107 items between $10,000 & $20,000 for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
10 1
Tri-Axle Aluminium Flatbed trailer with wire winch. 5.17m long bed and 2,640kg payload capacity, perfect for transporting heavy automotive, machinery and heavy or long pallets with unusual shapes as well as bulk loads. Galvanised steel chassis for durability and longevity. 5.2m long deck, 2,640kg load, 2.1m wide, 55-59cm high, 14° angle. 11.3 sq.m load area – perfect for transporting oversized loads and pallets, unusual shapes as well as automotives. Galvanised steel chassis tandem axle for d
7
This is a single axel box trailer built in 2010 which has been meticulously maintained by the current owner. All up weight as bare trailer is TARE 430kg, comfortably towed by a medium family SUV (Mazda CX5) I have used it to transport my Caterham Superlight to various MSCA Sprint events, track days, hill climbs etc etc. That car is now sold and the purchaser had their own trailer hence the sale of this one. This trailer could be used for anything really; bikes, go karts, formula, open wheel ca
6
This Truck was used to transport a race car. It comes with toolbox and ramps and ramp extensions for low vehicles. The tyres are almost new and serviced it regularly. It is a 3 seater and it’s very reliable. I still have to clean it out. Pan size is 6100 long 2450 wide and 2300 high. Low mileage 398000km.
2
Fully enclosed Trailer 7.5m long 2.2m wide 2.6m high Internal 6m long 2.2 m wide 2.1 m high Includes 4 tonne electric winch Also electric winch for back of trailer opening Fully insulated Solar panel Lead light interior Tyre rack Large side awning New tyres n mags New electric brakes and bearings Tare 780kg ATM 2500kg
10
2000 Jacer V2K Formula Vee. Race prepped and ready to go. Recent engine work, Dyno tuned 76 Hp, a decent competitive engine, a top end refresh could bring more Hp New Clutch, Brake pads. Fresh machined brake rotors, rebuilt shocks. All fluids changed, Current MA Log Book. Spare set of rear trailing arms. Spare nose cone New Dunlop race tyres will be fitted on sale for a QLD buyer. Full paperwork dossier available of money spent and work done. Body work is painted in 2Pac Devil Yellow, but is pro
12
As new condition, always garaged, one owner, low milage. Punched full floor. Hand winch and post. Stone guard. Tyre rack, removable. Drawbar toolbox. 2 x Jerry can holders. Over $5000 below replacement cost
14
Improved production 3J 6cyl, falcon, logbook, has run in vic state series last 2 years, fully sorted car. Doing 2:02 at the island and 1:31 at Sandown, will come with a Windsor, kframe, Bellhousing, ecu and wiring harness plus heaps of spare panels and parts. Located Russell’s bridge vic
7
Developed for the Formula Mirage Category, this Formula Ford 2000 Chassis track car has been used as a training open wheel racer. Engine Details: 2-Litre, DOHC, 4-Valve, Mitsubishi 4G63 engine . The Formula Mirage was a racing class supported by the Japan Automobile Federation and Mitsubishi. This racing class was started in the same year as the more successful Formula Toyota and lasted for six years between 1990 and 1995. The cars Formula Mirage was an open chassis class, open for all manu
4
880kg trailer mass, 2500kg GCM. Internal dimensions: 1970mm wide by 4600mm long Optional stainless steel tire rack with capacity to hold a full set of spare wheels and tires included. Optional 1200mm high stainless steel stone guard included. Quality Respray by PBS Specialty Coatings Fully sand blasted, undercoated with Macro680, top coated with DULUX TB510 in Gun Metal Kinetic Pearl Winch included Trailer is located near Toowoomba QLD. Selling temporarily at reduced price. First to see
5
FOR SALE: Front Running Hyundai Excel Racecar - $20,500 ONO We're offering this professionally built Hyundai Excel Racecar whether you're a seasoned racer or a beginner built to the high standard, turn the key and go. Key Features: - AGI National bolt in roll gage - Fully logbook and rebuilt engine sealed by ACT Autoworks only done 3 races since rebuilt - Racetech circuit seat - Custom Airbox Setup - Quick release steering wheel - Alloy floor plate - Short shifter - Race built gearbox
6
******* DEPOSIT TAKEN ******* This car trailer has a drop-down tailgate, large opening hatches on each side, and an access door. There is a shelf/workbench inside, with a wheel rack underneath. A 60Ah battery is fitted with a DC-DC charger fed from an Anderson plug on the drawbar. The battery feeds an internal light and the breakaway system. The wheels are fitted with bearing buddys to make regular greasing of the wheel bearings easier. There are 10 internal tie-down points. A spare wheel is inc
2
Roll Cage
Excel race car. 4 door, Be Different. Full AGI cage with footwell protection, MCA suspension, race exhaust, short shifter, floor tray. 15x7 wheels 2 sets of wheels and new set of federals. Great car to start in and develop as you go along or perfect for budget enduros etc.
23
2013 Tandem axle custom built trailer by owner - $12,000 2 tonne GMV electric brakes on front axle hand winch 240V plus 12V 100 watt solar system with 100 amp hour battery television and aerial reverse cycle air conditioner packed with race car parts gas bottle mount rear ramps fire extinguisher and signs, fire blanket - CAMS pit bay approved 4.5kg power inverter solar lights spare tyre/jack/wheel chocks tool cabinet Fox wing awning and pull out awning jerry can holder Inside measurement - lengt
19
Tilta Trailer with some extensive modifications and factory extras. Super light trailer and tows like a dream! Will list details below: -2016 Tilta Trailer -Just been freshly serviced with brand new Timken bearings and new magnets for electric brakes all 6 tyres have been replaced in the past year. Factory options: -Wider tracks which makes loading a lot easier than the skinny ones they come with -2 x spare wheel carriers -2x Jerry Can Holders 1 not installed -Draw Bar Tool Box -Massive Belly
8
THIS CAR IS BASED IN THE UK. I am offering for sale this just completed full size F1 type show car. The car is in primmer, ready for final prep and paint or wrapping. The price is £14,000 (pounds Stirling) no VAT The body is mainly fibre-glass, the wheels are bearing mounted, the tyres are genuine race used Pirellis, and there is a steering rack to give parallel movement to the front wheels for steering. The cockpit is big enough for most people to fit in. Please note that this is a show car wi
7
Roll CageLog Book
IPRAVIC number 58 logged booked race car fitted with g13g Ivan Tighe 1044 cams efi hardware throttle bodies haltech elite 550 honda d16 pistons modified close ratio gearbox with locked diff 6x14 wheels and spare set with Yokokhama A050 tyres 2 15x6.5 with tyres some spare panels could covert to 2lt sports sedan ,race weight with 75 kg driver 760 kgs 108 hp at wheels race fuels 102
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
7
Enclosed trailer in excellent condition. Rego Jan 25,new heavy duty tyres, Leds , 2 lockable side doors,Tyre racks . Overall lenght is 6270m,tow point to front is 1400.Int width 1940,height 1360,width 1940,tyres 260 per side.Contact for more information.
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
5
Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW More pictures to come $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185