64 items for sale

RaceKing Car Trailer+ ali stone guard, spare wheel+wheel holder, additional led lights & licensed. It lowers to the ground for safe loading without ramps, manufactured in Australia. Weighing in at just 350kg. Fully hot-dip galvanized frame for ultra long life Precision fabricated from laser cut Aust steel Lowers to less than 4 degrees of loading angle without ramps or tilting Removable draw bar for minimum trailer storage space Raises to elevated vehicle maintenance position with safety link St

Ex Indy 500 racer, chassis # H-64172. One of the very first, of the rear engined Indycar’s, built by the legendary “Magnesium master”, Mike Halibrand, for Dan Gurney’s “All American Racers” (AAR). Raced in 1965 by multiple USAC Champion Roger McLuskey at; 1) Phoenix, March 28th, finished 21st. 2) Indy 500, May 31st, Finished 30th. 3) Hoosier Gran Prix July 26th, finished 3rd. 4) Atlanta 250, August 1st, finished 9th. 5) Milwaukee 150, August 14th, finished 5th. 6) Milwaukee 200, August 22nd,

3.5t flat top galvanized trailer. 3600mm table top X 2400mm Has a 1t Maxilift 110 crane mounted on it, in good working condition. double axes, electric brakes, ramps, side panels. 6 anchors points on table top. Double layer frame for sturdiness. Built Dec 2022 Selling due to retirement: $20000 ono Will provide all infos to buyer

Excellent condition, hot dip galvanized, registered till 31/3/27 Tray 3.65 x 1.8m

Custom-built trailer designed to run behind a tilt tray or 2500. Built for regular interstate work and has travelled the east coast weekly for the past 12 months without issue. Specs: • 9m long x 2.5m wide • Currently rated to 4.5T • Built with future air-brake upgrade in mind (currently electric brakes) • Chassis rails: 200 x 100 x 6mm • Drawbar: 100 x 150 x 6mm • Car carrier plate down both sides • Chequer plate centre • Chain plates throughout • Recessed posts for removable rails • Under-f

2023 Tilta Trailer Tandem Full Floor Slotted Deck Car Trailer As new has only been used for transport of radical 12 times for track days Has custom made engineer built ally ramps for extra low cars: 3 deg load angle The trailer has the following accessories: Electric winch with remote Tyre rack Stone guard Jerry can holder x 2 Drawbar tool box Two full sets of tie down straps Purchased from original owner and not used since due to unfinished race car build * radical not for sale

J&J ex donny schatz tall boy wingless sprint complete with spares package and heaps of extras to go with car if required car chassis checked and straight freshly powder coated and fully painted gloss black has full bmrs lines, car and engine full of titanium and sealed , titanium throttle pedal and brake pedal and rock screen 6 into 1 pipes, dmi xr2 diff swivel drive fully rebuilt with new pinion and crown wheel new lower shaft and swivel drive , wilwood brakes, dmi torque tube and ball, ste

Car Trailer For Sale (suit medium sized cars): 4020mm usable length tray 1770mm usable width tray Weight 700kg Max Carry 1300kg New Brakes Custom Wheel carrier Custom Jerry Can holders HD Tie downs added Winch included

Dual axle beaver tail car trailer with ramps. Large nose cone/tool box/spares storage. LED lights, battery charger, 12 volt winch, spare tyre storage. 14” ford stud pattern, disc brakes on front axle. Tare 660kg GVM 2000kg Deck length 4.3mts, 1980mm between guards. All in excellent condition. Tows good, reg till Feb 2027

Custom small car trailer with secure tool and equipment storage ... pre load all of your tools and equipment so you can hook up and get going on the morning of your event .... Keep everything secure for those overnighters Tandem 2800Kg- beaver tail, electric brakes with brake away unit - separately switched rear-front-canopy lighting- on board battery/vehicle charging - electric roller shutter, electric winch, trolly jack holder, access ramps for toolbox, lock and load tie down system, safety

Fully refurbished presents like new. Excellent condition. Professionally built Tows fantastic with long draw bar Multi purpose trailer Many tie down points Tyres 70/80 % Spare wheel Folding Jockey wheel Has under floor stainless water tank for wash down Led lights Registered till october Vin plate. 130 x 250 8 ft 3. 4 ft 3. Negotiable for quick sale

Dual axle open trailer. Suits a variety of different cars It’s had formula 1 , formula 2, Group C Prototype, Sports sedan even Pre war cars. Has two spare wheels and a large metal storage trunk at the front. There is a flat floor section under the main structure for spare wheels. Currently has had a manual winch which has worked well with all of the different cars Two built in spots for Jerry cans. One pair of long aluminium ramps one pair of shorter ones. Perfect for wide cars that just do

B.M.I. CT 32 FF Open Car Trailer – 3.2t ATM (Full Floor) The standout feature of this trailer is its fully galvanised, anti-corrosion body, delivering a strong yet lightweight construction designed to perform and last—even on rough road surfaces. With its airbag supported tilt function, loading ramps, and low fenders, this trailer allows for easy loading, including very low vehicles. The load-sharing suspension with integrated shock absorbers ensures excellent towing stability while protecting

Home Made Trailer More Details to Come Inspection at Rooty Hill

Single axle Tilta trailer 2020 build with all options including extra wide tracks, jerry can holder, stone guard, tool box (not fitted) & winch. Carries up to 1200kg & is 1.85 between guards. Excellent condition and only selling due to buying a bigger Tilta trailer.

Complete ready to race wingless, maxim 88/41 & 1” raised rail chassis, with all spare you need to race & extras. Kirkey 14.5” seat, engine built by OCD tuning(Nigel) only done one complete season, DMI diff & KRE half steering box. Have all set up blocks, stands, fuel churns & wheel brace. Transponder included.

B.M.I. CT 20 HF Open Car Trailer – 2.0t ATM (Half Floor) AUD 10,999 incl. GST The standout feature of this trailer is its fully galvanised, anti-corrosion body, delivering a strong yet lightweight construction designed to perform and last—even on rough road surfaces. With its tilt function, loading ramps, and low fenders, this trailer allows for easy loading, including very low vehicles. The load-sharing suspension with integrated shock absorbers ensures excellent towing stability while protec

A very unique one-off eye-catching sleek designed car or machinery trailer is offered for sale by Lockyer Trailers. An exceptional craftsman built, robust trailer with no expense spared. Finished in dark charcoal Raptor coat for extreme durability, combined with sections of coloured composite aluminium panelling to create a striking and appealing result. The aerodynamic design of the front protection cone system provides an extremely fuel-efficient towing trailer. Loading ramps integrated into