62 Sedan Race Cars for sale

MAZDA RX7 - BUILT IN 2016 - CAMS LOG BOOKED ROLL CAGE BUILT FOR RELIABLITY -13B BRIDGEPORT 2ND PLACE BATHURST CHALLENGE 2019 1ST PLACE OVERALL REPLICA TOURERS 2021 NEW ENGINE BUILT BY SIMON @ MACGREGOR MECHANICAL NISSAN SKYLINE FRONT BRAKES INJECTION PERFECTION MICRO TECH DASH SERIES 3 LIMITED SLIP DIFF - STRONG RELIABLE CAR NEW FUEL PUMP UPGRAGED SET UP. LIGHT WEIGHT COULD EASILY ADD GROUP C FLARES & WHEELS FOR A MOCK UP. PLENTY OF SPARES,INCL BONNETS,GUARDS,DASHBOARDS,NEW SPARE FRONT SPOILER

FORD FALCON XW GTHO SUPERFALCON TRIBUTE TOURING CAR Raced by Steve Johnson in the Touring Car Masters to many Wins in 2016. The Car has been fully rebuilt and Race Prepped by Scott Owen Race Developments (SORD - Glen Seton Supercar Engineer). Fresh SYNERGY 700hp BOSS 351, G-Force dog Box, Cambered 9 inch, Brembo 4 spots, AP pedals, V box in car. The car is Ready to race in this year's Touring Car Masters. Multiple Class Wins, 4th and 6th overall at Bathurst. Outright 2nd recently at Sandown V8

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy

This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manuals Two Race Tech seats (great for t

FORD FOCUS RS AWD LE Purchased new 2018 - 1 owner. 2018 FORD FOCUS RS LE 2.3 TURBO AWD. MODDED FOR HILL CLIMB COMPETITION. ORIGINAL 3,000 KM'S ONLY (3,000 - NOT 30,000) MISHIMOTO INTAKE & INTERCOOLER PIPES K & N AIR FILTER IN MISHIMOTO AIR BOX. (COMES WITH MISHIMOTO INTERCOOLER - NOT FITTED) COBB CUSTOM TUNE & HAND HELD CONTROLLER. LED SHIFT LIGHT. "AUTO THROTTLE BLIP" FITTED FOR DOWN SHIFTS. X-FORCE TURBO BACK EXHAUST WITH REMOTE CONTROL REAR MUFFLER FLAP. 257 WHEEL KW'S. QUAIFE FRONT LSD (F

Ford Mustang Motorsport log booked 3 E 2021 body with 2017 running gear. 5.0L Coyote engine dyno at 443 HP 6 speed manual gear box Cams approved cage Full log booked Super shocks coilovers New race seat 6 point harness 18x11 light weight wheels from racing USA New tuned extractors and exhaust New build not yet been on track Built in house at Steve Hay Racing Can be run in Replica Tourers QTTC sports sedans and Bathurst 6 hour . Car as done one race meeting at Lakeside race way with 4 wi

Selling a complete turnkey opportunity! Log booked 3E Production Race Car and 2018 model Phoenix Tilt car trailer, including all spares as listed below Engine rebuilt in 2023 CP Bullet Forged Pistons and H beam Conrods ACL Race B/E ACL Race Main 360 deg 12mm APR 2000 head studs APR Main studs Barra Oil Pump backing plate Billet Oil Pump Gears Kelford Cams KV218A Kelford Valve Springs KVS4 Factory Rockers and Rollers New water pump All new pulleys All receipts for engine build will be pr

Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.

Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe with tags. It also still has the original VIC rego plate and CAMS log book. The car originally ran a Mazda Factory Race (MF

AMERICAN LEGEND CAR 34 FORD SEDAN 160 AS RACED LAST SEASON BY BRUCE DUCKWORTH FRESH 2 MEETINGS ON THE ENGINE TOP ENGINE COOLER FANS READY TO RACE FOR THE NEW SEASON OF HI TECH OILS SUPER SERIES SELLING DUE TO NEW CAR

FORD FALCON FPV-GT. 2008 I am selling this car on behalf of my late Brother in Law’s Estate The information I am giving is from paperwork that I have found and what I can see walking around the car . The car was built Chris Sexton, Lakeside Raceway from a New Road Car spending in excess of $90,000 to comply with Production Cars Australia Championship. It’s first race was in 2009 Bathurst 12hr driven by Steven Johnson for Tinkler Racing , it finished 30th Outright and 10th in its class du