74 items for sale

7.5mt enclosed trailer, used for the last 2 years, has built in storage , 2 winches. Solar, fridge, LEDs and 12v dc systems Needs to be inspected, everything goes with trailer.

KRB car trailer custom built May 2023 to suit Porsche, BMW or any other low profile and wide race/sports cars. Fully galvanized construction with one-piece fibreglass roof, and Alupanel walls, very little use and in new condition with the following features: WEIGHTS Tare mass 1,700kg ATM 3,500kg MEASUREMNETS Total Length 9m (includes drawbar) Internal Length 7.6m Total Height 2.420m Internal Height 1.920m Total Width 2.46m Internal Width 2.4m Width between wheel arch 2.020m GENERAL FEATURES

2013 Tandem axle custom built trailer by owner - $12,000 2 tonne GMV electric brakes on front axle hand winch 240V plus 12V 100 watt solar system with 100 amp hour battery television and aerial reverse cycle air conditioner packed with race car parts gas bottle mount rear ramps fire extinguisher and signs, fire blanket - CAMS pit bay approved 4.5kg power inverter solar lights spare tyre/jack/wheel chocks tool cabinet Fox wing awning and pull out awning jerry can holder Inside measurement - lengt

Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel

Professionally built in 2019 using genuine STYROMAX insulated composite panels and extrusions. Dimensions: 8.1mL x 2.4mHx2.45mW. Internal - 6.9mLX1.93mHx2.39mW Clear floor length is 5.6m and between wheel arches is 1.965m. *3.5Tonne rated and tared at 1320kg, now 1600kg tare with interior fitout. *4 wheel electric brakes and breakaway, parallel bearings and load rated wheels and tyres. *Side door and lift up rear tailgate with full length stainless piano hinges, 2 opening windows with both scree

2024 Jakoma Trailers enclosed trailer located in Port Kennedy Measurements: from 5m long 2.45m width Standard Features: Lightweight insulated construction Internal dimensions 2.2m H x 2.4m W Roller rocker suspension 30mm fibreglass panels Led lights inside and out Dual purpose side door Full door rear ramp 2.1m H x 2.2m W 5x Standard 14x185 tyres on Sunraysia rims 3 to 3.5 ton models as standard, 4.5 ton available on request Electric brakes standard, 10 or 12-inch brakes as suited to model Hea

Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000

This is arguably the best Race Car Hauler in the Country. We had it built by Allstar METAL Fab and fitted out by the Caravan Repair Centre at Caloundra, who did an amazing job, their work is faultless. We had intended to travel around Australia with the Race Car in the back to race all the tracks in the country, unfortunately our plans changed and we are now heading of overseas for a period and we don't want this siting around any longer, as we still haven't used it yet. Has all the creature com

NEW PRICE NEW PRICE - GREAT TRAILER FOR BIKES, ATV's, GO CARTS, OR CAN AM MAVERICK TRAIL DPS ETC, UPDATED PHOTOS - 12ft fully enclosed black edition trailer, dual axle, MADE IN USA, Blackhawk Edition SPEC, Checker plate floor and ramp, Fully lined white walls (powder coated aluminium sheeting), Sea container style side door and dual rear ramp locks, very secure, all powder coated black, Spring loaded rear ramp for easy opening and closing, 1135KG Ramp capacity, Black framed sliding window, Prewi

Custom Built Pantech Race Car Trailer Max Width, 5.7m long, 400l water tank Workbench with vice

Price DROP, this is the cheapest fully enclosed two car carrier of its type in Australia. New build now is over $100k for the same set up. Two Car enclosed Trailer, fifth wheel. Originally built to carry two TA2 Cars, recently used for Two Corvettes, now excess to requirements. Very well set up with plenty of room and could easily be modifed to suit multiple purposes. ATM 7000kg Overall length pin to tailgate – 12m Overall external height (while on the leg not connected to the truck) – 2

Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)