347 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
9
RegisteredRoll Cage
Thank you for looking at this lovely & very rare example of the Westfield Seight available here in QLD fully road registered with RWC and fresh from a detailed and thorough re- commission, showing just 21k kms in its 25 year life with matching numbers and original VIN. Why am I selling? – because I just couldn’t resist the opportunity to buy it, BUT have at least one too many projects on the go so after countless daily hours of work, shakedown and detailed attention it’s time for it to move on t
10
USA factory built 20' Haulmark enclosed race car hauler. Pit pal storage, vinyl curtain, 240V a/c, tool box, work bench, cabinets, warn winch with hand controller, all new insulation, front stone guard, smooth interior walls / ceiling with 1/2 carpet walls. 83" / 2100 between inside guards, 6'6" / 1981 height, and 17 feet / 5182 inside length. Trailer is: 5800 long, 2550 wide, 2270 high, 850 drawbar, 1950 high x 2350 wide rear door Not a home made cheap trailer. Queensland rego 2025. Dennis
8
A fully optioned Ford F250 Black Widow 2022 Travelled only 9429 Ks Just had 10k Service Top of Range tow ball assemble 37 inch all terrain tires 20 inch SCA wheels power running boards color coded factory bumpers and grill bull bar and heavy duty winch SCA bolt on Fender Flares amber front fender lights FMVSS Compliant just some of Tuff Trucks premium upgrade
6
2020 NEVCO 3500kg ATM dual axle Ezy Approach trailer with Victorian road registration - TARE mass 1560kg, 2000mm wide x 5250mm long rectangular deck, 4500lb 12V electric winch with remote plug-in access and wireless remote. LED work lights and deck lights. Wireless and plug-in remote control for both raise/lower function and winch in and out. In excellent condition - always stored in garage, fully road registered since new, tyre rack rails, front stone guard, triple storage compartments, Nevco’s
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
10
Custom car trailer Length 7.5m Inner guard width 2m Front storage bench Huge belly locker Plenty of tie downs
3
I have 19 available $40 each which is less the half price can post Australia wide
2
Porsche 996 997 Centre lock wheel travel nuts Can post Australia wide for $20
7
This is a single axel box trailer built in 2010 which has been meticulously maintained by the current owner. All up weight as bare trailer is TARE 430kg, comfortably towed by a medium family SUV (Mazda CX5) I have used it to transport my Caterham Superlight to various MSCA Sprint events, track days, hill climbs etc etc. That car is now sold and the purchaser had their own trailer hence the sale of this one. This trailer could be used for anything really; bikes, go karts, formula, open wheel ca
2
Fully enclosed Trailer 7.5m long 2.2m wide 2.6m high Internal 6m long 2.2 m wide 2.1 m high Includes 4 tonne electric winch Also electric winch for back of trailer opening Fully insulated Solar panel Lead light interior Tyre rack Large side awning New tyres n mags New electric brakes and bearings Tare 780kg ATM 2500kg
8
Isuzu FRR550 crew cab 11/02, 6HH1 non turbo, 6 speed ,a/c, p/s, air park brake, Air drivers seat. (Ex SES) Genuine 51000 kms Drives like new Great condition. No reg.
10
I bought this truck as was, It was going to be the new Kumho Motorsport truck. (And my race truck on the side). F$%#kin TCR. It is set up to transport 1 car with a separate Kitchen/workshop area up front. It has room for a medium size sedan with the divider wall in but I have also seen this truck carry V8 Supercars. It is well set up with extender ramps to carry up to a 2500kg sedan. Since purchase, I have spent over $20K bringing it back to A1 spec. This spend included all the mechanical updat
8
Sr20de fully rebuilt. Custom made pistons for 14:1 compression, h beam rods, big crow cams, golbys adjustable cam gears, gtir intake manifold. Block was cleaned, decked and machined. Crank shaft was machined and balanced. Light weigh under drive harmonic balancer. Head was cleaned tested machined and ported. Comes with brand new clutch kit with a light flywheel. Engine is ready to bolt in and run.
8
2012 tandem race car trailer Beaver tail Hidden pull out ramps Electric winch Will come with a new battery Breakaway system Deck is 14ft Total length of trailer and draw bar is 20ft Inside the guards are 1,900mm The total width of the trailer is 8ft Registration until November
7
7.5mt enclosed trailer, used for the last 2 years, has built in storage , 2 winches. Solar, fridge, LEDs and 12v dc systems Needs to be inspected, everything goes with trailer.
5
This car trailer is in near-new condition. Built in October 2021. Used to carry race car. 4.83m long and 2.0m wide at the tray. Wider and longer than usual. Has been stored inside my warehouse when not in use, never outdoors. Has extra shackle loops, manual winch and long ramps. Licensed and ready to use.
3
This is a 1970's flat track bike with an OSSA Stilleto TT engine (also refereed to as a Dick Mann TT engine), these motors were produced for American Junior Class Flat Track with around 36 hp, I have had this bike for many years, unfortunately at 70 something I am not brave enought to race this rocket. I was told by the person who sold me the bike that the frame was a copy of an Alstar, but I cannot confirm this. Some years ago I removed the front brake and changed the rear manual disc caliper w
6
Brand New, 7.3m Box, Tandem axle on Roller Rocker Suspension, 3500kg Axles, 4 Ton Spring set, Electric brakes x 4. Rear Electric Winch for Door, rear door has nice clean lines, with Overhang to roof with downlights for night loading. Polished Alloy trim all round. 1970mm between guards internal, 1600kg empty Tare, with 3500kg GVM. 6 Stud CNC Machined Alloy wheels with Load Rated Tyres 1100kg each. Caravan side entry door. Inspections Welcomed.
3
In very good condition located in Adelaide ideal for single seater period correct 50’s to 60’s or 70’s car.
4
350 Fuel Injected Chev Engine, built as a project, only dyno time. Never installed to a car. 600BHP @7000. Autronic ECU & Harness, Miloden wet sump . SHP Dart 4 Bolt Block. Crower Crank. New parts include, NC'd Brodix Heads (1188106), stainless valves, Jessel Shaft Rockers, Brodix manifold (HV1814), CP Pistons & pins, Oliver 6" Rods, Isky roller cam 294: 302: 108. MSD dual Ignition 9:1 Comp ratio, tuned & mapped on 98 unleaded fuel. Very smooth & progressive. Ready to install. Ideal f