31 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
2
DSSV Damping Technology shocks Originally from a SCCA title wining Prototype D Sports Racer. Used for testing and one 13 lap race.
3
Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.
7
Registered
Peugeot 207 GTI 1.6L Turbo engine ** Car is still road registered Forge intake Gaz Coilovers with adjustable dampening and adjustable rear springs Car has had the ecu sent away for a re-map in the UK Aftermarket fender flares done with nutserts so they are removable. Full custom 2.5” exhaust Velo 330mm alcantara steering wheel Near new AR-1s Car has Rallysafe already installed ready to go Brand new Sparco racing seats Near new velo 6 point harness setup Battery relocated Near new upgraded sl
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.
3
Roll CageLog Book
1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.
6
RegisteredRoll CageLog Book
Subaru WRX tarmac rally car. Well sorted quick car ready for the Adelaide rally. Fully welded roll cage to the higest standard with log book. Fully rebuild engine with all upgraded internals. 6 Enkie wheels with Toyo R888 tyres. Coilovers and upgraded brakes with full floating forza rotors. Cusco LSD Rally safe kit fitted. Too many things to list. Car has all books and history. Will be sold with rego. Call or text Simon on 0413580549
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.
3
RegisteredRoll Cage
Selling my pride & joy Citroen C4 VTS. *Price is negotiable. I always loved the C4 WRC car and this was as close as I could get to owning one. I no longer have the space to keep it and have another project underway. I have spent hundreds of hours over the last 5 years working on this car, it feels like I’m selling a part of me. If you want to go tarmac rallying or hill climbing this is a perfect platform to get a trophy for the under 2000cc class. I have prepared this vehicle to run in the Ch
19
Roll CageLog Book
Targa Tarmac Rally car; built by Walkinshaw Performance for Renault Australia for Targa, mostly recently looked after by TMR. Ready to race package compliant to current Australian Tarmac Rally (ATR/AASA) regulations, comes with tons of spare parts. Surprisingly capable and well handling package; recently came 2nd in ATR Super Rally class. Genuine reasons for sale (surplus to requirements - have another Tarmac Rally car). Will also suit buyer looking for a track car. * Only 22000km * MA/CAMS
8
Chev 350 brodix heads stage 10 and match ported victor junior manifold. Flowed by Bill Hanson 800 hp with brand new stainless steel valves lapped in ready to go, just needs springs and rockers $2,300 ono . Also circlematic kit for powerglide trans new $600 ono.
12
Roll CageLog Book
RHD 2011 997.2 GT3 cup car built into tarmac rally car, Right hand drive converted with all genuine Porsche items, low hour modified 3.8 with 340KW at the wheels, modified cams and springs, RSR style headers, low hours on Holinger sequential, new extreme twin plate clutch built for tarmac rally use, ITB conversion, motec M600, new Velo Apex FIA seats, new Velo harnesses, Hydraulic handbrake, big modified steering lock, CSF radiator upgrades with cooling fans, fresh brakes, EXE-TC dampers built
18
'98 Excel Rally Car. Great Entry Level car. Near new tyres that have done one Rally. Spare set of wheels and tyres. New Rally Safe Wiring, New Terra Trip intercom, Shift Light, New Velo Harnesses, OMP seats, Carbon Fibre Navigator foot rest, Brantz 2 Trip Meter, Helmet Net. Motor and Gearbox are strong, new power steering rack, Aluminium bash plate, King Springs, new pads all round, new windscreen, Led Headlight globes and Fantastic Lightbar. Vehicle is Wrapped as per pics. Road Registered. Spar
1
Brand New Unused still in original packaging IV-IX Sequential Gearbox Strong from Shift Gearboxes only delivered 2 weeks ago. For all information see: https://www.xshiftgearboxes.com/race-gearboxes/mitsubishi/mitsubishi-sequential-gearbox-evo-4-9-x-5-speed-strong
9
Bought new in 2005 bare, built for 2006 used for 1 year , have been on the shelf ready to go excellent condition ring Mark 0427930612
9
2004 206 gti 180. Car has been stripped ready to be converted into a race car. All interior parts come with the car. Body work is straight and not long been painted satin black. Car has a clean title with sa plates. Also with the car comes a second 206 gti 180. Ex autocross car. Body work is rough but does have a cams approved speed roll cage. Rear is built to rally spec. Only needs a few more front bars to be a full rally cage. Head is off the engine. Suspected blown gasket. U.K built BE ge
3
SSR GT1 19inch wheels are a brand new set of 4 in original boxes and never fitted on a vehicle, they are made in Japan and a premium quaility product. Come with hub centres and new wheel nuts to suit Nissan vehicles. Took 5 months to be delivered from ordering, cancelled Nissan Z project forced sale. Invoice available proving purchase of $2250 from a Autotechnic and genuine SSR wheels. Staggered set are 19x9 1/2 pos 35 and 19 x 10 1/2 pos 22 PCD 5X 114.3. Suited to many vehicles with 5x114.3 pcd
8
Brand new, never fitted. Changed direction with my build so surplus to requirements. Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S550 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 1⁄2-inch DOM tubing, BMR’s K-members give you a lightweight, extremely strong K-member. Ever