tested DBW motor, connects to OEM plugs & works with factory ECU Manifold will be supplied as shown in the photos, ready to be fit to your engine. Package will include all required O'rings, bolts, etc for proper fitment. NOTE: Manifolds are currently being manufactured, due for shipment by Mid-December. Can ship Australia wide or internationally. Shipping with incur an additiona
Fresh Ford V8 Supercar Engine 1 hour running time on the dyno since professional rebuild Ex Steven Ellery Racing. engine block is stamped SER03 CNC Lightened SVO Block C3 Heads Billet Supercar Intake manifold Many new components including Pistons, Rings, DLC Coated pins, Bearings, Camshaft, Lifters, Titanium Valves, Dry Sump pump, Pushrods, Flywheel, Clutch, Injectors, and many more new items. Freshened heads In a car at the moment, can hear running. Detailed information will be provided upon
EX WGR SUPER V8 2001 RACE MOTOR BLOCK BRONZE LIFTER BUSHES NEW JE 4.030 PISTONS,RINGS'PINS,ROLLER LIFTERS,CAM,JESEL CAM BELTS PULLIES,4XBOLT MAIN CAPS,NEW DRYSUMP,FITTINGS,HOSE,PUMP,FLYWHEEL,BALANCER,JESEL ROCKERS,NEW LP MANIFOLD,PUSH RODS HEADS ARE BEAR BUT HAS NEW VALVES ONLYROCKER COVERS,DIZY,WATER PUMP,NEW BIGEND AND MAIN BEARINGS, THIS IS A ALL SUPER V8 PARTS ENGINE. VERY LITTLE PARTS NEEDED TO COMPLETE. ALSO HAVE 2 NASCAR SBC BILLET 350 CRANKS $1,000 EACH AND HOLDEN 308 BILLET
Racepak Full Setup I bought in all these items for my drag car, but didn't end up fitting them, due to selling the car. This amount of equipment is sufficient to fully setup your car to competition level! All items listed below are the most currently available parts and have never seen a car! Over $10,000 worth of equipment. INCLUDES: IQ3 Drag Logger Dash, Features: Channels: 12 Total - 6 V-Net digital/analog - 6 internal Sample Rate: V-Net records data up to 100 frames per second Memor
Brandnew Longacre corner weight scales model 72593 with 15'' pads with 1500 pounds per pad $2850.00, These are brandnew in the original Longacre packaging . other Longacre products available.
Group A VL Walkinshaw Genuine Twin Throttle Body Intake Mainfold and genuine rocker covers to suit. In excellent condition (taken off near new engine, over 30 years ago). Genuine, original idle control, fittings and hoses. Genuine, mint condition rocker covers (polished). Taken off my own personal group A engine in 1990 and has been owned and stored by myself for over 30 years. Has not been tampered with or ported, in its original state. Still has original thermostat, housing and sensors a
Super T10 close ratio gearbox. Near new Richmond alloy case Super T10 upgraded by Modena Engineering with a straight cut dog engagement gearset, new input shaft and rollerised main shaft. Ratios are 1st: 2.43:1 2nd: 1.61:1 3rd: 1.23:1 4th: 1:1. Input shaft 26 spline; main shaft 32 spline. Only 700km use in a 450hp car. $6,250
Midget engine freshly rebuilt and has dyno work only. Ford SC1 cylinder head on a Fontana bottom end. When engine was pulled apart for rebuild we saw where improvements could be made, with piston design and a few other little things, this design change resulted in 15 more rear wheel horse power - with more to find if you want to fine tune ignition curves, I was only after numbers to show it is not a lemon. Happy to share these results with an interested buyer. - This price is for the engine co
Billet Rb engine Rb26 billet block Nitto 75.7 “2.7” crank Nitto extreme I beam rod with age625 bolts 86.1mm bore Sps custom 17 cc piston fly cut for variable inlet camshaft Can come with 7.25 tilton clutch and chrome moly lightweight flywheel, pro series prp lower trigger and 1000 hp ati balancer for extra negotiated price Has been taken out of national level sports sedan r32 for upgrade. Well used, so being sold at a really good discount from new cost ~37k *note - engine in picture is
364ci Chev motor, 690hp/700hp, dash12/12degrees Brodix heads, Wanye Randall built, titanium valves, JE Pistons, 3.48 stroke, Kellys crank. Great motor, fresh ready to race, all the best parts
Awning for transporter - Tarp PVC Cover - Awning - Truck cover - Outdoor entertainment cover - Farm stock or Produce cover … many possible uses : GAINT SIZE 8.2 x 11.4 mts - heavy duty PVC with sewn edges has stainless steel eyelets plus sewn reinforced corners - has reinforced centre support panels for poles to hold up middle section of needed - Only used a few times Stored indoors out of sun - Condition is like NEW …. REPLACEMENT COST IS OVER $4000 plus gst
Motec products: Motec C125 dash Amp connector, Page buttons and data cable etc. purchased brand new last year and never used, $2400 ono ****SOLD**** Motec M800 ECU came out of the Toyota Corolla Sportivo Group NP rally car running a 3SGTE fully enabled ECU, even have the wiring harness if that is of interest. $1800ono ****SOLD**** Motec ADL Dash also from the Group NP rally car, have autosport connnector etc. $500ono All enquiries welcome Contact Jimmy: PH: 0421128272
Better than a complete engine as you can see exactly what you are buying, and then have your own engine builder re-assemble it! This is the silky smooth, 3.2L inline 6 cylinder from the updated E36 M3. The engine is apart but all parts are included. The engine was lifted complete from a 1997 M3 with 170xxx on the clock. It was torn down, and all work done so far, by an engine builder. Head has been stripped and cleaned. Block still has crank and pistons in it and has not been touched. Engine c
Camera is wide angle (can be changed) mini camera suitable for car or bike. All connection cables included but not shown in photos Various mounting methods both suction and fixed mounts included. OBD 11 automotive cable connector Both Camera + Smarty cam screens still have protective plastic screens attached All AIM software free off internet including updates which allows data collection and analysis. Data overlayed on film can be changed and positioning on screen via software Track film down
This engine started life as an 450hp ford racing crate engine. It was rebuilt by Westend Performance and now has 535hp @6900rpm. It retains its BOSS 4 bolt block forged, steel cap screw connecting rods, forged steel crankshaft and now has .30 forged srp pistons with 11.3 comp. -Ford Racing aluminium Z heads now with howards dual v springs, Manley retainers and cup sets, Crower roller rockers, Lunati push rods. -Comp cams XR286 mechanical roller and comp cams endure X solid roller lifter set (reb