248 items with Roll Cage for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
10
Roll CageLog Book
Yacar Cross karts - Suzuki GSXR 750 Spanish Built and comes with Motorsport Australia Logbook as FL ready to race Cross karts can be used on both asphalt and gravel with little work to change setup to suit Karts can come in 600cc - 750cc or 1000cc models Standard Spec - Ohlins TTX 3 way suspension - Adjustable brake bias - LED Gear display - Adjustable pedal box - Perspex Window & Mesh cages - Hydraulic handbrake - OMP bucket seats with adjustable positions - 6 point harness to suit
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
8
Roll Cage
Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt
14
Roll CageLog Book
FINAL PRICE DROP!! Log Booked 2022 Subaru BRZ. Why spend $50K on a bashed up old T86/BRZ. Shake down at last year's Challenge Bathurst. Only 5000kms on the clock. 800kms since build complete. Build includes: - New Brown Davis Roll cage - New Racetech Seat - New RPM 6pt Race Harness - New Sparco wheel and Quick Release Hub - New 6 Port Isolator fitted - New Radium dual catch cans fitted - New MCA Red Coilovers fitted - New 4 Pot AP Racing 5000R calipers at the front and 2 Pot APs at the rear.
3 1
Roll CageLog Book
Improved Production RX3. 13B O'Dell Fontana bridge port. Laird manifold. Motec. Aim dash with full logging. 5 speed dog box. Hilux rear end, floating axles, cambered. MCA 3 way adjustable gold shocks. Spare set of wheels, flares, spoilers and moulds. Wilwood brakes.
6
Roll CageLog Book
Reluctant sale but it’s time to move on. Finally concluded I just don’t have the time or energy anymore to go racing. Grandkids have taken over. Built in 98. First raced in 99. Have been upgrading since. Lots of fun in a fast, consistent car. CAMS Log book 3J for Improved Production issued 1998 Mitsubishi 4G54 Engine (bored to 2.8) Dyno’d to 182 RWHP Lightened pistons M6 Head (Ported, Polished and Flow Tested) Twin Weber 45 DCOE Carburettor’s Custom camshaft Custom Intake manifold Custom
11 1
Roll CageLog Book
Subaru WRX Race Car MY04 Java Black Pearl Race/Track/Tarmac rally EJ20 re-built with STI heads + Cams Race pistons + rods, and bearings (by STI Docklands) Custom built ATP High Flowed VF34 Turbo with upgrade MFS Billet CW STI ECU tuned by RE Motorsports AVO pod filter and Cold air induction Custom intercooler spray system New 5 speed gearbox installed April 2024. ADS Level 4 - Hybrid Spec 3 Exedy Racing Sports Organic Clutch Kit AP Racing brakes (front). Plenty on pads (Ferodo DS3000) Rear diff
16 1
Roll CageLog Book
Imported to Australia after being purchased from the Larry Wilson Collection in Florida late January 2021 Presents as a 1 owner car extensively developed over a period of many years into a serious 993RSR race car with no expense spared by Larry and his team of talented craftsman. Car features removable carbon fibre body panels fitted over a modified chassis, and is powered by a fuel-injected 3.8L flat-six paired with a six-speed manual transaxle sourced from a 996 GT3. Additional equipment in
59
Roll CageLog Book
1957 Jaguar "D-Type" 3.8L Long Nose Tribute/Replica - Exact "Ecurie Ecosse" Winning 1957 Le Mans Factory Team Race Car - Exact Re-Creation We are extremely proud and honoured to offer you this very special opportunity in securing one of the most significant "tribute" race/classic cars of our time. This is as close as you can and will get to owning the "Le Mans Winning" 1957 Jaguar D-Type "Long Nose" which came 1st place at Le Mans piloted by Scottish team Ecurie Ecosse works driver Ron Flockhar
119 1
Roll CageLog Book
Think GT3 racing and it is impossible not to think of the Audi R8 LMS GT3. One of the most successful GT3 race cars of the modern era, it has amassed 83 drivers’ titles internationally and 106 championship victories – as well as eight overall victories in 12-hour races (including a record three at the Bathurst 12-Hour) and 13, 24-hour victories. It more than meets the challenges posed on all racetracks in all climatic zones and has won titles in Saudi Arabia as well as in Europe, Asia, Australi
10
Roll Cage
Hi, I have for sale my 2010 WRX Sti Spec R hatch with 80000km on the clock. I have owned the car for 3 years and it has been my dedicated track car for the last 2 years, previously being a registered street car. The vehicle is fitted with everything you need to reliably compete at club level track days, autokhana, time attack or rally sprints etc. and has had an Ecutek dyno tune by Maximum Motorsport after all engine work was completed. The car has been maintained to the highest standards by mys
14
Roll Cage
URD-BMW C81 World Endurance Racing Group C Racing Sports Car. Make/Model URD-BMW C81. Year: 1982 Chassis: 5P 001 Constructor: Ungar Racing Development (URD) in Gradenau (Stuttgart) Germany. Designer: Ernest Ungar Chassis: Multi-tubular steel square section tubes with riveted aluminum sheets at cockpit and front box for pedal box. This is a reinforced space-frame, flat bottom Group C, Endurance Sports Car. Engine: BMW 3497cc, M88 (M1) S6 In-line Six, 490 bhp with Kugelfisher Bosch
6
Roll CageLog Book
1980 TIGA SC80 S2000 Sports Racing Car. Chassis: Aluminum Monocoque with tube Bulkheads and engine bay Engine: Ford Pinto 2,0L SOHC Gearbox: Hewland Mk9 (dog box) 4 Speed Transaxial gearbox. Has a Motorsport Australia Logbook and C of D. This car originally campaigned in North American SCCA Oregon Northwest Region and British Columbia, Canada. In 2013 the car was completely re-built and re-tubed by Marc Bahner Engineering in USA, fitted with a new light weight fiberglass bodywork. A number
5
Roll CageLog Book
1973 Brabham bt41 Formula 3 Race Car. 1600cc Novamotor Twin Cam with 45 Twin Side Draught Weber DCOE Carburettors Gearbox: 5 speed Hewland Mk9 (dog box) Transaxial gearbox. Chassis: Aluminum Monochrome with steel tube bulkhead and engine bay with rear selection Tubular Space frame. Bodywork: Fiberglass with front and rear wing aerodynamic aids Comes with CAMS C of D and Logbook. Alberto Colombo campaigned this car in the 1973 Italian F3 Championship with six wins in the 1973 Championship E
8
Roll CageLog Book
Astra CDTi production car, Holden factory race car built by PMM for the 2007 Bathurst 12 hour sponsored by Bendon, built to showcase the power of the new diesel Astra. Also competed in the 2009 12 hour for the Holdsworth family, did some production racing for a few years after but more recently just used as a fun track car. Very well built, 6 speed, DMS suspension, Racetech seat, Performance Box with power and external antenna, we use ex Toyota 86 semi slicks for very cheap fun. Would need harne
20
Roll Cage
Just pick up, drive to the track and race your Subaru STI Time Attack Racecar
Highlights include
- MY05 STi Shell - ABW Motorsport wide body kit and doors, Plexiglass Windows, dry carbon roof
- Full weld-in roll cage - OMP Seat with head restraint
- Lifeline fire extinguisher with Novec Pressure System
- 800HP/900NM PerFOURmance 2.5l with custom heads and fire lock head gasket and dry sump
- Titanium custom 3.5-inch exhaust - PWR custom intercooler, radiator, and oil cooling package desi
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
42
Roll Cage
Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh
10
Roll CageLog Book
Race ready! Regretful sale of my Mygale formula ford and spares due to life commitments. Vehicle is a 1995 Mygale SJ95 Formula Ford with a Ford Kent Crossflow engine. It is chassis number 2 which is pretty awesome for a collector and it's an ex-Team Australia car. Would be an awesome collectors item. Vehicle was purchased mid 2023 and was brought up to spec to compete in 2024 with a new dash, rain light, and other misc bits. Has only done a handful of test days in my possession and drove great
19
Roll CageLog Book
Porsche 718 GT4 Clubsport Competition Race Car Never been raced No accident history 3 sets of wheels and tyres (1 set with near new wets) Air Jacks Spare brake pads Passenger seat installed 10,800kms Stilo radio pictured not included Fully maintained by Porsche Doncaster and ready to go.