312 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
1
Brand new Albins ST6 6 speed with paddle shift. Front bell housing for clutch. Same as Marc car setup.
7
RegisteredRoll CageLog Book
IMPORTED BY MITSUBISHI MOTORSPORT FULL QLD REGO - CAMS LOGBOOK ONLY 24 000KM ON CHASIS 2018 TARGA TASMANIA - 2nd Class / 5th Outright Rookie Engine rebuilt less than 10 000 km ago by previous owner ( 210kw @ wheels on 98 tune ) Currently on factory Evo 8 turbo - Fuel sampler fitted to fuel line Motec ECU ( Launch Control & 2 stage Anti-Lag activated ) Proflex ball bearing cannister shocks & Adjustable Coil overs ( Eibach springs 2 sets ) Full Welded Bond Chrome Molly cage Gearbox recently fu
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
3
I have 19 available $40 each which is less the half price can post Australia wide
2
Porsche 996 997 Centre lock wheel travel nuts Can post Australia wide for $20
8
Sr20de fully rebuilt. Custom made pistons for 14:1 compression, h beam rods, big crow cams, golbys adjustable cam gears, gtir intake manifold. Block was cleaned, decked and machined. Crank shaft was machined and balanced. Light weigh under drive harmonic balancer. Head was cleaned tested machined and ported. Comes with brand new clutch kit with a light flywheel. Engine is ready to bolt in and run.
15
Roll CageLog Book
EVO7RS - Les Walkden built factory RS, Car No. L12. Ex Ed Ordynski car, CAMS Log booked, Chromoly welded cage, Freshly rebuilt Evo 9 Mivec motor to Targa spec, 250awkw, near new Owen Developments turbo, Motec ECU with anti lag, New MCA Gold suspension, freshly rebuilt RS gearbox, Coralba rally computer, heated front screen, quick release RaceTech wheel, near new oil cooler and radiator, Evo 9 front bumper and rear diffuser, new belts, new fire extinguisher plus fire bomb, 2 sets of OZ light weig
13
Our Latest Generation Load Cell Simulator Kit for PE Racing Billet Pedal Assembly Designed & developed to feel realistic, and handle real life pedal forces. PE Racing Load Cell Sim Racing Kit is designed for professional Motorsport Simulators & gaming. Designed to suit the Patented PE Racing Billet Pedal Box. Driving Simulators typically see more laps than real race cars, and thus these sim cylinders must withstand the same forces with increased cyclic loads. We have designed & developed thes
6
Type 9 Quaife Close Ratio Straight Cut Gearbox. Suit clubman of modified Escort. Never fitted to the car, went for a sequential 5 speed. All new bearings/gaskets and seals I think the Ratio: 2.2/1.69/1.21/1:1/0.873500
3
This is a 1970's flat track bike with an OSSA Stilleto TT engine (also refereed to as a Dick Mann TT engine), these motors were produced for American Junior Class Flat Track with around 36 hp, I have had this bike for many years, unfortunately at 70 something I am not brave enought to race this rocket. I was told by the person who sold me the bike that the frame was a copy of an Alstar, but I cannot confirm this. Some years ago I removed the front brake and changed the rear manual disc caliper w
3
In very good condition located in Adelaide ideal for single seater period correct 50’s to 60’s or 70’s car.
11
Pedal Sliders Designed & Manufactured in Australia by PE Racing These are specifically designed to suit our PE Racing Pedal Assemblies and cater for the FIA fixed seat regulations. A little about our Pedal Assembly. This PE Racing Patented Frame design came about as a result of common problems experienced while installing pedal assemblies to a range of race cars over many years. Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forces ultima
4
350 Fuel Injected Chev Engine, built as a project, only dyno time. Never installed to a car. 600BHP @7000. Autronic ECU & Harness, Miloden wet sump . SHP Dart 4 Bolt Block. Crower Crank. New parts include, NC'd Brodix Heads (1188106), stainless valves, Jessel Shaft Rockers, Brodix manifold (HV1814), CP Pistons & pins, Oliver 6" Rods, Isky roller cam 294: 302: 108. MSD dual Ignition 9:1 Comp ratio, tuned & mapped on 98 unleaded fuel. Very smooth & progressive. Ready to install. Ideal f
10
Load Spreading Washers - with 12mm locating shoulder to underside. How often do you find the panels you mount end up with the holes flogged out? Simple but effective, we designed this washer with a locating shoulder on the underside. This provides better lateral support for the connection. It reduces the bearing load by increasing the connection hole surface area. This results in less movement & reduced wear. Manufactured of Aircraft alloy in a range of sizes to suit M5, M6 & M8 counters
4
Complete set of original Porsche 997.2 S4 wheels and tires approx. 40% worn As new with no scrapes or blemishes. Fronts 19X8 235X35X19 Perilli "P" Zero Rears 19X11 305X30X19 Perilli "P" Zero
10
PE-Clamps are a quick & easy solution to mounting panels, cables, plumbing or accessories securely to common tube and roll cage sizes; eliminating the need for welding. PE clamps come in four different styles and a variety of sizes to satisfy a wide range of tube mounting needs. The images show a small example of potential uses. We have Engineered these to withstand a 10G dynamic load of 5 kg (equivalent to a static load of 50 kg) per clamp. The clamps have an optional vibration insulator th
6
ADL2 Motec Dash Good Working Condition Supplied with new harness and connector as supplied by Motec QLD Also supplied with pinout sheet Brisbane
10
Designed for the Driver, NOT LIKE ANY OTHER FLOOR MOUNT PEDALS. This Patented Frame Design includes; Adjustable Mounting Feet, Fits easy to a variety of floor shapes. Adjustable Pedals Faces and, Adjustable Throttle geometry. High Quality, Reliable, Light, Strong & Fully Adjustable. This advert is for 2 Pedal Billet Frame Kit only for $1224 Aud (excl GST). 3 Pedal Billet Frame Kit is also available for $1673 Aud (excl GST). The Billet 2 & 3 Pedal Frame Assemblies come with, Levers, Ped
10
PE Racing offers you lightweight, reliable & high-performance Racing Pedal assemblies with Patented adjustable features to suit your driving style & increase performance. Designed for the Driver, NOT LIKE ANY OTHER FLOOR MOUNT PEDALS. This PE Racing Patented design came about as a result of common problems experienced while installing pedal assemblies to a range of racecars over many years. Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forc
5
Four x 45DCOE Weber carburettors on a Bolling Cross Flow Manifold linkages. Limited use. Very good condition.